Category: 4G Technology

Netgear M1 Share Media and Storage

You can use the Netgear M1 mobile router to share media and storage devices. The mobile router supports MyMedia on mobile devices. You can insert a USB storage device in the mobile router USB type A port and you can install a micro SD card in the mobile router.

The chapter includes the following sections:

  • Manage Shared Storage Devices
  • Install a Micro SD Card
  • View Storage Device Usage and Capacity
  • Upload Media Files to Mobile Router Storage
  • Play Media

 

Manage Shared Storage Devices

You can insert a USB storage device in the mobile router USB type A port and you can install a micro SD card in the mobile router. You can access the files and folders on these devices from computers and mobile devices that are connected to the mobile router network.

USB Device Requirements

The router works with most USB-compliant external flash and hard drives. Some USB external hard drives and flash drives require you to load the drivers onto the computer before the computer can access the USB device. Such USB devices do not work with the LTE router.

The router supports the following file system types for full read/write access:

  • FAT16
  • FAT32

When you purchase a USB storage device, the package typically identifies its format. For information about how to format a USB storage device using a Windows or Mac computer, consult the help instructions for your computer or operating system.

 

 

 

Connect a USB Storage Device

You can access and share a USB storage device connected to the mobile router USB type A port. (If your storage device uses special drivers, it is not compatible.) You can continue use the micro USB port to charge the mobile router or for a tethered connection.

To connect a USB storage device:

  1. Insert your USB storage drive into a USB port on the router.
  2. If your USB device uses a power supply, connect it.

You must use the power supply when you connect the USB device to the router.

When you connect the USB device to the router USB port, it might take up to two minutes before it is ready for sharing.

 

 

Micro SD Card Requirements

The mobile router supports SD cards up to 128 GB in the following formats:

  • FAT
  • FAT-16
  • FAT-32

———————————————————–Note: For information about how to format a USB storage device using a computer or other device, consult the instructions that came with your computer or device.

———————————————————–

Formatting the USB storage device erases all data on the device.

 

 

 

Install a Micro SD Card

Micro SD cards are sold separately.

To install the micro SD card:

  1. Obtain a micro SD card (sold separately).
  2. Make sure that power to the mobile router is off.
  3. Remove the cover on the bottom of the mobile router.

Place your thumbs on the arrows on the cover and press down while sliding the cover up.

  1. Insert the micro SD card into the micro SD slot.

Replace the mobile router cover.

 

 

 

View Storage Device Usage and Capacity

You can view the storage capacity for a USB storage device attached to the mobile router and a micro SD card installed in the mobile router.

To view storage device capacity and usage:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Storage.

The Storage page displays the used and available storage for each connected device.

 

 

Upload Media Files to Netgear Nighthawk Mobile Router Storage

You can upload media files to either a micro SD card or a USB storage device connected to the mobile router. Micro SD cards and USB drives are sold separately.

To upload media files onto a storage device:

  1. Insert the storage device into the mobile router.

You can install a micro SD card and you can attach a USB storage device to the USB port. If your USB device uses a power supply, connect it. You must use the power supply when you connect the USB device to the router.

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Click the MyMedia tab.
  2. Drag and drop your files on to the page.

 

 

 

 

Play Media

The NETGEAR Mobile app includes a MyMedia shortcut that displays categories of supported media types to play back. You can connect any DLNA-compatible client to the mobile router. This includes computers running Windows Media Player and other DLNA–enabled devices such as smart TVs.

To play media using the NETGEAR Mobile app:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Storage.

The Storage page displays the used and available storage for each connected device.

  1. Tap MyMedia.

The MyMedia shortcut displays categories of supported media types to play back.

  1. Select the media to play.

A list of devices on the network displays. You are prompted to select a device on which to play your media.

  1. Select the device on which to play the media.

The media plays on the selected device.

How to Update Netgear Nighthawk M1 Firmware

There are three methods to update the Nighthawk M1 firmware as below:

Update Netgear Nighthawk M1 Mobile Router Firmware

The Netgear Nighthawk M1 mobile router automatically checks for new firmware updates. If an update becomes available, the mobile router displays an alert. You can also check for updates manually without receiving an alert.

Update Firmware from an Alert

To update the firmware:

  1. Open the alert.
  2. Click the Download button.

When the download completes, the mobile router displays an alert with an Install now button.

  1. Click the Install now button.

The update installs. The mobile router reboots automatically and uses the new software.

 

Update Firmware from the NETGEAR Mobile App

To update firmware using the NETGEAR Mobile app:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Settings > Firmware.

The Firmware page displays.

  1. Tap CHECK FOR UPDATE.

The mobile router checks for firmware updates. If an updated is available, it is automatically downloaded.

  1. Tap INSTALL UPDATE.

After the update install completes, a success message displays.

 

Update the Firmware from the Web Page

To update firmware using the mobile router web page:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays. If a firmware update is available, a blue INSTALL NEW FIRMWARE link displays on the right.

  1. Click the INSTALL NEW FIRMWARE link.

The update downloads.

  1. Follow the onscreen instructions to install the update.

After the update completes, the mobile router reboots.

 

Check more user manual about Netgear Nighthawk M1 MR1100 Settings here:

https://www.4gltemall.com/netgear-nighthawk-m1-mr1100.html

Netgear Nighthawk M1 Troubleshooting

This chapter provides suggestions for troubleshooting problems that might arise when you are using your Netgear Nighthawk M1 mobile router. The chapter covers the following topics:

  • Diagnostics
  • The WiFi Network Name Is Not in the List of Networks
  • The No Signal Icon Displays
  • Cannot Log In to the Mobile Router Using a VPN
  • The Mobile Router Cannot Connect to a Computer Running Windows Vista
  • The Mobile Router Does Not Connect to the Cellular Network

 

Diagnostics of Netgear Nighthawk M1

To view diagnostics:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Mobile Router Status > DIAGNOSTICS.

The Diagnostics page displays.

 

 

 

The WiFi Network Name Is Not in the List of Networks

If you do not see the Netgear Nighthawk M1 mobile router’s WiFi networks from your computer or mobile device, try these suggestions:

  • Refresh the list of networks.
  • If the LCD is dark, the WiFi radio might be asleep. Press the Power button to wake the M1 mobile router.
  • If the mobile router is tethered to your computer, make sure that WiFi is set to stay on when the mobile router is tethered. See Use the USB Type C Cable to Charge Only in How to Use Netgear Nighthawk M1 Router.

 

 

 

The No Signal Icon Displays

If the No Signal icon displays on either the LCD or the mobile router web page, make sure that you are in your network service provider’s coverage area.

Cannot Log In to the Mobile Router Using a VPN

If you are using your mobile router while connected to a VPN, you might not be able to access the mobile router web page using http://m.home.

To directly access the mobile router web page hosted on the device, enter the address http://192.168.1.1 in your browser.

 

 

 

The Mobile Router Cannot Connect to a Computer Running Windows Vista

A known issue exists whereby computers running Microsoft Windows Vista cannot obtain an IP address from certain 4G routers. More information and a fix are available at support.microsoft.com/kb/928233, or visit the Microsoft support website and search for knowledge base article 928233.

 

 

 

The Mobile Router Does Not Connect to the Cellular Network

If your Nighthawk M1 mobile router does not connect to your service provider’s mobile broadband network, try the following suggestions:

  • Make sure that your SIM account is active. To check SIM status, contact your Internet service provider.
  • If you use a prepaid SIM card, make sure that the account balance is positive.
  • If your mobile router still does not connect, you might need to create or update the default connection profile.
  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1. A login page displays.
  3. Enter the mobile router password. The password is case-sensitive. The dashboard displays.
  4. Select Settings > Advanced Settings > Cellular. The Cellular page displays.
  5. In the APN section, review the ISP settings.
  6. To change the active APN or to change the APN settings, click the Edit icon.

For more information about changing these settings, see Specify Cellular Settings .

Netgear Aircard 815s (AT&T Unite Explore) Review

If you are a hiker or usually go to the outdoor field for activities, you must get to know AT&T Unite Explore, also named as Netgear Aircard 815s. Even though many mobile smartphones have the hotspot function, after reading this article, you will know the features, specs, network, signal advantages, battery, touch screen, the chipset of the Netgear AC815s and how you should take one for your family or group when wireless internet is necessary.

 

Rugged design for outdoor use

Netgear AC815S modem is the world’s first LTE mobile hotspot with rugged design covered in rubber bumpers, which makes it dustproof, shock and water-resistant. Like its predecessor Aircard 810s, Aircard 815s modem has a simplified 2.4inch touch screen, where users can quickly check the most important is that user can do simple settings through the touch screen like operating a smartphone. The USB 3.0 connector of Netgear Aircard 815s can make it work like a 4G USB modem when connecting with a PC. What’s more, there are two connectors for 4G external antenna, which is also important when the device is using in a rural area or even in the forest.

Large Battery can charge other devices

Another highlight feature is the large battery – Netgear had assigned a removable battery of 4340mAh, which could keep working for around 22 hours and standby time up to 576 hours. If you think this is not enough, you can keep a spare battery for exchange and charging. In this way, the Netgear AC815 could keep working all day long and you don’t need worry of power-off. In addition, aircard 815s could charge other devices based on “Jump Boost” function called by Netgear, i.e it can work like a mobile power bank, which is also very useful for other electronics.

LTE Category 9 Modem

Like the Netgear Aircard 800s, Netgear 815S also supports LTE advanced network on LTE Cat.9 with the latest Qualcomm X12 modem, which could support 3 x carrier aggregation technology with peak download speed to 450mbps. As a WiFi hotspot, Aircard 815s could support maximum 15 WiFi-enabled devices simultaneously. This quantity is enough for most cases in a group or family. The Netgear AC815S hotspot supports LTE bands 1/2/3/4/5/7/12/17/29/30 and HSPA 850/1900/2100MHz, which makes it could work well in most countries of the world.

 

802.11ac with dual band and Multiple SSID & Guest WiFi

Like the brother model Aircard 810s, Netgear AC815S would increase network performance and reduce interference with 802.11ac and Dual-Band 2.4 GHz/5 GHz WiFi. What’s more, it could support multiple SSID and guest WiFi function, which is usually available for high-level LTE mobile hotspots. In addition, the WPN (WiFi Protected Setup) feature is available.

 

Below are the features and characteristics for Netgear AC815S for reference:

 

Features and Specs of AT&T Unite Explore
Manufacturer and type Netgear AC815S
Chipset Qualcomm® Snapdragon™ X12 LTE Modem (MDM9240)
LTE category LTE Cat.9
Download rate up to 450 Mbit/s
Upload rate up to 50 Mbit/s
Supported LTE bands B1, B2, B3, B4, B5, B7, B12, B17, B29, and B30
Downwards compatible with GSM, EDGE, HSDPA, DC-HSPA+
Support 3G Bands 850/900/1900/2100MHz
Support for LTE-Advanced Yes
MIMO Support Yes, 2×2 MIMO
SIM Type Micro-SIM (3FF)
Connection for external antenna Yes, two TS-9 connectors(Buy Aircard 815S Antenna)
Network | LAN & WLAN
LAN Ports No
WLAN Standards 802.11 b/g/n/ac (dual-band 2.4 and 5 GHz)
5 GHz WLAN Support Yes
Multiple SSID/Guest WiFi Support Yes
Encryption WPS/WPA/WPA2
WLAN Hotspot Function Support maximum up to 15 users
Telephone
With integrated telephone system no
Connector for ISDN telephones no
Connection for analog telephones no
DECT no
integrator answering machine no
Others
IPv6 Dual Stack No
Battery Capacity 4340 mAh, Up to 22 hours of continuous usage
Battery Removable Yes
Battery Standby time 576 hours (typical)
Dimension 113.5 mm x 71 mm x 20 mm
Weight 178.5 g (with battery)
USB USB 3.0 compliant
Memory Card Expansion No
Release 2016
Price 349.00USD for unlocked Netgear AC815S
available at »AT&T and https://www.4gltemall.com/
File Download
Quick start guide » Download Netgear Aircard 815s specs(PDF)
Detailed manual » Download AT&T Unite Explore manual(PDF)

 

 

Conclusion

Netgear Aircard 815s is a rugged mobile 4G router based on Qualcomm X12 chipset and supports of LTE advanced network to get fast speed connection on WLAN 802.11ac dual bands. The supported frequency bands make it travel freely over the world. And large battery could keep itself working for a long time and charge other terminals. The dual connectors for the external antenna are also very useful features when a device is working at weak signal areas. All the features make aircard 815s a perfect gadget for outdoor use. Of course, as a top mobile LTE router, the Netgear AC815s price is not cheap now comparing with earlier LTE mobile hotspots. However, considering the special design, powerful function, the Aircard 815s is worth the price.

Netgear Aircard 800s (Optus 4G Wi-Fi Modem) Review

As Netgear’s first LTE category 9 mobile hotspot, Aircard 800s has improved configuration for LTE Advanced networks. Netgear Aircard 800s was already available for Australian network provider Optus and named it as Optus 4G WiFi Modem AC800S. With the support of LTE Cat.9 and 3 band carrier aggregation technology, Netgear AC800S could achieve download speed to 450mbps and upload speed to 50mbps, which is triple faster than that of LTE Cat.4 mobile hotspots. The AC800S Netgear could provide LTE Advanced connectivity, swift application response times, reliable connectivity and a better overall user experience for buffering data-heavy programs such as multimedia and video files.

User-friendly Touch Screen

Netgear AC800S modem is not only fast for wireless internet connection but also extremely user-friendly. Like its predecessor Netgear Aircard 810s, Aircard 800s modem has a simplified touch screen, where users can see the important information about the internet, such as the signal strength, network provider name, battery status, data consumed, WiFi SSID and password, WiFi connected user quantity, SMS, and settings etc.. The most important is that user can do simple settings through the touch screen like operating a smartphone. The Netgear Aircard 800s is well positioned to offer you a superior mobile broadband experience like never before.

Below are the features and characteristics for Netgear AC800S for reference:

 

Features and characteristics of Netgear Aircard 800S
Manufacturer and type Netgear AC800S
Chipset Qualcomm Cortex-A7
LTE category LTE Cat.9
Download rate up to 450 Mbit/s
Upload rate up to 50 Mbit/s
Supported LTE bands 700 (B28), 1800 (B3), 2100 (B1), 2300 (B40), 2600 (B7)
Downwards compatible with GSM, EDGE, HSDPA, DC-HSPA+
Support 3G Bands 900/2100 MHz
Support for LTE-Advanced Yes
MIMO Support Yes, 2×2 MIMO
SIM Type Micro-SIM (3FF)
Connection for external antenna Yes, two TS-9 connectors(Buy Netgear AC800S Antenna)
Network | LAN & WLAN
LAN Ports No
WLAN Standards 802.11 b/g/n/ac (dual-band 2.4 and 5 GHz)
5 GHz WLAN Support Yes
Multiple SSID/Guest WiFi Support Yes
Encryption WPS/WPA/WPA2
WLAN Hotspot Function Support maximum up to 15 users
Telephone
With integrated telephone system no
Connector for ISDN telephones no
Connection for analog telephones no
DECT no
integrator answering machine no
Others
IPv6 Dual Stack No
Battery Capacity 2930 mAh, Up to 11 hours of continuous usage
Battery Removable Yes
Battery Standby time 260 hours (typical)
Dimension 110 (L) x 68 (W) x 16.1 (H) mm
Weight 82 g (without battery), 132 g (with battery)
USB USB 3.0 compliant charging cable
Memory Card Expansion No
Release Apr 2017
Price 199.00USD for unlocked version
available at »Optus and www.4gltemall.com
File Download
Quick start guide » Download Netgear Aircard 800s spec(PDF)
Detailed manual » Download Netgear AC800s manual(PDF)

 

LTE Category 9 Modem

The Netgear 800S is designed to support LTE advanced network with LTE Category 9 and CA technology, which could support peak download speed to 450mbps. As a WiFi hotspot, Aircard 800 could support maximum 11 WiFi-enabled devices simultaneously. However, for many users, the carrier deployed networks have not reached LTE advanced. So Netgear Aircard 800s is a future-proof mobile router.

WLAN Standard 802.11ac with dual band

Netgear AC800S would increase network performance and reduce interference with 802.11ac and Dual-Band 2.4 GHz/5 GHz WiFi. What’s more, it could support multiple SSID and guest WiFi function, which is usually available for high-level LTE mobile hotspots. In addition, the WPN (WiFi Protected Setup) feature is available.

 

Other features

The Aircard 800 modem has a removable battery of 2930mAh, which could keep working for 11 hours and standby time could last for 260 hours. The battery can make Netgear 800s work like a power bank to charge other electric devices, which Netgear call it “Jump Boost” function. With the device, the Jump Boost cable is provided. Like other Netgear 4G mobile routers, Aircard 800s also has two connectors(TS-9 type) for a 4G external antenna.

 

Summary

Netgear Aircard 800s is a high-level mobile 4g router with the support of LTE advanced network to get fast speed connection on WLAN 802.11ac dual bands. The large battery could keep itself working for a long time and charge other terminals. The dual connectors for the external antenna are also very useful features for the people located at weak signal areas. The Netgear AC800s price is not expensive comparing with same level LTE-A mobile hotspots. If you want to buy an LTE-A mobile hotspot with good price, the Netgear AC800S is a good one to consider.

 

To buy Netgear Aircard 800s (unlocked), click here: https://www.4gltemall.com/netgear-aircard-800s-lte-cat-9-mobile-hotspot.html

Huawei E5788 VS ZTE MF980

With the development of LTE technology, LTE networks are evolving from basic to advanced, or LTE advanced Pro. To support the high-level LTE networks, many manufacturers are presenting their new LTE-A products to accomplishing the data transmission. Huawei, as the top telecom equipment supplier, had recently released the latest new LTE mobile hotspot E5788, the model number is E5788u-96a. The other Chinese competitor ZTE also has its own LTE advanced mobile hotspots named ZTE UFi MF980. You may ask what the difference between Huawei E5788 and ZTE MF980 is. And you want to select one between the two mobile routers, which one is better. In this article, you will find the answers.

Appearance

ZTE MF980 is earlier released than Huawei E5788. But the shape of the two LTE gadgets looks very similar. They are both in cuboids shape, but very thin. The Huawei E5788 has a 2.44-inch color touchscreen, where the user can easily set up the router on the screen. The screen of ZTE MF980 is 1.44 inch TFT screen, and the user can’t do settings on the screen. The Huawei E5788 screen is at the left part of the front while the ZTE MF980 has the screen in the middle.

The USB interface of ZTE MF980 is in Micro USB format while the Huawei E5788 using the USB 2.0 Type-C Interface. The MF980 has two connectors for external antennas while Huawei E5788 has no external antenna connector, which feature is a great disadvantage for the LTE Advanced Pro mobile hotspot. They both use SIM in Micro SIM size.

 

The batteries of both the two LTE mobile routers are non-removable. We think this feature is also not good comparing with another LTE-A pro mobile router Netgear Nighthawk M1, which has large battery capacity and could be removed for changing to spare battery.

As we know, the Huawei E5788 has many colors such as gold, black, blue etc. And the ZTE MF980 also has white, black colors which could be chosen for the customer’s preference. It’s good.

 

Specs

As the LTE advanced mobile hotspots, they both support high wireless download speed. ZTE MF980 supports LTE category 9 which could achieve download speed up to 450Mbps and upload speed to 50mbps while Huawei E5788 could support LTE Cat16 and could achieve download speed to 1Gigabit per second & upload speed more than 100mbps. They are both with WLAN standard on 802.11b/g/n/ac dual band (2.4Ghz & 5Ghz) and support maximum up to 32 wireless users. ZTE MF980 is with 2 x 2 MIMO technology while Huawei E5788 has 4 x 4 MIMO feature.

Below you will see the details for the Huawei E5788 Specs and ZTE MF980 Specs:

 

Model Huawei E5788u-96a ZTE MF980 Ufi
Product type LTE Mobile Hotspot LTE Mobile Hotspot
Category LTE Cat.16 LTE Cat.9
Chipset Qualcomm MDM9250 Qualcomm Cortex-A7 1.2GHz
Data rates DL 1Gbps/UL 100Mbps DL 450Mbps/UL 50Mbps
Supported 4G LTE frequency bands * FDD-LTE: Band 1/2/3/4/5/7/8/19/20/28
* TDD-LTE: Band 38/40/41/42		 * FDD-LTE: B1/B3/B5(26)/B7/B8/B20/B28/B32
* TDD-LTE: B40(or B38 or B41)
WiFi 802.11a/b/g/n/ac, dual-band 2.4GHz & 5GHz 802.11a/b/g/n/ac, dual-band 2.4GHz & 5GHz
Max support users 32 users 32 users
MIMO 4 X 4 MIMO 2 x 2 MIMO
Connector for external antenna No connector Two, TS-9 jacks
App management Huawei Hilink APP ZTELINK APP
SIM type Micro SIM Micro SIM
Battery 3000mAh 2200mAh
Dimensions 129 x 65 x 13.5mm  122 * 65 * 10.6mm
Other features 3CC+256QAM
Price 499.00USD 259.00USD

 

From the above, it’s no doubt that Huawei E5788 is more advanced than ZTE MF980 technically. However, the Huawei E5788 doesn’t have the connector for external antenna, which may not be a good news for the users who are located at the areas of weak signal. With the advanced features, Huawei E5788 price is much higher than the ZTE MF980. So if you just need a decent LTE pocket WiFi with high speed, ZTE MF980 is comparably budget one for most users. But we believe the price of Huawei E5788 would be down when 5G devices coming out.

Netgear Nighthawk M1 LTE Cat16 Gigabit Mobile 4G Router

Netgear has confirmed the distribution of the Netgear Nighthawk M1(MR1100) in Europe from mid-2017. It is obvious that many European operators are not yet ready to deliver Gigabit on their networks, but as time goes, things are moving forward. Nevertheless, the Netgear M1 has many advantages for aggregated carrier networks that deliver high speeds for up to 1 Gbps download.

The Nighthawk M1 is world’s first 4G LTE router offering download data rate of up to 1 Gbps. It is equipped with the Qualcomm X16 LTE modem announced in 2016. The Netgear M1 implements several technologies, starting with the aggregation of 4 carriers, a technology of 4 x 4 MIMO, and QAM-256 modulation. Here now, the Netgear Nighthawk M1 is only available for Australian network provider Telstra. And the US network carrier AT&T also introduced this LTE advanced Pro mobile router, but we haven’t gotten the AT&T Nighthawk M1. Of course, this equipment will be distributed in other regions as soon as the operator networks are well prepared for Gigabit transmission.

 

Technical Specs

The Netgear MR1100 is rather well equipped (not to mention that the Gigabit LTE remains a theoretical flow). A 2.4 “LCD display is present on the top and gives all the connectivity and flow information. The device also presents:

* 2 x external antenna connectors (type TS-9)

* A type A USB port

* A USB type C port

* An Ethernet port

The Netgear Nighthawk M1 provides the possibility to connect via Ethernet port, which means it can redistribute the link to devices with wired link. It remains completely mobile and equipped with a battery of 5000 mAh for mobile use, which could keep working for connection up to 24 hours. The battery can charge other mobile devices such as a smartphone if necessary as a backup. And this battery is removable, which allows to replace it and therefore spare battery can be charged in advance for travel.

 

Regarding the WLAN feature, Nighthawk M1 offers WiFi 802.11ac with dual-Band 2.4GHz / 5GHz. And the M1 can support up to 20 connected clients simultaneously. It also has a Micro SD card slot for storing and sharing media. It can be seen that connectivity is powerful in this router, which can connect many devices such as a NAS, printers, USB devices..

 

On the network side, the M1 offers a LTE-A link of category 16 using an aggregation of 4 carriers (4X4 MIMO) for a theoretical maximum throughput of 1 Gbps download and 150 Mbps upload.

Netgear Nighthawk M1 supported frequency bands (for Australian carrier Telstra):

* 4G FDD-LTE Band 1/3/7/8/28: 700/900/1800/2100/2600 MHz
* 3G Band:  850/900/1900/2100 MHz

The Telstra version Nighthawk M1 could work well in Europe areas.

Supported frequency bands for US carrier AT&T:

* 4G LTE Band 1/2/3/4/5/7/12/29/30/66

* 3G Band: 850/AWS/1900/2100MHz

 

The dimensions of the M1 are 105.5 × 105.5 x 20.35 mm for a weight of 240 grams.

Summary

 

This 4G LTE advanced router is very well equipped, offers the latest technology and has a really rich connectivity. Both for fixed use in an underserved area at high speeds and for mobile use in all situations, the Netgear Nighthawk M1 seems to the best mobile 4G router now in the market. We can’t wait to test it fully.

 

The price of Unlocked Netgear Nighthawk M1 available on www.4gltemall.com, if you want a powerful mobile router which could travel all over the world, it’s no doubt that the Nighthawk M1 is the right one.

Huawei B525 VS Huawei E5186

As the top telecom equipment supplier, Huawei 4G Routers are very popular in many countries based on high quality and stable performance for internet connection. And we also find some huawei wireless routers have similar specifications, i.e they support same LTE category, same LTE download speed etc. For example, we found Huawei had presented the LTE cat.6 routers such as Huawei B525 (new model) and E5186 (old model). Those who want to buy Huawei 4G LTE cat6 routers may feel confused which one to choose because they are too similar. Today, we will have a look at what’s the difference between the two Huawei LTE routers.

Huawei E5186 and B525 are both 4G LTE Wireless router supporting LTE CAT6, which means they both could achieve LTE download speed to 300mbps and upload speed to 50mbps technically. As the old model, huawei E5186 had been available for almost two years and very popular in Europe and Australia. The Huawei B525 was just available from second half of 2017.

 

Here now in the market, the most popular model for the two Huawei routers are Huawei B525s-23a and Huawei E5186s-22a. They cover the most common LTE frequency bands in Europe, Middle East and Asia. With support of LTE band 32, B525s-23a is more up to date than E5186. However, they both work for LTE-A network and have Ethernet interfaces for WAN & LAN. And as the typical feature for 4G LTE Routers, they both have the SIM card slot. So they are both 4G WiFi Routers with SIM card slot and Ethernet port.

Appearance 

 

Huawei B525 is the most recent desktop LTE gateway from Huawei, which is in littler size than E5186. With the measurement of 163 mm x 52 mm x 226 mm, there are control, Wi-Fi, flag quality, organize mode and LAN/WAN marker at the front board of the B525. At the back interface of the B525, there are 4 x RJ45 ports for WAN/LAN, 1 x RJ11 port, 1 x USB port and power connector plug. Furthermore, there are additionally two connectors for external antennas. Regarding the Huawei E5186, the dimension is 194 x 177 x 64 mm, and there are control, arrange mode, WiFi, voice and flag pointers on the front board. Two SMA connectors for external antenna, 4 x RJ45 ports for WAN/LAN, 2 x RJ11 ports for VoLTE and phone, 1 x USB port for capacity and power connector plug are located in a line.

From the appearance, we could get little contrast from the B525 and E5186, one is with 1 RJ45 port, and the other is with 2 RJ45 port. If you prefer black color, Huawei B525 has black color available. Huawei E5186 has only white color available.

 

From the appearance, we can’t see what the real difference is. To be perfectly honest, for single client who needs to purchase Huawei LTE CPE, they both could do well. One could fully replace the other.

Technical Features

 

The band bolt is supported by Huawei B525, which can’t discover in LTE CPE E5186. That implies you could run the B525 to a particular frequency bands from the setup menu of web UI. This is a helpful element when the administrator wants to select preferred network frequency to surf internet. Huawei B525 supports L2TP VPN setting. At the point when L2TP VPN is enabled, the throughput execution will back off, the maximum speed can up to 50Mbps (subject to network environment). On this point, Huawei E5186 doesn’t have such feature.

 

 

For all Huawei LTE CPEs, there are diverse sub-variant models for various network frequency bands and carriers. For Huawei E5186, there are two adaptations accessible: E5186s-61a (Band 3/7/28/40) and E5186S-22a (Band 1/3/7/8/20/38).  The new model Huawei B525, provides the most well known sub-models B525s-23a (Band 1/3/7/8/20/32/38), in addition to Huawei B525s-65a (Band 1/3/5/7/8/19/20/26/28/38/40/41 FDD1700/1400mhz) and Huawei B525s-95a (supported LTE bands unknown now). From the sub variants, we can see that the B525 seems more powerful on the LTE bands support than that of E5186, which means Huawei B525 could be used more widely with more network providers.

 

Conclusion 

 

From the appearance and technical features, we can there are some difference between the Huawei E5186 and B525. However, for most users, the different features may not influence the usage of the Huawei LTE router. And even Huawei B525 is newer model with new features, the Huawei B525 price is not as good as Huawei E5186, which is also an important factor for users to consider. But if you need to purchase band 32 CPE, Huawei B525 is the right model. In summary, huawei B525 is newer with more feature and powerful, but with higher price. Huawei E5186 has decent functions for common use, if you don’t have specific requirements, the lower price may be attracting.

ZTE MF980 4G LTE Category 9 Hotspot Review

The ZTE MF980 Hotspot is a 4G mobile hotspot that offers LTE Category 9 carrier aggregation technology. This 3-band technology achieves a download speed of 450 Mbps and upload speed to 50 Mbps. The supported FDD-LTE frequency bands are:  B1 / B3 / B5 (26) / B7 / B8 / B20 / B28 / B32

For Europe area, the bands in 4G are mainly B3, B7, B20 but also some carriers support the B28(700 MHz). In addition, the ZTE MF980 Mobile Hotspot also support below LTE/UMTS/GSM frequency bands:
* TDD-LTE: B40 (or B38 or B41 gold)
* UMTS: B1 / B2 / B5 / B8
* GSM: 850/900/1800/1900MHz

 

So the ZTE MF980 MiFi 4G could cover fairly wide areas, and it’s good to take as a wireless partner when traveling. We do not have precisely the supported aggregates of bands in 3 CA, we look for the info, but with the bands supported, we remain optimistic for a support in France (B20 + B7 + B3 or B28 + B7 + B20).

Wireless Specifications

The ZTE MF980 4G hotspot also offers Wi-Fi to the 802.11 ac standard operating in simultaneous dual band 2.4 GHz and 5 GHz. Up to 32 simultaneous users can connect for internet access. And it is of course compatible with 802.11b/g/n and offers a 2 × 2 MIMO technology. Equipped with a 2200 mAh battery, it is given for a battery life of 10 hours by the manufacturer.

The 1.44-inch TFT color display allows you to view the usual information, such as operator, signal strength, connection type and level, battery level, number of users connected, and data consumption. The small size of the ZTE MF980 fits easily in the pocket or in a bag.

There are 2 connectors for external antennas in MF980 MiFi. It also has a micro-USB port, a slot for micro-SIM and a cover on the 2 antenna connectors (TS-9 type). If you want to buy the external lte antenna for ZTE MF980, we recommend the tested model: http://www.4gltemall.com/4g-antenna-two-ts-9-connector.html

 

The setup of ZTE MF980 could be done through the web interface, or the Android application (or IOS) ZTELink APP. From the APP, user can do the settings for the mobile 4g router and can see the information about consumed data and battery status clearly.

 

In the market, ZTE MF980 is the first LTE cat.9 mobile hotspot. And we know another model Netgear Aircard 800s which also support LTE category 9. We would take further test between the two LTE cat9 mobile hotspots.

 

Below are the highlights of ZTE MF980 Technical specifications:

* Sleek Design
* 1.44 TFT Display
* Support 3CA High Speed
* Support FDD-LTE network: B1 / B3 / B5 (26) / B7 / B8 / B20 / B28 / B32
* Support TDD-LTE network: B40 (or B38 or B41 gold)
* UMTS: B1 / B5 / B8 / B2
* GSM: 850/900/1800/1900MHz
* Wi-Fi b/g/n/ac
* Wi-Fi 2 × 2 MIMO
* 2.4GHz & 5GHz
* Support 32 devices at the same time
* LTE-FDD Data Rate: DL 450Mbps/ UL 50Mbps (Category9)
* LTE-TDD: DL 330Mbps / UL 11 Mbps
* Dimensions: 122 * 65 * 10.6mm
* Battery: 2200mAh
* Other features
– 1 x Micro USB port
– 1 x Func Button,
– 1 x Power Switch,
– 1 x Reset Hole; SIM socket, Micro USIM
– 2 x External Antenna slot (TS-9 connector)