Around the end of 2016, Huawei offers the world’s first commercial LTE router B5328 with 4 × 4 MIMO antenna technology. The B5328 LTE Router offers significantly higher data rates in a correspondingly equipped network than devices with 2 × 2 MIMO antenna technology. The Huawei B5328 is the successor to the popular Huawei E5186 LTE Router. In the free trade, the Huawei B5328 is currently not available; however, interested network operators and service providers can order the device on request and thus make available to their customers.
Based on the GCT’s GDM7243Q, the only LTE-A chip commercially available that offers 4×4 MIMO capability, enables Huawei B5328 LTE CPE with higher data rates and throughput while using limited bandwidth (“double speed” with the same limited bandwidth), which is a scarce commodity for network operators.
By integrating the receiver with four antennas and equipping the base station with four transmitters, mobile operators can maximize the use of their spectrum. Huawei B5328 is the successor to Huawei E5186 4G LTE Router. With GDM7243Q chipset, Huawei B5328 cpedelivers LTE Category 5/6/7 throughputs with double speeds enabled by 4X4 MIMO technology, and supports Voice over LTE (VoLTE) and eMBMS (LTE broadcast) as well as other advanced features.
The Huawei B5328 was already introduced in December 2015, but so far only supplied to very few operators, as most LTE networks currently set to 2 × 2 MIMO antenna technology and the B5328 router has no appreciable advantage in such networks to the predecessor model Huawei E5186 Router. You can buy the B5328 for example in Tunisia with the provider mobilis.
Some European network operators have already carried out tests with the Huawei B5328, for example the Czech Vodafone. Vodafone has achieved test with 4 × 4 MIMO antenna technology and Carrier Aggregation around 300 Mbit/s in the downlink.
The Huawei B5328 has no telephone function in the currently available version B5328-155 and has only a single RJ45 Ethernet connection on the back. The WLAN module works only on 2.4 GHz (WiFi 802.11 b/g/n), the exact speed I could not find unfortunately. Basically, the B5328 appears not to be a high-end router in the face of quite meager facilities, while the previous Huawei E5186 LTE CPE had a much greater variety of functions (Wi-Fi 802.11ac and 4x Gigabit Ethernet).
The Huawei B5328 LTE router will also come to the market in Germany, Austria or Switzerland. As we know, the China Mobile will also use this device for the upgraded LTE-Advanced TD-LTE network. From today’s point of view, there is not much to be in favor, as network operators rely on 2 × 2 MIMO antenna technology, higher modulation (256QAM) and frequency bundling to increase the speeds in their LTE networks. Currently, the Huawei E5186 is still dominating the market for 2 X 2 MIMO LTE networks.
At the IFA 2016, the Californian network specialist Netgear showed a new LTE modem – the LB1111 for the home use. The device has been available since September 2016 in two different versions(model LB1110 and LB1111). The user has a more economical choice without PoE or a more expensive version with PoE. The Netgear LB1111 modem can establish a connection up to LTE Category 4.
Power over Ethernet, or PoE for short, is the magic word that counteracts the cable dialect. The technology makes it possible to transfer power via a LAN connection in addition to the network signal. This allows the LB1111 to be operated without a connection to a commercial outlet. If you want, you can optionally access the included power supply. The 4G network is connected by means of a micro- SIM card and can provide bandwidths up to LTE Category 4. There is also an appropriate tariff required – up to 150 Mbit/s downstream and up to 50 Mbit/s in upload implemented. In addition, all essential in Europe are frequencies (800 MHz, 1,800 MHz and 2,600 MHz) supplied. If no LTE connection is available, the modem can also access 3G (HSPA+) with up to 42Mbps. In an emergency, GPRS is used. If the signal is bad at certain location, the two connectors for external antenna are available to improve the signal.
Suitable for networking a server farm
Netgear itself underlines the business factor of the LB1111 and lists the model as suitable for the networking of server racks. Even in an office or for demonstration purposes, the device is well suited. As compatible operating systems, the manufacturer lists Windows 7, 8, 8.1, 10, Vista and XP as well as Mac OS from version 10.6.8. Furthermore, the Netgear LB1111 modem can be connected to a router or a switch, if required. This allows the LTE connection to be routed wirelessly to mobile devices such as smartphones and tablets. Practical: The Netgear LB1111 informs via an incoming SMS about an available update.
Further features of Netgear LB1111
The LTE signal quality is visualized by a five-digit LED. To highlight the reception, the luminaries were made in different sizes. An active current supply and a LAN connection are also signaled by means of an LED. The only physical control element is a reset button. A network cable, a user manual and a power supply are included with the modem. If you like the Netgear LB1111 LTE Modem, welcome to buy it from www.4gltemall.com.
Looking at the current available 4G LTE Mobile Hotspot, Netgear seems lead the LTE Advanced terminals. If you had known Huawei E5786 mobile WiFi, you may think this is the fastest 4G pocket router. However, if you know the two 4G mobile routers which we would introduce today, you may have a new view for the mobile terminals.
Since LTE Cat3 and Cat4 are becoming the mainstream for carriers, LTE-advanced would of course be available in near future. Here we can see some carriers are stepping fast. The carrier AT&T in USA and Telstra in Australia had presented the LTE Advanced networks for commercial use. The aforementioned Huawei E5786 is a LTE cat6 mobile router, which is already available for many network providers. AT&T and Telstra already used the LTE Cat9 and Cat11 terminals, which mean the LTE Cat9 and Cat11 technologies are available for the two carriers.
AT&T introduced Netgear Aircard 815s and had a new name “AT&T Unite Explore” while Telstra introduced Netgear Aircard 810s and has a new name of “Telstra WiFi 4GX Advanced III”. The two 4G mobile hotspots very similar in the name but feature differently. Today, we will have what’s the difference between them.
Aircard 810s vs 815S Appearance
The Netgear Aircard 810s follows the design of the predecessor Aircard 790s, which is a same level mobile router to Huawei E5786 supporting LTE Cat6. The body of Aircard 810s is made of plastic but feels good. With a 2.4 inch LCD screen, user can read the connection status and setup the routers on the screen.
The Netgear Aircard 815s also has a 2.4inch QVGA capacitive touchscreen like Aircard 810s. So the screen has same functions to Netgear AC810S for settings. There special feature of Aircard 815s which should mention is the rugged design that is dustproof, shock and water-resistant. This feature allows users to take the Aircard 815s not only for common outdoor activities, but also in severse weather, especially for the wilderness exploration. They both have two connectors for external antenna and socket type is TS-9. Between the two connectors, there is a USB 3.0 port.
Netgear AC810S VS AC815S Technical Specifications
Below the blank shows the details specifications of the two routers:
Actually, we had not tested the two units at same network environment in practice. But we will do that respectively in near future and will provide full test report for the two mobile hotspots. We hope the report would be a good reference for the potential users who need the 4G mobile routers.
There is one function that we have to mention: The Aircard 815s and 810s can both work like a mobile power bank, which is called Battery Boost, they can charge other electronics such as smartphones and tablets. This function is practical and useful in most cases.
From the appearance and specifications, we can see the two mobile routers (Aircard 815s and 810s) are with the latest technology and dominate the wireless terminals. Netgear Aircard 810s supports higher level network technology and it should be the fastest 4G mobile router. Of course, the price is also not cheap for the Aircard 810s, so as Aircard 815s. But if you would like a budget mobile pocket 4G router, the Netgear Aircard 790smay be a good option for you.
With the Netgear AC785S 4G mobile LTE hotspot, you can connect up to 15 devices with the LTE network via Wi-Fi everywhere. The configuration has been kept as simple as possible and a color display is always showing the current status of the network, the data consumed etc.
Dimensions: 109.9 mm (L) x 68.9 mm (W) x 14.6 mm (H)
Weight: 127 g
Operation
The Netgear aircard 785s is very simple. You just need remove the battery cover behind and inserted the SIM card under the battery. Subsequently, the Aircard 785s mobile router is turned on and after a short boot process; the most important details are showed already on the color display. Here we find information about the battery level, network signal strength, the used data and also the Wireless Passkey, allowing us to connect our devices to the Netgear hotspot.
Once connected to the WiFi, users can log in the admin setting page through browsers. The AC785 can provide a guest network on request, so that any stranger did not have to be directly connected to the private network. The little device provides dual-band Wi-Fi for a maximum range and sends thus on 2.4 and 5 GHz.
I would naturally also insert a few screenshots, where you can see the nice interface. But if you want to do some settings, an administrator password is necessary. (Password). Once logged onto the network of AirCard, enter the admin, password and you will have the settings are listed pretty.
Apart the settings of the mobile hotspot from the browser, some basic settings can also be made easily via the mobile phone using the NETGEAR AirCard app.
If you have a docking station for the aircard 785s, the aircard 785s could have LAN ports and antenna port, where user can connect an external MIMO antenna. On the hotspot located behind two flaps for the connections for the external antenna and the microUSB connector for use on the docking station.
The battery of Aircard 785s could work for 10 hours on a single charge according to the manufacturer. I personally don’t think the battery is enough in most cases, there are many 4G mobile hotspots from other vendors with large battery capacity, which can also charge other devices. The Huawei E5770, Huawei E5771 and ZTE MF903 are the typical models with large power so that they can work like a mobile power bank.
Conclusion
In summary, we have to say that the Netgear Aircard 785s is not one of the cheapest, but it comes with some special features. Firstly LTE is supported on Cat4 with peak download speed to 150mbps. Secondly, multiple devices could connect to it for internet access. And the features of aircard 785s could meet all our requirements from the mobile router. The pity is the decent battery of netgear 785s.
Actually, there are many more new 4G mobile hotspots from Netgear, such as Aircard 810s (LTE Cat12, 600mbps) and Aircard 790s (LTE Cat6, 300Mbps). If you like them, welcome to check on www.4gltemall.com.
Every month, there are new models of 4G mobile routers available on the market. It is an interesting proposition especially in summer when we choose to have a vacation in different places. The mobile hotspot may not be necessary where there is access to a WiFi network. Everyone has a smartphone or tablet today and would like to use it even during the summer tour. However, if you want to save power for the phone, a 4G mobile router may be necessary. The router supports 4G LTE will provide quick internet access for several mobile devices. Such a device is TP-LINK M7350, which will tell you today.
The TP-Link M7350 router looks elegant. A small, rectangular design can be mistaken with a smartphone from a distance. Especially, the M7350 router is black. On the upper surface mounted display – it is not large, only 1.4 inch, but it is sufficient to provide information on the calls, battery status, and of course the menu. Under the display power button, it is shaped in such a way that it was easy to find it without looking at the router. On the top edge placed the start button menu, while the bottom has a microUSB port, by which the device can be charged.
TP-LINK M7350
As I mentioned, TP-Link M7350 router supports 4G LTE, and it have a memory card slot. Since it is a portable device, it’s also equipped with a battery. We will find them under the bottom cover. Unfortunately, the design is not very good, which will easily remove the cover. You have to gently pry and then we choose the battery, SIM card slot, and microSD card slot. The battery has a capacity of 2,550 mAh and can therefore provide a long service life for the router.
TP-link M7350 is lightweight and small size, which allows put it into the pocket without problems (unless you walk in tight jeans). The body material is made of good quality. I would prefer, however, the memory card slot was drawn out. If we want to change the memory card, we must remove the battery and disconnect the network. If a socket placed on the side, we could do it without interrupting operation. Of course, this is only useful if you frequently change (or want to change) memory card.
TP-LINK M7350
Check below the TP-Link M7350 Mobile Hotspot Features:
1 micro USB port to charge the device battery
slot for a SIM card
slot for Micro SD card
Buttons
Switch
Menu Button
Antenna
Inside
Transmission speed
Getting up to 150Mbit/s
send up to 50Mbit/s
Power
Built-in rechargeable battery 2550mAh
Dimensions (W x D x H)
106 × 66 × 16mm (4.2 × 2.6 × 0.6 inches)
Micro SD card reader
up to 32 GB
Display
Statistics data, the state of Wi-Fi network, number of users, the type of network (2G / 3G / 4G), signal strength, access to the Internet, the battery meter.
Hiding the SSID, MAC address filtering, encryption, WPA-PSK / WPA2-PSK
DHCP
DHCP server, DHCP client list
OTHER
Certifications
CE, RoHS
Contents of the package
Portable hotspot M7350, LTE-Advanced
Micro USB cable
adapter Micro SIM> Standard SIM
Adapter Nano SIM> SIM Standard
Power
Installation
System requirements
Windows 8/7 / Vista / XP, Mac OS, Android, iOS, Windows Phone
As you can see, the M7350 router does not support the latest standard 802.11ac, but allows you to work in the 2.4GHz or 5GHz network. It is very important that the first frequency is very popular, and in addition has a small number of channels, which can sometimes cause problems with coverage, interference, etc.. Of course, the main advantage is its support for 4G LTE networks and it could supports almost all the LTE networks in Europe and most carriers in Aisa. And up to 15 wireless devices could connect to TP-Link M7350 mobile 4G router.
TP-LINK M7350
And the higher speed transmission on 4G LTE network is also attractive. Based on LTE Cat5, TP-Link M7350 can achieve download speed to 150mbps and upload speed to 50Mbps. And 3G DC-HSPA+ and 2G GSM networks are backward compatible. If the 4G LTE network is not available, the router would automatically switch to 3G or 2G network. But before turning to the use and performance, one more feature should be remarked. I mentioned earlier that the router does not support the 802.11 ac. Why we are concerning on this feature, you should look at a table below:
Standard
Transmission speed
802.11 n
Getting to 150 Mbit/s
802.11 ac
Downloading up to 500 Mbit/s
4G LTE
Downloading up to 100 Mbit/s
Source: Wikipedia
As you can see “n” is enough to cover the demand on the transmission, and 4G technology is available at high speed. Of course you can argue that this is the theoretical speed, in extreme cases 4G may be faster than the WiFi. We still think the “AC” feature is very important for future.
Starting the TP-link M7350 router is very simple. After placing the SIM card in the device, simply press the power button. After a few seconds, the system will work, some may take longer to log on to the GSM network. WiFi connection is very simple – just select the appropriate option in the menu and all the information needed – SSID and security key to connect to the network, which will be displayed on the screen. Then you only need a browser, enter the corresponding IP address, enter your login and password (the default is admin / admin) and can do all the settings for the router.
Interface prepared by the manufacturer is very simple. In the upper part, there is a bar, which is equipped with icons that quickly inform us about the state of the battery, received SMS, connected devices, etc. Following are the main menu consists of four positions: Wizard, Status, SMS and Advanced. With their help, we can run the setup wizard, check the status of calls and statistics, see SMS and … ultimately configure the router. When selected, on the left it will display a new menu, which allows you to set network security, DHCP, restore factory settings, etc.
Tests conducted using a SIM card with the Vodafone network. The wireless connection listed the notebook Dell Vostro. Below I present the results of measurements, but notes that the result may be different from other places. The link speed depends on the level of the network in place in which to combine. And the distance between users and the M7350 Router, the speed also varies. The farther you move away from the router, the transmission speed will be lower. Throughput tested by sending files with 1GB and 4GB. The achieved results presented in high speed on LTE network.
As you can see, the results achieved are not bad. Compared to stationary routers that have external antennas offering improved efficiency in promoting and receiving radio waves, TP-link M7350 mobile router performed not quite bad, especially in the short run, and it performs better than 4G USB modems with whom I had so far to deal with.
When testing the performance, we connect the M7350 router with mentioned the notebook, two Samsung smartphones (Galaxy S6 and Galaxy S5) and two Huawei new smartphones (Huawei Nova and Honor V8) through WiFi. For all devices I browsed the Internet, download files, and I played video on YouTube. I did not notice any special delays. The tests I conducted both in the open areas and in the rooms. In any case, I had a stable connection.
At the end, we note just the battery. As I have written before the battery has a capacity of 2550 mAh, which is quite a few. Since 4G is faster standard, users have great demand for a larger battery. Many other TP-Link’s competitors in China had presents the new 4G pocket WiFi with very power capacity, the new pocket WiFi can even charge other electronics, which is very very attractive and useful feature. The typical models include Huawei E5770 Mobile WiFi Pro, Huawei E5771 MiFi Plus and ZTE MF903 Mobile Router etc..
Summary
TP-LINK M7350 is a good 4G mobile router, which it is worth to obtain. It is true that it is not cheap, but will provide fast transmission speed as the manufacturer promised. Simple connection to the network, a simple menu, simple and fast interface, all this translates into a simple operation. It could be a good partner for business trip or outdoor activities!
Mobile routers are now very fashionable. It is true that we can connect to the network using smartphones and tablets, however, there are still many users who having computers would like to use mobile routers to connect to the Internet. Since many users expect more from the mobile routers, the manufacturers of mobile routers supplied new models with new functions. Huawei E5377 4G hotspot is one of them.
The Huawei E5377 router is a real pocket router. The manufacturer has equipped it a LED display, and next to LED display on the right side is a big switch. The top edge of the body is the menu button, while at the bottom microUSB slot and two antenna connectors covered flap are placed. Remove the rear cover, plug in a valid SIM card and insert the battery. Then we can get connected with internet.
The Huawei E5377 hotspot is very light and fits comfortably in your hand. The body has a special groove that facilitates its opening. The whole is well matched; there are no gaps, no creaks. The white color looks elegant, but I have a feeling that quickly loses its charm after a few trips in your pocket. Unfortunately, the white body gets dirty easily turning to gray. Especially since the material used is rough, making it easier to absorb dust and pollen. I personally like the black color, which is also recommended by Huawei.
As can be seen, Huawei E5377 router can handle both 3G and LTE. The difference between these technologies laid primarily in the transfer data rates. In the case of LTE, the speed can be several times higher than in the 3G (LTE, currently can achieve up to 55 ~ 85Mbps), the theoretical standard specification provides for even more than double the download speed to 150Mbps. The E5377 router can install a memory card of up to 32GB. This way we can use it, for example. As a memory stick, the contents of which we can share with other users. And maximum of 10 users could get connected with the E5377 hotspot through WiFi. The equipped battery in E5377 already wrote. The manufacturer says that it is sufficient for 6 hours operation. Reading the rest of the text, you will find out how the E5377 performs.
Let’s see the user interface. The Huawei E5377 router can be setup in two ways: through the menu and the power buttons on the wireless router, or through the Web browser. The latter method (or browser) is definitely easier to use while offering more options, which is recommended. Just run the router, enter the password for the network (the default SSID is HUAWEI-E5377-XXX) that are on the label under the battery, enter the address into your browser: 192.168.8.1 … and that’s it. You can also download the Huawei Mobile WiFi APP for Android or iOS to setup the Huawei E5377 Router.
The interface is very easy to use, although I admit that it could work a little faster. Some pages refresh slowly, but enough to do common settings. The application is very simple, and consists of a main menu in the upper part of the window, pop-up menu on the left and the main window where you set the individual parameters. The launch window is equipped with three large buttons, which can enable or disable the router, stop cellular data transmission, and enable/disable WiFi. At any time by selecting Statistics, you can check the amount of data sent and received, check out who is connected to the network, etc. Prepared menu also allows you to send and read SMS messages.
The most important item on the menu are the Settings. This is where you configure network access, sharing WiFi, Ethernet settings (one can use the USB – LAN), etc.. The manufacturer has not forgotten the safety at different levels, we can verify your MAC Address, IP, etc. There are of course several custom functions such as the ability to prioritize users, the ability to define a virtual server. We also have a NAT, UPnP, DMZ … if you think this is not enough, but we need not everything if we use the router as a temporary Internet source during a weekend trip out of town. Actually, I would like to recommend use the main stationary router access to the network at home rather huawei E5377.
The already mentioned Menu and Power buttons also enable us to navigate through it – to select various options and approve them. Using this software, we can switch the operation of the device mode 2.4GHz to 5 GHz. We can also check the settings of the wireless network, such as its SSID, password and IP address of the router, you can start the WPS function and set E5377 to the operation extender whether to enable or disable data roaming. We also have the ability to reset the router. What interesting is the ability to display 2D code (QR Code), with which we can quickly enter the security code network, or run applications that allows device management from a smartphone equipped with Android system. The menu is simple, fast, and easy to understand and do settings.
Summary
Huawei E5377 looks elegant, fits in your pocket, and is easy to use. Here now there are many new successors available with better technologies such as Huawei E5786 or Huawei E5787. If you don’t have high demand for the pocket WiFi, huawei E5377 is recommend as a budget mobile partner!
Some years after the launch of LTE, there is already a wide range of mobile LTE routers with integrated battery. Especially the Chinese manufacturer Huawei, who is clearly the market leader in this segment, offered many models. But not every user requires the best and most expensive equipment, therefore the Huawei E5377 is now a very compact, lightweight mobile LTE hotspot available, which is still very good technical equipment.
Smaller and lighter 4G hotspot
Weighing approximately 80 grams, the Huawei E5377 is very light and is very good in the hand or transported in a pocket. With long time use, it becomes quite warm, but the operating temperature is always at an appropriate level.
On the front of the Huawei E5377, between the Huawei logo and the power button, there is a square display, where a variety of information such as reception, network technology, the spent data volume are shown clearly. The display is not permanently lit to save energy, it only turns on when you press the power button or a wireless device is connected. Furthermore, you can find a menu button on the top edge, with which you can make a few settings in combination with the power button. Thus, for example the ability to display a QR code through which smartphones or tablets enter into the App Store by scanning the code. There Huawei HiLink app can be downloaded. With this app, further adjustments can be done to the E5377, such as change the wireless network name or password.
Special feature: wireless repeater
In addition to the controller via the Huawei HiLink app, an access to the Huawei E5377 via any browser is possible. The default IP is 192.168.8.1. The web interface responds quickly and provides the most important settings. A special feature is the wireless repeater function, with which you will be able to log the Huawei E5377 into an existing wireless network and this order can be used as an Internet access. The advantage of this solution is, for example, that you can save data volume in mobile network as soon as you use the repeater.
Fast LTE to 150 Mbit/s
The integrated modem in Huawei E5377 supports the three wireless standards GSM (2G), UMTS (3G) and LTE (4G). Depending on the wireless technology, different speeds are possible. So LTE category 4 up to 150 Mbit/s downstream and 50 Mbit/s upload speeds are possible. In the UMTS network, speeds are up to 42.2 Mbit/s accessible via DC-HSPA+. Good to know: The Huawei E5377 router is compatible with all major European LTE frequency bands and supports quad-band GSM and dual-band UMTS in many countries for worldwide use.
The reception is good both in the LTE network and the UMTS network. Even in weak regions, you can often surf more easily with the E5377. You’d better put the E5377 router close to the window or even outdoors, because there the reception is usually best. By the way, there are two connections for external antennas; you can amplify the reception with an external LTE antenna, thus increasing its speed. The important thing is that the antenna cable has plugs type TS-9. These adapters are often called “pigtail” and are available in all good electronics stores.
WLAN at 2.4 and 5 GHz
A maximum of 10 devices can be connected with Huawei E5377 simultaneously via WLAN. Another device also can connect via USB. The wireless speed is up to 300 Mbit/s, on request, instead of the 2.4 GHz frequency band, WLAN in the region are running at 5 GHz. This is particularly appropriate when the 2.4 GHz band is overloaded or interference. The wireless frequency can be changed in the software of Huawei E5377. The WiFi range was very satisfactory in the test. The 2.4 GHz signal was still usable by two walls at a distance of about 8 meters. Unfortunately an external wireless LAN antenna cannot connect.
Up to 6 hours operating time with battery
The model battery of Huawei hotspot E5377 is easily replaceable by the user. It has a capacity of 1500 mAh and provides an operating time of about 6 hours. Unfortunately, no power adapter is included so that one is forced to connect the E5377 4G router to a USB port on the computer or on an existing USB power adapter. Compared to other devices, such as the Huawei E5786, the operating time is quite short – but it is possible to buy a second battery, thereby extending the duration.
Conclusion
The Huawei E5377 has consistently convinced with good performance in the test. The Internet connection is very fast, the receive and transmit performance is good and the WLAN transmits on request at 5 GHz. Also very pleasant are the compact size and very low weight. Only the battery could be considered a point of criticism, as compared to other mobile wireless hotspots with large battery such as Huawei E5770 and E5771. The Huawei E5377 is now available at www.4gltemall.com. The unlocked version could be used worldwide without any limit.
The Huawei E5787 is a new modern LTE-Advanced hotspot with a large touchscreen display. The download speeds of up to 300 Mbit/s can be achieved, in the upload up to 50 Mbit/s are possible. The battery is easily replaceable by the user and has a term of up to 12 hours working time. With fast WLAN AC, Huawei E5787 hotspot can supply up to 10 devices simultaneously with an internet connection via USB cable.
The Huawei E5787 Hotspot is manufactured by the Chinese manufacturer Huawei and it provides a currentLTE-Advanced CAT6 modem for up to 300 Mbit/s downstream and up to 50 Mbit/s upstream. It’s the second LTE cat6 mobile router from Huawei. The modem is manufactured by HiSilicon and also comes with the predecessor model Huawei E5786. Although the Netgear AirCard 810 is already a faster LTE hotspot, the Huawei E5787 is one of the fastest mobile LTE routers on the market.
Most other devices provide only up to 150 Mbit/s in download (LTE CAT4). Of course the E5787 4G hotspot is also backward compatible with older wireless technologies GSM and UMTS (3G and 2G). In the UMTS network, up to 42.2 Mbit/s download via DC-HSPA+ is possible with GSM Data Accelerator EDGE is supported. Regarding the supporting frequency bands, we suppose the version for Europe FDD-LTE networks would be first available, ie. Supporting LTE band 1/3/7/8/20(800/900/1800/2100/2600MHz).
Easy operation with touch screen
Unlike its Huawei E5 predecessors, Huawei upgraded the screen on the Huawei E5787 because it has a large touchscreen display. So it’s also called Huawei E5787 Mobile WiFi Touch. Thus, the hotspot can quickly and easily use, which you already know and experience it from your smartphones ago. The key features like data consumption, connection time and receive status are displayed directly on the home screen. More detailed information you get on the menu that is graphically appealing. This feature was already available on Netgear Aircard 790s and 810s for long time. On this point, Huawei follows Netgear’s steps, but it should be the mainstream for high-level gadgets now.
WLAN AC and Replaceable Battery
Compared to its predecessor Huawei E5786, Huawei E5787 has a removable battery. This has a capacity of 3000 mAh and will provide an operation time of approximately 12 hours. If there are many devices simultaneously connected, the capacity will probably be more likely to be slightly lower. The integrated WLAN radio module distributes the Internet connection of various devices such as laptops, smartphones and Tablets. On request, internet access via USB is possible and due MicroUSB cable is included and is also used to charge the battery. The wireless radios on both 2.4 GHz and 5 GHz, and supports the latest standard 802.11ac, so that the high-speed LTE also arrives at the terminals.
The Huawei E5787 is currently only available abroad, for example in Saudi Arabia. The online store www.4gltemall.com also provides the unlocked Huawei E5787 mobile WiFi touch for global shipping. If you can confirm the Huawei E5787 is compatible with your local LTE networks, you may get the new fashion mobile WiFi hotspot from www.4gltemall.com.
Now Huawei obviously focuses more on the development of mobile hotspot routers, as well as new LTE sticks. The small devices are a little larger than sticks, but far more diverse. So there are many products of mixture of router and stick. And now we get the E5573s, Huawei provides another device for mobile and stationary use. Find out what the Huawei E5573 offers.
The Huawei E5573s supports LTE Category 4 (CAT4), which is sufficient for most customers. The LTE module in Huawei E5573 could provide download rates up to 150 Mbps in LTE network. In addition, if the LTE network is not available, the operating via HSPA+, HSUPA, UMTS (3G) and Edge (2G) is possible. As a global model, the Huawei E5573 could support TDD-LTE/FDD-LTE/WCDMA/UMTS/GSM networks. Here we have the Huawei E5573s-320 supports 4G FDD-LTE Band 1/3/5/7/8/20 (800, 850, 900, 1800, 2100 and 2600 MHz). Actually, there are many variant models for Huawei E5573, below are the sub-models listed with the supports network frequency bands:
Huawei E5573s-320:
– FDD Band 1/3/5/7/8/20 (800/850/900/1800/2100/2600MHz)
– WCDMA Band 850/900/2100MHz
Huawei E5573s-856 (For China Unicom):
– TDD Band 40/41
– FDD Band 1/3
– WCDMA Band 1/8
Huawei E5573s-852 (For China Mobile):
– TDD LTE Band 38/39/40/41
– FDD LTE Band 3/7
– TD-SCDMA B34/39
Huawei E5573s-606:
– LTE-FDD 2600(7)/2100(1)/1800(B3)/700(B28)MHZ
– LTE-TDD Band 40 (2300MHz)
– DC-HSPA+/HSPA+/HSPA/UMTS 2100/900/850 MHz
Huawei E5573s-607:
– FDD Band 5 (850MHz) & TDD Band 40 (2300MHz)
Huawei E5573s-156(also MTS 8210FT):
– LTE-FDD 1800(3)/2600(B7)/800(B20)MHZ
– LTE-TDD Band 38 (2600MHz)
– DC-HSPA+/HSPA+/HSPA/UMTS 2100/900/850 MHz
Huawei E5573s-508:
– LTE-FDD 1700(4)/2600(B7)/700(B13)MHZ
From the above frequency bands, users can choose the appropriate one for their market per the carriers at their locations or countries. If you would take the E5573 MiFi for oversea travel or use in multiple countries, you would better to clarify the network frequency bands of the destination countries and find the correct variant model.
Wireless Features
The Huawei E5573 4G hotspot router allows the connection of up to 10 additional devices, such as smartphone, laptop, tablet or game console. It supports the 802.11a/b/g/n. The modern wireless ac is not integrated again, which we find quite a pity.
External antenna
Like other Huawei 4G mobile hotspots, the Huawei E5573 has two TS-9 jacks for connecting an external LTE antenna. Thus, if the E5573 is used in areas with difficult reception conditions, the signal can be improved by connecting a 4G antenna. Here we have one smart antenna for Huawei E5573 to recommend: http://www.4gltemall.com/4g-antenna-two-ts-9-connector.html
Battery
One important matter for a mobile router of course is still the battery. The Huawei E5573 has a capacity of 2300 mAh for about 6 hours of operation and 300 hours standby which is enough according to the manufacturer. In practice, you may found the battery is not really enough on intensive use. In this case, the similar model Huawei E5770 Mobile WiFi Pro or Huawei E5771 WiFi Plus may be better options because they have large power capacity for much longer working time.
Conclusion
Currently the Huawei E5573 is available on www.4gltemall.com. You can check the variants for different areas. And 4gltemall.com could ship the Huawei E5573 to anywhere of the world. It’s easy to get this pocket WiFi. Since the Huawei E5573 technically hardly differs from devices such as the Huawei E5577, it is still a good mobile WiFi Router.
At the Consumer Electronics Show (CES) in Las Vegas, Netgear introduced the new mobile hotspot AirCard 790 which differs of most competitor products on several features. Particularly striking is the color touch screen on the top of the unit. Given the opportunity, the aircard 790s mobile hotspot is stationary in a Netgear docking station. In addition, the Netgear aircard 790s dominated LTE Cat.6 and thus supports mobile data connections of up to 300 Mbit/s downstream and 50 Mbit/s upstream. This is far from all its competitors in the case.
The Netgear 790s mobile hotspot is 6.6 x 11 x 1.5 centimeters and weighs 136 grams. The device is therefore small and portable so that it can be easily transported in a pocket or purse. And the unit lies comfortably in the hand.
The advantage over many other mobile hotspots is also the possibility to replace the battery, and the body of Aircard 790 is thin. Under the battery is the SIM card slot, wherein Netgear sets here for the micro-SIM standard.
The aircard 790 router can be used as an external battery pack for a smartphone. A suitable connection cable is included as well as a charger for the AirCard 790. If you want to operate the device in other regions, but can also use any other power adapter with microUSB cable.
The mobile hotspot 790s can be used with SIM cards from any providers. The device supports WLAN at 2.4 and 5 GHz, wherein the second frequency band can be switched on optionally. Multiple SSIDs and guest accounts can be set up. Further, the configuration of the device is possible almost completely directly via the touchscreen. Administration is possible via smartphone apps that Netgear offers, or via the web interface, which can be reached through the Internet browser of a connected smartphone, tablet or computer, unnecessary in most cases.
On the display of 790S small router, a signal strength meter and the name of the cellular network that currently received network technology are displayed by default. There are also an icon that indicates whether the data connection is established, the name and password of the Wi-Fi hotspots as well as the current connected user, which can be configured via the menu. The remaining in the billing period days are shown.
About submenu, the user comes to incoming SMS messages. In addition, SMS can be created and also send text messages from the AirCard 790. Other topics let the user configuration. Among other things, the device can be used as a USB modem instead of Wi-Fi hotspots.
Direct comparison with smartphones and Huawei MiFi
In the test, the WLAN range was slightly higher than that of the Huawei E5786 used in parallel. Also, the LTE-800 reception was above average, as has been shown also in direct comparison with smartphones like the Apple iPhone SE and OnePlus. We put the Netgear aircard 790s router alternately with SIM cards from Telekom, Vodafone and O2. The respective provider is automatically detected, so that a manual configuration of Internet access was not necessary.
In the Telecom network in Frankfurt, we reached top speeds of 120 Mbit/s. In Berlin we came up with up to 80 Mbit/s and in Munchen, the performance was 20 to 30 Mbit/s downstream. These are the results that we have achieved with the Aircard 790s. Here the Netgear 790S router kept much longer in touch with the LTE or UMTS network as the counterpart of Huawei.
Battery lasts as Netgear promises
Netgear speaks officially of a battery life of eleven hours. This value we have not quite reached in the endurance test, in which a MacBook Air was permanently attached to the AirCard 790. A little more than ten hours held the battery in good LTE coverage in Telecom network but the mobile hotspot had to be connected to the charging cable.
For practical use, Netgear provide the possibility that the aircard 790 hotspot operation is automatically stopped to be determined at the user idle time in order to save battery capacity. In practice, the battery lasts for longer working days in each case.
What we did not like in the test: Similar to a Windows Phone, the Netgear AirCard 790 boots whenever that is connected to the charging cable. It is not necessarily said that the mobile hotspot is needed only because the battery is about to be supplied with fresh capacity, for example, when you come to a trade fair straight home and the next day with a fully charged battery would leave the house.
The Netgear AirCard 790 could largely satisfy the test. The device worked always reliably even in hours of use, the battery capacity is sufficient for one day and LTE Cat. 6 is exactly what is currently available in many mobile networks worldwide. Here now, the unlocked Netgear aircard 790s is available on www.4gltemall.com, you can also check other netgear aircards 4G here: http://www.4gltemall.com/4g-wireless-router/netgear-4g-lte-router.html .
