4G Technology Archives – Page 24 of 59

Huawei E5170 LTE Cube Test

The market appeared an interesting new modem / router Huawei E5170s-22. It is interesting in that it can be used on both fixed and mobile internet connections and in all 2G, 3G and 4G LTE networks. The Huawei E5170 Cube consists of two parts. The lower part of the docking connector for wired LAN. The upper part of the battery serves as a WiFi hotspot for up to 32 devices.

After unpacking Huawei E5170, we can see the simple shape with blue backlight which looks really nice. The front parts are LED indication to display 2G, 3G, 4G signal, wifi, battery charging, SMS messages. On the side of the main body and behind the upper part, there is its own power supply (for battery charging) and two CRC9 connectors for external antenna connection. The lower part of the docking connector includes RJ-45 (Ethernet port) to connect a LAN and power connector.

huawei-e5170-e5170s-22-lte-cube-2

Inserting the SIM card and then power on the LTE Cube E5170, it then starts working. Huawei E5170 is SIM unlocked for any operators, it is therefore possible to use any sim cards. (The battery cover has the password for wifi and battery reset button next to the entire router). After inserting the card (tested with Vodafone, T-Mobile), the Huawei E5170 connected very quickly to the network and be able to use the Internet for available networks. It was unnecessary to set anything (APN) or to download new software, as sometimes happens with other manufacturers.

huawei-e5170-e5170s-22-lte-cube-1

When you start, I had attached a small wideband external antenna with the E5170 Cube. (I’m in the area where no external antenna to get a LTE signal). Huawei E5170 automatically connects to the Vodafone LTE network although the signal is weaker than a 2G network. After disconnecting the external antenna, the cube switches to unusable 2G networks. Just to test the SIM card from another operator, I put the T-Mobile card and to my surprise, E5170 modem with external antenna connected to LTE network from T-Mobile.

huawei-e5170-e5170s-22-lte-cube-5

To setup the Huawei E5170, user can access the interface by entering http://192.168.1.1 and entering the username (admin) and the password is the same (also admin). You can do the personal settings for the network such as wifi network.

huawei-e5170-e5170s-22-lte-cube-7

In conclusion, we can say that Huawei E5170 very elegant (compact) resolved a combination of fixed and mobile 4G router. You can simply take the upper part (hotspot) on you trips and use over WiFi for up to 32 devices. Huawei E5170 performs better than my favorite set of ZTE 4G USB modem + router. And the LAN option and built-in antenna for mobile use, the LTE Cube E5170 provide the most possibility for users to connect with network conveniently. It’s recommend in our opinion!

huawei-e5170-e5170s-22-lte-cube-3

NetGear Presents hotspot 4G AirCard 810 (AC810S)

NetGear AC810: a new hotspot for future

The Netgear AC810 is a new 4G hotspot router that works with the SIM card of a mobile operator in micro-SIM format. Compatible Class 11 for 4G LTE, it achieves data rates up to 600 Mbps. We also note the presence of a Dual Band mode (2.4GHz and 5GHz) to get better rates. We also note that it is compatible with networks 4G LTE and 3G in Europe, the Middle East, Africa and Asia, as well as 3G networks worldwide. That’s great to take the aircard 810s when traveling.

The body of netgear 810s is really small and can therefore be taken easily in a bag or even a pocket.

Netgear aircard 810s front

Accessories included with the AC810S

The Aircard 810s obviously have a removable battery for obtaining a range of up to 11 hours in use and 250 hours standby. A USB3.0 cable enables charging on USB and a USB Power Adapter is provided. A cable for the Jump Boost Technology recharges other smartphones based on the battery from the AC810.

netgear aircard 810 package content

Multiple connections

The Netgear AC810S can connect through the simple creation of a Wi-Fi 802.11 ac standard. By default, it already has a network name and a password, which are indicated under the battery but you can easily change these settings through the onboard menu.

Automatic management of the SIM card

If you insert a SIM card that also includes calls, SMS and MMS and not just the data as in our tests, you can view the SMS directly on the AC810 via the Messages menu. Here we have used a SIM card from France network carrier Bouygues Telecom. We must then enter the PIN code of the SIM card so that the hotspot automatically retrieves the operator settings.

Netgear Aircard 810s sim slot

A touch screen for the Netgear AC810s

The screen quality is good but do not expect to the retina. Here the touch screen is simple but effective; it navigates in the menus like on a smartphone. The buttons and back home are also tactile. This is a 2.4-inch LCD colors. This screen also allows checking the quality of connection, the connection type, the data consumed and the number of days remaining for this contract. It’s very useful for users.

Netgear Aircard 810s Antenna connectors

We tested the hotspot with an iPhone, an iPad and a MacBook Pro connected simultaneously and did not encounter any problems. Indeed, the Aircard AC810 is able to accommodate up to 11 devices simultaneously.

AC 810 Hotspot Features

We note that the menu offers access to operators and settings that can enable WiFi 5GHz mode, allowing for better transfer rates essentially with the 4G high speed. Of course, your equipment must be compatible with the Wi-Fi standard in order to make the best. This is actually the wireless N.

Here are the full specifications for Netgear Aircard 810s for reference:

Network technology

4G LTE, Class 11 with triple-band carrier aggregation
DC-HSPA+, HSPA+, HSPA
4G LTE
3G

Network bands supported

4G LTE FDD 800/900/1800/2100/2600 MHz
4G LTE TDD 2300/2600 MHz
3G 850/900/1900/2100 MHz

Wireless

11ac/b/g/n
Wifi Dual Band 2.4 or 5 GHz

Required configuration

11ac WiFi-enabled device/b/g/n 2.4 or 5 GHz
Windows 10, 8, 8.1 and 7 (32/64 bit), Windows RT, Windows Vista (SP2, 32/64 bit), XP (SP3, Media Center Edition 32/64 bit) or Mac OS X 7.0 or later

Physical characteristics

Dimensions: 112 x 69 x 15.5 mm
Weight: 132 g
SIM card type: Micro SIM (3FF)
Independent activity: until 11 am
Standby time: up to 260 hours
Display: touch screen 2.4 “

Package contents

mobile hotspot AirCard 810 (AC810)
removable lithium-ion battery (2930 mAh)
Cable for Jump Boost
wall Charger
USB cable with Micro USB Connector
Quick Start Guide

We will propose soon a test for mobile use with flow measurements in several situations. Check more Netgear Aircard 4G hotspots here: http://www.4gltemall.com/4g-wireless-router/netgear-4g-lte-router.html

TP-LINK M7650 LTE Cat11 Mobile WiFi Hotspot

Internet is now very important for our daily life. So there is a great demand of gadgets for wireless connection from users. The alternative of using a mobile phone as a WiFi access point or modem is not always comfortable, and when running this function, the mobile phone may consume much battery that cannot always afford. TP-LINK gives us another option for wireless connection: TP-LINK M7650 4G LTE WiFi Router.

This TP-LINK M7650 is a new mobile pocket WiFi router upgrading from its predecessor TP-Link M7350 and is compatible with the standard LTE CAT11, which allows speeds up to 600 Mbps. It’s the most attractive feature on M7650 MiFi which also uses the protocol WiFi AC to work with the bandwidth of 5 GHz, less congested and more stable. The TP-link M7650 is compact to carry smoothly in your backpack or briefcase and with a battery of 3,000 mAh to use throughout an entire working day.

The TP-LINK M7650 is very interesting for professionals who regularly work with your laptop outside the office, and it’s a great partner for travel. This portable WiFi router can insert a SIM data card and start connecting with the Internet in just seconds. This versatility is very useful as an alternative to using our own smartphone as a WiFi access point. The TP-LINK M7650 is based on Qualcomm chipset and compatible with the network 4G CAT11, with maximum speeds of up to 600 Mbps. So multiple devices could connect to TP-Link M7650 and surf in high speed. The maximum supported user could reach to 32 terminals.

This means that the M7650 Mobile WiFi is ready for the future, because currently the main operators could only provide top speeds of 300 Mbps. In addition, another advantage of TP-LINK M7650 is compatible with the network protocol WiFi AC. This protocol works simultaneously on both the bandwidth of 2.4 GHz and 5 GHz. This first width of 2.4 GHz is used by the vast majority of devices. However, the main problem is that it is very congested. This causes interference and loss of signal quality. Meanwhile, the bandwidth of 5 GHz is faster and more stable. The maximum speeds supported by the TP-LINK M7650 are 300 Mbps bandwidth in the 2.4 GHz and 867 Mbps in the 5 GHz.

tp-link-m7650-2

Today, most launched mid- range and high-end devices, including smartphones and tablets and laptops, already incorporate support WiFi AC. The TP-LINK M7650 uses a compact design to smoothly take in trips and journeys. Within the design of the TP-LINK M7650, we must highlight the small screen from which we can view key data as the connection speed at which we are transmitting data, consumed data, the number of connected devices or the status of the battery.

tp-link-m7650-3

Speaking of battery, this model integrates with a capacity of 3,000 mAh that helps us work throughout the whole day without having to worry about power-off. And there is an option to expand the internal space to save files directly to the access point through a MicroSD memory card up to 32 GB. Users connected with the M7650 could share the files freely.

Here now, we only know the Netgear Aircard 810s has similar specifications to TP-Link M7650 mobile WiFi hotspot. And the aircard 810s is already available for Australia network provider Telstra. TP-link M7650 would be available for Spain carrier. We would update the news on www.4gltemall.com once it’s available here.

ZTE MF286 4G LTE Cat6 Wireless Router Review

With the development of LTE network technology, more and more network providers are trying to upgrade the network to LTE advanced with carrier aggregation. Then more and more users are demanding for LTE Cat6 equipments so as to achieve possible fast downlink and uplink speed. Finally, ZTE presents its first LTE category 6 wireless router since Huawei had its LTE cat6 router E5186 and E5175 on sale for long time.

ZTE MF286

Built-in battery for Mobile Use

ZTE MF286 looks similar to the traditional wireless home router, but in this new router, ZTE had designed a built-in battery so that users can not only use the MF286 as a stationary router at home, but also take the MF286 router outdoor for mobile use. With the 3000 mAh battery, ZTE MF286 can support a conference call for up to 4 hours or share a 4G network for up to 3 hours. It can’t be taken in a pocket like ZTE MF970 LTE Cat6 MiFi, but it’s useful for multiple devices’ network support.

ZTE MF286

High-speed 4G Connection

Like the Huawei 4G LTE Cat6 routers, ZTE MF286 can achieve peak download speed to 300Mbps and upload speed to 50mbps on LTE networks. The speed is almost the double of the current speed on LTE Cat4. If user downloads a movie of 1GB, it may only take few seconds on this speed. ZTE MF286 Router can achieve this due to the Qualcomm WTR3925 RF transceiver chipset based on the 28 nm process with the Qualcomm MDM9230 modem based on the 20 nm process. The new chipsets perform better and consume less power than its predecessors.

Dual-band WiFi and support for 802.11ac

Compare with the current home routers, ZTE MF286 CPE has almost the highest level to support WiFi 802.11b/g/n/ac and 3 x 3 multiple-input multiple-output (MIMO) technology with three spatial streams for maximum performance. It operates on both 2.4 GHz with great wall-penetration capabilities and 5 GHz with a lower chance of picking up interference. The powerful gadget also supports gigabit wired connections so that it is possible to copy files over a LAN at a speed higher than 80 MB/s.

In the test, ZTE MF286 proves to have good signal coverage; it can cover an office larger than 500 square meters. The signal attenuation is not obvious even at a point far from the device. Internet surfing is smooth, even in a meeting room separated by glass doors.

ZTE MF286

High-Definition VoLTE Call

Conference calls are an indispensible part of business interactions. As a standard feature for high-end wireless routers, ZTE MF286 supports advanced VoLTE voice calls. You can connect it to a telephone or a conference hands-free telephone system to get a much better call quality than regular telephone calls.

With 4 RJ-45 Ethernet ports, there is a USB port which connects a USB disk to share pictures, files or videos among the users on the same WiFi network. As ZTE’s first 4G LTE Cat6 router, the MF286 Router has many selling points which are practical for users. But Huawei E5186 has been on the market almost one year ahead of ZTE MF286, we can’t tell whether the MF286 will gain the trust from customers even though Huawei E5186 CPE doesn’t have the battery.

Netgear Aircard 790 vs Aircard 785s

Netgear AirCard 790 is the natural evolution of the Netgear AirCard 785S, a portable 4G router that our staff has tested in the past. We recently had the opportunity to test the new version and compare it with the previous model, allowing them to assess fully all the improvements in relation to the significant price difference between the two devices.

New looking

Netgear has managed to improve what already presented itself as a great 4G router. In favor of a more rounded and minimal design, the new AirCard 790 abandons the square lines of 785S.

On the front facade stands a much larger display that tells you some information about connection on the touchscreen, where the base is no longer angular. To protect the battery compartment and microSIM, there is a much more rounded shell and comfortable to grip. The frame of aircard 785S was silver in color and visually conflict with the rest of the device, where it is dark gray, amalgamating with the rest body.

On the top side of Netgear Aircard 790, instead of two buttons (on Netgear AC785S are On/Off button and Multifunction), there is only one button for on/off, a yield possible simplification thanks to the adoption of the touchscreen display. On the opposite side we find then the two inputs for connecting the antenna (antenna is sold separately) to enhance signal reception and 9-pin microUSB input.

Regarding the latter, there is no clear explanation why that would have prompted the company in the choice (in the user manual there is no mention about this) of supplying a cable with the best known micro USB 5-pin. It’s clear that the microUSB cable adopted is suitable for almost all electronic devices currently on the market. This can’t connect seamlessly into the wider opening 9-pin, but if you are not careful, it threatens to ruin the port when inserting.

Touchscreen

As anticipated, the main novelty of the aircard 790 is in the display, wider (5 x 3.7 cm against 3.5 x 2.7 centimeters of the 785S) but mostly touchscreen. You can select items with the touch of our finger rather than only using a key to scroll the list as instead we used to do with the previous model. What’s more, there are two capacitive buttons, “Home” and “Back”, respectively, to return to the main board or return to the previous screen.

The main facade just shows a touch on the name or password for WiFi to change this information on the fly, using the keyboard displayed briefly on the screen, as well as by clicking, the usage statistics will be possible to have a quick overview on your data plan, with a lot of data (in GB) used from the start day of the plan, the number of days remaining before renewal and a button to reset the counter at any time.

Finally, there are three additional buttons located on the bottom bar. With WiFi you can access the WiFi network information, enable or disable the 5 GHz network, activate a guest network to temporarily connect a host, manage the connected devices (maximum 15 together), block unwanted ones even if they know the password, give priority on the amount of data used by one rather than others, decide the standby time, increase WiFi coverage at the expense of the autonomy and more.

On the Messages panel, you can only read text messages received in the microSIM in use, being able to eliminate them with a single touch. Finally, the Settings tab, you will have quick access to the display settings (language, brightness LEDs, the display timeout, WiFi info on the screen, etc.), to the mobile broadband (3G/4G, roaming, etc.), mode plane (useful to use the device in Battery Boost mode which will be discussed below), the tethering mode and general information, including the software for upgrade cards, restore factory settings, and little else.

In our tests, we cannot say enough about the touchscreen of aircard 790, as it completely eliminates the need to access the router via web or mobile application panel (both are options still available, but are no longer essential or necessary to start using the router immediately or modify one or more parameters if it is considered necessary). Have everything at your fingertips at any time is one of those features that, after having made a habit, you will find it hard to give up.

Battery Boost Function

Another new offer of Netgear AirCard 790 is the ability to leverage the internal battery (thanks to the supplied cable) to charge a device if needed. Our tests showed that the 2,930 mAh of 790s routers are able to restore about 60% of the energy of an iPhone 6 Plus, this means that if the phone is completely power off, you have the ability to charge roughly 10-20 %.

The battery of aircard 790 has larger capacity than the aircard 785S (2,000 mAh), but we did not find benefits in this difference in everyday use, because we were able to use for more than 8 hours in the whole office with two devices connected via WiFi.

USB tethering

Thanks to the tethering function, another novelty that we find in AirCard 790 is that you can surf the Internet by connecting the router to the computer’s USB socket: in this way you will avoid the WiFi connection and at the same time recharge the internal battery of the router.

This option is useful especially in the home, since in this way a single power outlet will be occupied. Also when you want to quickly connect a computer to the Internet without activating the guest network (just in case a friend), or when the netgear 790’s energy is running low and you need a few more hours for surfing, the only way is to recharge the internal battery by the USB connection.

Same Good Performance

Here, an obvious difference between the two routers is more difficult. Theoretically, the AirCard 790 could in fact provide connections up to 300 Megabits on LTE Advanced (Cat6), but it also support up to 100 Megabits of the LTE Cat4 which is also supported in the AirCard 785S. In reality, we did not notice obvious differences in navigation. At the same location and same time, they provide network connection at similar speed; Aircard 790s didn’t provide much faster speed as described. Perhaps the LTE Advanced network is not available here. Aircard 790s can’t connect the fastest possible network.

Conclusions

Those who are using a 4G router every day, especially those who usually travel abroad, we would recommend Netgear Aircard 790 to buy. Even those who have the need to frequently access the router settings may find useful from the touchscreen in the new model.

However, we believe that the AirCard 785S is still a great 4G router at a budget price, and could provide the best choice for those who simply use a router occasionally, to use perhaps only at weekends.

Netgear AirCard 790 4G Mobile Router Review

Now that most cell phones have features to share the wireless Internet connection, such routes may be convenient if there are multiple users to share a mobile broadband connection.

Many wireless routers for mobile broadband are either locked to a specific carrier, or they have quite a few limitations. Netgear new 4G router Aircard 790 is not locked to any carrier, which supports most frequency bands and could be used around the world, and the Netgear 790S is so packed with features that we have not seen in any of other similar routers that are usually offered from operators themselves.

The router AirCard 790 is slightly smaller but thicker than a mobile phone. Here are our first impressions:

Supports 4G in Category 6

The user interface is easy to use via the touch screen.

Netgear AirCard 790 price is better now than few months ago since the successor Netgear Aircard 810s is available now. Netgear 4G routers are much more advanced than the average router. The Aircard 790 support 4G (LTE) Category 6, thus speeds up to 300/50 Mbps. And when you share mobile network, the WiFi standard is made via dual-band 802.11ac at both 2.4 and 5 GHz simultaneously. Up to 15 devices can connect to the router simultaneously, and you can easily set up a guest network.

Handsome touchscreen

The Netgear AC790S router is very easy to use. After you’ve installed your SIM card and turned on the router, the network name (SSID) and wifi password will show on the screen. You can easily enter and change settings directly from the touch screen of the router. And enter http: //netgear.aircard in the browser on your PC, you can possibly manage the AC790S Router wirelessly.

The touch screen is incredibly handsome, which allows you to do everything you normally need in a browser user interface, and in a very intuitive way. Via the screen, you also have an overview of how much data you’ve used. You can also see which devices are connected to the router, limiting the number of units, and optionally block unwanted devices.

There are two connectors for an external antenna.

Battery life is rated at 11 hours, and you can select the transmitting power of WiFi network so you can save energy if you use the router at a short distance. You can of course use the router by connected with the USB to PC. Otherwise, the router can also be used wireless for your mobile phone.

We mentioned that the router can be connected to an external antenna. Netgear even sells an antenna to increase antenna efficiency by up to 50 percent. We 4gltemall.com also provides suitable budget external antenna for Netgear Aircard 790s which had been used by many users and proved to be reliable: http://www.4gltemall.com/4g-antenna-two-ts-9-connector.html

Conclusion: A super router

In all, we have a very good impression of Netgear AirCard 790. We have used it a little while when commuting by train, and the AC790S router has served impeccable. It does not get much more via the Internet sharing feature in your mobile phone, but with the mobile broadband Netgear 790s, users can do much more than expected. What’s more, it save much power consumption for mobile phone.

Netgear Aircard 810 – World’s Fastest 4G LTE Mobile Hotspot

Netgear has launched a new mobile hotspot AirCard 810 on the market. The device has been shown in January at the Consumer Electronics Show (CES) in Las Vegas. Now it is also available in this Australia for the network provider Telstra and named Telstra WiFi 4G Advanced III, and Netgear 810 is visually similar to its predecessor Netgear AirCard 790. However, the new model Netgear AC810S has some additional features that we will test in more detail.

Netgear aircard 810s front

The most important change is the support for LTE Cat. 11, which means the mobile Wi-Fi hotspot can support mobile data transfers at up to 600 Mbit/s, a speed that the bundling of three 20MHz and distribute a UMTS or LTE-based Internet access to up to 15 devices. Thus, the aircard 810 is currently the fastest mobile hotspot on the market.

In many countries, such high speeds of the mobile network are not yet available. However, the current mainstream providers offer top speeds of 300 or 225 Mbit/s over 4G networks, which achieve higher maximum data rates for mobile Internet access. Now Netgear AirCard 810 seems to be a corresponding future-proof device.

netgear aircard 810 package content

2G Network Support is Missing

However, the aircard 810 is not perfect actually. Although top speeds over LTE are made possible and also in the UMTS networks downstream possible speeds are up to 42 Mbit/s due to DC-HSPA technology, netgear 810s can’t access to the GSM, GPRS and EDGE networks. The 2G access should be at least a basic supply for use in geographic areas, where simply no UMTS or LTE expansion exists. The distribution of an already very slow Internet access via WiFi to multiple other devices is certainly less sensible. The Netgear AC810S router can be but also connect directly via USB to a computer and then used as a wired modem for internet access.

netgear AC810S home

Another interesting innovation compared with the Netgear AirCard 790 is the ability to not only redistribute a mobile Internet access, but also an existing wireless network. The Aircard 810 router can ensure for better reception as a repeater, especially work as a hotel hotspot and similar Internet-access distributed over several devices.

Netgear Aircard 810s sim slot

A big advantage over Aircard 810s mobile hotspots from other manufacturers is the ability to make many settings directly via the touchscreen. Quick SSID or change the password? No problem. After inserting a new SIM, the Internet settings do not have to be entered manually. This could also do directly on the touch screen.

Netgear Aircard 810s Antenna connectors

The Netgear 810 touchscreen dimensions of 112 x 69 x 15.5 millimeter are also one of the main criticisms over its predecessor: The display reflects very strong. It also takes fingerprints on unusually strong, which looks ugly if intensity of use and you do not wipe the screen clean repeatedly.

About the screen, the most important is that not all operating steps for Netgear AirCard 810 are accessible. Those who need access to all settings can use the web frontend via the Internet browser of a connected computer. Here, for example, Wi-Fi hotspots also can be set to be redistributed to the Netgear handheld. Once set, the AirCard 810 automatically uses one of the configured hotspots instead of UMTS or LTE as soon as one of the wireless access is received.

Apps for almost all smartphones and tablets

Another possibility to adjust the configuration of the Netgear aircard 810 router is the Netgear APP. Netgear offers Mobile Apps for Android, iOS and Windows Phone. Network access is naturally only possible if the smartphone or tablet is connected to the mobile hotspot. The Netgear AirCard 810 weighs 132 grams, making it even four grams lighter than its predecessor. Above all, the device is easier to handle and lighter than many current smartphones. The handheld is completely pocket-fit. It is important to remember that cell phone coverage and wireless range suffer if the unit is operated close to the body.

We have tested the Netgear AirCard 810 in mobile networks. The reception was well in both LTE and the UMTS field network. By eliminating the 2G, the Aircard 810 router connection has often still held to UMTS or LTE network in less-served regions, without the need for manual adjustments. In LTE 1800 network, we came up data transfer rates of 120 Mbit/s downstream. This is a good value. But we could not test Carrier aggregation at 1800 and 2600 MHz.

Netgear Aircard 810 web interface (2)

WLAN at 2.4 and 5 GHz

The Netgear AC810S router sends the default wireless frequency range of 2.4 GHz, as an option, 5 GHz is also available. Moreover, it is possible to establish also a guest mode. Compounds can be easily prepared by WPS. The range of the hotspot is considerably higher than that of the Huawei E5372, which we used for comparison. It is important to remember that it is not a very recent model of the Huawei MiFi.

The battery of the Netgear 810s hotspots has a capacity of 2930 mAh. The manufacturer promises eleven hours operating time. We have achieved more than ten hours in practice. Particularly pleasing: Unlike many competitors, aircard 810 allows the battery exchange also. Also interesting is the possibility to use the mobile hotspot as a battery pack, such as a smartphone entrained recharge.

Conclusion:

The Netgear AirCard 810 is not cheap now at www.4gltemall.com. This is a device that has convinced functions during the test even after long hours of continuous operation and thanks to LTE Cat. 11, the technology dominates the near future. The MiFi is well made and is pocket-fit. If required, connect an external antenna.

The pity is the lack of GPRS and EDGE. Another criticism is the supported LTE frequency ranges. Although all common in Europe bands are covered, it lacks some LTE frequencies for the American market, so you may only use 3G network in American areas with the Aircard 810. But in all, the Aircard 810s is a very good mobile router to commend for travelling over the world.

Huawei MiFi E5372 4G Pocket Router Test

Mobile Wi-Fi hotspots, also known as MiFi, are for users who travel a lot, now become socially acceptable. They also have many advantages: In addition to their small size and light weight, they can provide wireless internet access with a data plan for several terminals. They can also be placed on the window to have reception even inside the often insular spaces, as opposed to data sticks in conference rooms.

A new 4G mobile hotspot from Huawei is available now; the model number is Huawei E5372. We could test it extensively in recent weeks. It is distinguished by some additional features that are not commonplace at a MiFi. The E5372 MiFi is now available at many countries for network providers, and the prices in online stores are currently very attractive.

HUAWEI-E5372s-4G-LTE-Cat4-Mobile-WiFi-4G-Hotspot (6)

The display of Huawei Mobile WiFi E5372 is on the front. Although it looks as if it could bend, it is “only” a recessed display. But there are advantages. If the hotspot once configured, the user sees, which network standard and which provider he uses straight and can even read the password of the MiFi. So if someone gets the hot spot in the finger and the display turns on, he sees not only what wireless identification device emits, but also the same password.

HUAWEI-E5372s-4G-LTE-Cat4-Mobile-WiFi-4G-Hotspot (1)

The operation of Huawei E5372 mobile hotspot is quite convincing; the configuration is easy to do: The wireless identification of the device is clearly seen including the first password under the battery on the display. About the Web interface, which is unlike other Huawei devices, user can enter the interface 192.168.8.1 and do the settings and see details information. It was noticeable in our test with an original telecom card that it’s initially not to connect with LTE network. In the APN settings we got the problem on the track: there is a telecom APN deposited, which is not compatible with LTE. We had to create a new profile and the hotspot worked in both the 800-MHz networks in the countryside but also LTE networks in the city. In a poor reception signal, an external antenna can be connected with TS9 connector.

HUAWEI-E5372s-4G-LTE-Cat4-Mobile-WiFi-4G-Hotspot (2)

Up to 150 MBit/s should be able to transmit in the Huawei E5372 hotspot, thanks to supporting LTE Cat4. In our test, we were not able to achieve these data rates in the mobile network or a potentially congested wireless channel in the heart of Berlin. Nevertheless, we achieved data rates far above the usual DSL rates. Even in rural areas with a large distance to the cell, LTE transmission could reach in the range of about 20 Mbit/s.

HUAWEI-E5372s-4G-LTE-Cat4-Mobile-WiFi-4G-Hotspot (3)

But the Huawei E5372 can do even more: Using the Web menu in the tab “More” allows access to the memory card, which can be placed in the unit. So the Huawei E5372 MiFi can work as a modem in addition to his function for up to ten devices as a common space. In this way, the plugging of memory cards could share files like in USB sticks. In the release procedure, it is even possible to allow only a single folder and not the entire memory card.

What’s exciting is the wireless repeater function. Instead of using the mobile interface, it is possible with the E5372 to register with a WLAN network. Then the Mobile Hotspot can extend wireless network even when No sim card is available.

HUAWEI-E5372s-4G-LTE-Cat4-Mobile-WiFi-4G-Hotspot (5)

In our test, we were able to use the repeater function of the E5372 Mobile Hotspots. And the surfing speed is good enough for daily usage. The connection is stable and in interruption after connected to wireless network. Huawei E5372 is a good pocket router with budget price now. It’s recommend for travel or business trip.

Netgear AirCard 785S 4G Mobile Router Review

If you need the Internet to work or surf on the road, there are many mobile hotspots available now to provide good solution. We’ve put Netgear AirCard 785S to the test in recent weeks. The portable WiFi hotspot for 4G Internet is useful for all our connected devices and keeps working a whole day without any trouble.

Small (11 x 7 x 1.4 cm) and lightweight (125 grams including battery), fits easily in a pocket. The whole body of Aircard 785 is made of high quality plastic and is extremely easy to use as it has only two buttons: ON/OFF to switch on and switch off the router, and a navigation button to scroll through a few simple options that can be activated directly from the device without interfacing through smartphone apps or web panel. There is in fact a small LCD display (3.5 x 3 cm), which focuses on all the key data and allows you to choose between different modes for use with a few clicks.

At the opposite edge to that where we find the two buttons, the microUSB input are located for charging the lithium battery of 2,000 mAh (removable) and two sockets for connecting external antennas, available separately and useful – but not essential as we will demonstrate through our testing – to increase the power and reach of the signal. The back cover is removable and there is the microSIM slot below the cover.

Display

On the LCD screen of Netgear Aircard 785, usage data, WiFi name and the WiFi password are shown. This means that those who are nearby and peers on the screen can potentially find out the password to access and leverage your data plan. Since the information on the screen cannot be hidden in any way, and whereas power on, the screen will remain active for 30 seconds (default timeout is 1 minute), it is perhaps advisable to turn the router while using in public places.

In addition to this information, the Netgear AC785S screen will also show some icons, specifically the classic 5 bars that just like on mobile phones, shows the signal strength; 3G/4G symbol to know at a glance the type of network to which you are supporting; the WiFi symbol with a number overlay that represents the number of connected devices; the two arrows to learn about the data transmission activity in real time; any envelope to indicate the presence of unread messages; and the battery indicator.

In our view, the lower portion of the display, if configured, allows you to monitor your data consumption in practice. If you’re using a monthly subscription, you can select the day when you renew your subscription and know at a glance and in real time the precise GB consumed from day one.

Configuration

Inserted the SIM card into the Aircard 785s, connected the battery and close the cover, it just has to turn on the router by pressing the ON/OFF button for a few seconds. In just around 10 seconds, it will be immediately ready and connected to the Internet. Unlike the successor Netgear Aircard 790, the aircard 785s can’t be operated via screen.

At first, it is advisable to change the default password for your Netgear 785 Mobile WiFi, thus making sure that no other device in the vicinity can connect to the network and use their data subscription. To configure the router, you must first connect to it with a device via WiFi. At that point, you can follow two paths: you can download the application Netgear Aircard App to your smartphone or through any browser (including mobile), go to the address http: //netgear.aircard/.

Netgear Aircard 785s HOTSPOT

Then you log in to the administrator panel. The default password is “password” and, like that of WiFi, it is advisable to change it from the first access so as to prevent connected users to do the settings.

We tried both systems and we preferred access via the web panel, which we thought was immediately simple and straightforward. The application interface, on our iPhone 6 Plus, it is not optimized for this display appears overly large, but it works without problems and offers quick access to all the desired functions.

Functions and settings of the router

In addition to changing passwords for the Netgear AC785 Aircard, access to the panel can be useful for reading text messages without having to remove the SIM card to insert it into a cell. Experts can also customize every detail, however, in our tests we have found that in fact, the system automatically recognizes the card operator and set the correct parameters automatically.

From the 785s aircard Settings panel, you can select the language, choose the screen brightness and display timeout, enable or disable the LED indicator and decide after how many minutes/hours of downtime the router can automatically turn off WiFi to save battery. You can also export all configurations jack to a file so that, as a result of a possible recovery, you can re-import them with a click without having to again lose time sifting through the various panels. We enclose a photo gallery where you can take a look at all the functions accessible via the web panel.

Field tests

We used the Netgear 785s router every day for more than a month, and when connect MacBook, two iPhones and an iPad simultaneously, we didn’t ever encounter any problems. The connection to the Aircard 785 was always stable and high performance, even when the router was located on the opposite side of our small apartment.

We have also tried the external antennas, but only with router and no extra accessories, about 15 meters away and with two walls to separate the connected devices, the testing terminals had continued to function without too much trouble. Specifically, the reception of the WiFi signal was obviously weaker, the response in navigation proved slightly slower but still quite functional and useful to allow us to work smoothly.

The optimal working condition on Mac was in the same room without walls to separate them, even at more than 5 meters away. Here, the reception is always optimal, and thanks to 4G connectivity guaranteed by our membership, on many occasions, the speed through Netgear 785 aircard is even faster than the ADSL line of our house.

Conclusions

The Netgear AirCard 785S provides the most convenient solutions to have a 4G hotspot in your pocket and connect all mobile devices. And it’s the ideal choice for those who must work on the computer while traveling, for those who are on vacation and want to offer Internet to the whole family, but also for those who have a WiFi iPad and do not want or cannot take advantage of the hotspot mode for iPhone to connect to the Internet.

Among the Aircard 785s features, we liked the most is the Guest mode that can be activated directly from the router with a few clicks by the instructions on the screen. In practice, the Guest WiFi can offer temporary access to the Internet for a friend without telling your master password. The Aircad 785s is really recommended for your mobile network partner!

Samsung Presents New Galaxy Note 7 Smartphone

A few days ago, Samsung introduced its flagship smartphone the Galaxy Note 7 for the second half of 2016. Since the predecessor Galaxy Note 5 and Note Edge have been available for only short time, the Note 7 is finally again officially available in many markets. The Galaxy Note 6 will not be seen, Samsung skips these numbers for the same name for the Galaxy A and C series. Technically, users can get the Galaxy Note 7 at modern features, for example, a high-quality camera, an iris scanner, a fast processor and a very large internal memory. The display is rounded off to both sides.

Galaxy Note 7 with edge display

The display size of the Samsung Galaxy Note 7 is just 5.7 inches, and is slightly rounded down at the sides, as you already know it from the Galaxy S6 edge and Galaxy S7 edge ago. The resolution is 2560 x 1440 pixels and is the same to the predecessor models. A version with a flat display does not exist. The body of Galaxy Note 7 consists of both front and rear glass and is protected against dust and splash, and Samsung has made the Note 7 on the certify IP68.

The back camera of the Samsung Galaxy Note 7 triggers with 12 megapixels. This is a rather low resolution comparatively with the Galaxy S7, but in Note 7, the Dual Pixel technology is used, which is particularly sensitive to light and therefore to take good pictures in low light conditions.

Battery and USB Type C

The Samsung Galaxy Note 7 battery is 3,500 mAh strong and not replaceable by the user, because the battery is permanently installed in the smartphone. For recharging and connection to the computer and other devices, a USB Type C port is used for the first time while in previous Samsung device, there was Micro USB. Of course again, a pen for operation and for drawing, can be recessed into the smartphone.

Installed iris scanners

It’s the first time for Samsung smartphone to install an iris scanner. A fingerprint sensor is also built, which should be able to easily unlock the Galaxy Note 7. But security should be much better at Iris scanner. Here we should wait the first user’s report about whether the response is really as fast, simple and reliable as Samsung promises.

LTE Advanced cat12

Samsung has the Galaxy Note 7 equipped with a modern chipset, a 64-bit Exynos comes with eight-core processor for use, and the 6 gigabytes RAM are available. The internal memory of 64 gigabytes is available and expandable up to 256GB, which is the largest available microSD currently.

The modem in the Samsung Galaxy Note 7 may support LTE with up to 600 megabits per second in the downlink (LTE Advanced cat12). This is made possible by bundling up to 3 frequency ranges (3CA). In Germany, Vodafone has recently launched LTE CAT9 with 3CA at up to 375 Mbit/s possible. Of course, the modem is also backward compatible with older LTE categories and UMTS & GSM in Samsung Galaxy Note 7. Moreover, voice telephone (VoLTE) is also supported.

Available From September

Samsung Galaxy Note 7 will be available soon in Europe and Asia markets. We suppose the retail price is significantly more than that of Samsung Galaxy S7 edge. But the price will be available when it’s presented to public. You will see the price on www.4gltemall.com in near future.