HUAWEI 4G LTE CPE/Router Archives – Page 12 of 16

Huawei Presents B5328 4 X 4 MIMO LTE Router

Around the end of 2016, Huawei offers the world’s first commercial LTE router B5328 with 4 × 4 MIMO antenna technology. The B5328 LTE Router offers significantly higher data rates in a correspondingly equipped network than devices with 2 × 2 MIMO antenna technology. The Huawei B5328 is the successor to the popular Huawei E5186 LTE Router. In the free trade, the Huawei B5328 is currently not available; however, interested network operators and service providers can order the device on request and thus make available to their customers.

Based on the GCT’s GDM7243Q, the only LTE-A chip commercially available that offers 4×4 MIMO capability, enables Huawei B5328 LTE CPE with higher data rates and throughput while using limited bandwidth (“double speed” with the same limited bandwidth), which is a scarce commodity for network operators.

By integrating the receiver with four antennas and equipping the base station with four transmitters, mobile operators can maximize the use of their spectrum. Huawei B5328 is the successor to Huawei E5186 4G LTE Router. With GDM7243Q chipset, Huawei B5328 cpedelivers LTE Category 5/6/7 throughputs with double speeds enabled by 4X4 MIMO technology, and supports Voice over LTE (VoLTE) and eMBMS (LTE broadcast) as well as other advanced features.

The Huawei B5328 was already introduced in December 2015, but so far only supplied to very few operators, as most LTE networks currently set to 2 × 2 MIMO antenna technology and the B5328 router has no appreciable advantage in such networks to the predecessor model Huawei E5186 Router. You can buy the B5328 for example in Tunisia with the provider mobilis.

Some European network operators have already carried out tests with the Huawei B5328, for example the Czech Vodafone. Vodafone has achieved test with 4 × 4 MIMO antenna technology and Carrier Aggregation around 300 Mbit/s in the downlink.

The Huawei B5328 has no telephone function in the currently available version B5328-155 and has only a single RJ45 Ethernet connection on the back. The WLAN module works only on 2.4 GHz (WiFi 802.11 b/g/n), the exact speed I could not find unfortunately. Basically, the B5328 appears not to be a high-end router in the face of quite meager facilities, while the previous Huawei E5186 LTE CPE had a much greater variety of functions (Wi-Fi 802.11ac and 4x Gigabit Ethernet).

The Huawei B5328 LTE router will also come to the market in Germany, Austria or Switzerland. As we know, the China Mobile will also use this device for the upgraded LTE-Advanced TD-LTE network. From today’s point of view, there is not much to be in favor, as network operators rely on 2 × 2 MIMO antenna technology, higher modulation (256QAM) and frequency bundling to increase the speeds in their LTE networks. Currently, the Huawei E5186 is still dominating the market for 2 X 2 MIMO LTE networks.

Huawei E5170 LTE Cat4 Cube Review

Huawei had a series of web cube for wireless networks at home. The wireless cube looks like a nice furniture rather than a wireless gateway. We had introduced the Webcube B153(7.2Mbps), Webcube B183(21Mbps), Huawei E8259 Speed box(42Mbps) before. Now we have a new 4G/LTE Speed box/Cube E5170.

HUAWEI E5170S-22 LTE CPE (6)

Huawei E5170 is a powerful LTE (4G) router. The device is a combination of fixed and mobile router, supporting a top speed of up to 150 Mbit/s for downloads (on LTE 4G). Huawei e5170 Home Net Box is one of the fastest wireless routers available in the market.

Built with a rechargeable battery and docking station, Huawei E5170 Home Net Box basically consists of two parts: the current router with integrated modem and wireless module for up to 32 wireless devices, as well as a docking station that provides the router with power and also contains an RJ45 Ethernet LAN interface connection. The special feature is the built-in battery for Huawei E5170, which allows wireless operation for up to 2.5 hours without docking stations, as expected, the E5170 cube could be working like a 4G mobile pocket router.

The configuration is usually through a web interface, so that the browser of any terminals can do the setup. Configuration through the application of Huawei Mobile WiFi is also possible. Huawei E5170 speed Box integrates a fast LTE modem which his supports GSM, UMTS and LTE cellular standards. In the fourth generation, wireless network could reach up to 150 Mbit/s for downloads and up to 50 Mbit/s for uploads due to the use of LTE Category 4 technology. Using UMTS, the maximum speed for downloads could achieve 42.2Mbit/s provided the network is equipped with DC-HSPA+ technology.

If coverage is poor, Huawei E5170 LTE Cube has two external antenna connectors for LTE or UMTS. The connection would be much more useful for computers, tablets and other devices via Wi-Fi 802.11 b/g/n, and browsing speed could reach up to 300 Mbit/s, unfortunately, neither the 5 GHz band nor fast Gigabit 802.11ac Wi-Fi is supported.

Below are the technical specifications for Huawei E5170s-22 LTE Cube:

* Support LTE FDD/TDD/UMTS/GSM networks

– 4G FDD 800/900/1800/2100/2600Mhz
– 3G UMTS/HSPA+ 900/2100 MHz
– 2G 850/900/1800/1900 MHz

* LTE Category 4 wireless gateway

* DL 150Mbps / 50Mbps UL @ 20MHz (FDD)

* 112Mbps DL / UL 10Mpbs @ 20MHz (TDD)

* Wi-Fi 802.11 b/g/n

* Support up to 32 wireless devices

* 2 x Antenna interface

* 1 x RJ-45 interface (> 150Mbps) on cradle

* 1500mAh battery (optional)

* Support IPV6

* Support Windows XP/VISTA/7/8, Mac

Actually, Huawei also release Huawei E5180 Speed cube for LTE networks. But Huawei E5180 has larger dimensions than E5170 and without inserted battery. If you want to know more about E5180, welcome to click here: http://www.4gltemall.com/huawei-e5180-4g-lte-cpe-router.html

Huawei E5175 E5175s-22 4G LTE Cat6 Wireless Router Overview

In the past year, Huawei E5186 4G LTE CPE becomes well-known because it’s the world’s first LTE Category 6 wireless router for LTE-Advanced network with carrier aggregation technology. And till now, there is no newer model to be released from the Chinese manufacturer Huawei. Actually, there was a model which was released even before Huawei E5186. The model number is Huawei E5175, which is also a LTE Cat6 wireless router for the latest LTE networks.

Huawei E5175 Front

However, the Huawei E5175 is not presented at Huawei official site. We don’t know why, and as we know, many Huawei mobile broadbands are not listed there. So we can’t find the official specifications for Huawei E5175. But we can find the technical specifications somewhere.

Huawei E5175 Back

Huawei E5175 4G Router specifications:

* LTE Category 6 wireless router

* LTE CAT6 download speed up to 300mbps, and upload speed to 50Mbps

* Support 4G LTE Band 1/3/7/8/20/38 (FDD DD800/900/1800/2100/2600MHz, TDD 2600MHz)

* Support 3G DC-HSPA+/HSPA+/UMTS 900/2100MHz

* Support 2G GSM/GPRS/EDGE 850/900/1800/1900MHz

* WiFi 802.11b/g/n/ac, 2.4GHz/5GHz, support up to 64 wireless devices

* 4 RJ45(GE) interface + 2 RJ11 Interface + 1 USB host interface

* Two External antenna connectors(Recommend Huawei E5175 4G Antenna: http://www.4gltemall.com/4g-antenna-two-sma-connector.html )

4G LTE Indoor Antenna (2 x SMA Connectors) for Huawei/ZTE 4G LTE Routers/Gateway/LTE CPE

Like its predecessors, Huawei E5175 is in flat design, it can stand on desk. The top front are the LED indicators for Power, Network mode, WiFi, Voice, Signal. And the Huawei logo is at the right side. On the back of the CPE E5175, there is a label which show many information about the device such as the model number (Huawei E5175s-22), Power Rating (12V, 2A), IMEI number, S/N number, Web site (http://homerouter.cpe), Web user name and password, SSID and WiFi key.

Huawei E5175 back label

Above the label, there is a plastic cover which could be open and below it, there are two connections for external antennas. The connector type is SMA. At the below side of the label, the interfaces are listed in a line. There are 4 RJ45 LAN ports, 2 RJ22 telephone interface, 1 USB host interface, 1 power plug hole and 1 power button(on/off). And on the back of the E5175, the body has many vents for heat radiation. At the bottom of the router, there are also many vents for this.

Huawei E5175 Top side

The Huawei E5175 can work with SIM card directly. The SIM card slot is at the side body. Open the cap on the sim card slot, user can insert a valid SIM card. After power on, user can get connected with wireless network. Below the SIM card slot, the WPS and WiFi buttons are there. Between them is the hole to reset the Huawei E5175 to factory default.

Huawei E5175 bottom

From the appearance and interfaces, the Huawei E5175 is very similar to Huawei E5186 Router. We will take a test next time to see which one could provide faster wireless network. But from the specifications, Huawei E5175 is a good router which could work on 4G LTE/3G UMTS/2G GSM networks. Up to 64 wireless users could get connected with Huawei E5175. The most important is that it can achieve peak download speed to 300Mbps and upload speed to 50Mbps.

huawei E5175s-22 sim card slot and WPS button

Currenlty, there is few 4G routers which could support such high speed connection. If you are looking for a LTE Router with the latest technology supporting LTE-advanced network, Huawei E5175 is a trustful one to consider.

Huawei B315 4G LTE Router Overview

Huawei released a new LTE CPE B315, compact stationary LTE-router, which supports LTE cat.4 (up to 150 Mbit/s), and focused on the use of the house or in a small office. Technically, nothing is outstanding, but it works well and does what it should do.

Huawei B315 4G Router

Huawei LTE CPE B315s-22 Specifications

The full name for Huawei classification model – LTE CPE B315s-22
Supported network standards: GSM 900/1800 MHz, UMTS 900/2100 MHz, LTE-FDD 800/1800/2600 MHz, LTE-TDD 2600 MHz.
The data rate for LTE-FDD technology – up to 150 Mbit/s for downloading data and up to 50 Mbit/s for uploading data; for LTE-TDD technology: download up to 112 Mbit/s and data at upload to 10 Mbit/s.
The data transfer rate for DC-HSPA+ technology: up to 42 Mbit/s for download and up to 5.76 Mbit/s for upload.
Transmission speed via EDGE data: Up to 236.8 kbit/s for downloading and up to 118 Kbit/s for uploading
Support for 802.11 Wi-Fi a/b/g/n, 2.4 GHz data rates up to 300 Mbit/s, intelligent noise reduction system.
Support for simultaneous connection of up to 32 Wi-Fi devices.
Support for automatic backup Ethernet-connection to the Internet.
Three LAN ports, one (fourth) LAN/WAN.
RJ11 port for connecting a wired phone.
USB connector for connecting an external drive or printer.
Support for receiving and sending SMS.
Support for voice calls SIM-card in both directions, including the LTE network (CSFB).
Dimensions and weight: 186 x 139 x 46 mm, 275 g

After testing, I would describe Huawei B315 LTE CPE as a modern budget “workhorse” with a set of features sufficient for most users. But many desirable technical delights you will not find here.

Supporting LTE cat.4, a theoretical maximum data rate of 150 Mbit/s for downlink and the data up to 50 Mbit/s for uplink could be achieved. Wi-Fi standard is 802.11b/g/n. Wi-Fi range includes only 2.4GHz, No 5GHz. The maximum number of connections for Wi-Fi is 32 users.

Huawei B315 4G Router2

Huawei B315 LTE Router supports network standards: GSM 900/1800 MHz, UMTS 900/2100 MHz, LTE-FDD 800/1800/2600 MHz, LTE-TDD in the range of 2600 MHz. There is no back-up battery. SIM-card is normal, miniSIM format. On the back, there are four LAN ports, one universal LAN/WAN. USB port is for connecting a printer or USB-drive. And there is RJ11 jack for connecting a wired phone. They write about the support VoIP and VoLTE on the next version of the software, CSFB support is present and works fine. Two Connectors for MIMO external antennas is there, the SMA standard, external antenna is not included with the B315 Router. If you need the external antenna for LTE CPE B315, you can check it here: http://www.4gltemall.com/4g-antenna-two-sma-connector.html

Huawei B315 Antenna

The B315 router can provide very good coverage of Wi-Fi. And it’s clear and fast to switching between wired and mobile internet in both directions. The advantages of the B315 are in compact size; there is almost no need to configure anything, a good reception on the built-in antenna, a clear work and visual indication. The disadvantages are lack of Wi-Fi range of 5MHz, no tweaks and additional features. For example, no built-in torrent client, the USB-port does not support a second modem connection etc..

huawei-b315-4g-SIM card slot

The package box of Huawei B315 includes quite compact router, user Manual, an Ethernet cable, external power supply to the output current of 1 A. Once again, external antenna not included, and you will have to buy yourself if necessary. There are two colors available: black and white. The body of B315 LTE CPE is made of plastic but feel good if hold it in hand.

huawei-b315-4g-Ethernet ports

As already written, all the connectors and other features are hidden on the back panel, including slots for external antennas, which in most cases you do not need and they are covered by a removable cap.

The button to activate WPS is on the top of Huawei B315 Router, for the on-off, the button must be held down for 3 seconds. Besides the WPS button, it’s the power button. On the bottom of the CPE B315, all the necessary information about the network SSID, passwords, etc. are listed on the sticker. At the left side of the external antenna, it’s the SIM card slot, it’s for standard SIM card size. There is a plastic cover on the slot, user have to pull the cover out and then insert the SIM card.

Control

The settings control of the Huawei B315 router could be done via the Web-interface (http://192.168.8.1 address) and mobile application. The WEB-interface, everything is pretty standard, and user can select the network mode manually, there is 4G-LTE, 3G and 2G variants provided. On the main page and in the status bar (top right) shows the type of Internet connection, which is currently running a router and distributes online consumers.

Huawei B315 web interface

In the Statistics page, the traffic consumed via the mobile network is correctly displayed. Unfortunately, there is no settings for daily traffic accounting, only for the period of one month. The router can “broadcast on the air” to 4 SSID at the same time, enabled by default one.

Work with external antennas can be flexibly adjusted using one external + internal, two external or two internal. By default, the internal antenna, so just connect external will not change anything; do not forget to change the settings to external in the WEB-interface. User can also run the latest version of HiLink under Android. In principle, the functionality of the application is enough in most cases. Send and read incoming SMS through it is too comfortable.

It’s declared by the manufacturer that the Wi-Fi coverage range is up to 250 meters. But manufacturers say a lot of things, but in practice conditions are always far from ideal. Switching from a wired connection to the cellular network and vice versa automatically works out for 2-3 seconds. The default priority is given to the wired connection settings.

Voice calls (incoming and outgoing) in the LTE network are also normal (CSFB). It’s promised in the next software update, the support for VoLTE will be supported.

Summary

The Huawei B315 4G Router is a common LTE wireless gateway and no special feature. But it’s a decent wireless router for home or small office. And it’s enough for daily usage. If you want 4G Router with higher configuration, you may check Huawei E5186 Router LTE Cat6 router or ASUS 4G-AC55U LTE Router.

Huawei E5180 LTE WiFi Router Overview

You may be familiar with the Huawei LTE routers; Unlike other 4G Routers, Huawei E5180 is in a special but nice appearance. The device is called the LTE CPE E5180. It works well with all the network operators in Europe and Asia. And there is an Ethernet-connector in the Huawei E5180, and it is possible to connect VoIP-device easily.

Huawei E5180 4G LTE CPE Specifications
GSM Standards	GPRS, EDGE
Data transmission 3G	HSDPA, HSPA+, HSUPA
4G Data Transfer	LTE to 150 Mbit/s
Receiving / sending SMS	Yes
LTE Standards	FDD: Band 1, 3, 7, 8, 20 (2600/2100/1800/900/800 MHz), TDD: Band 38 (2600 MHz)
Compatible with 4G LTE operators	All Main Network Operators in Europe and Asia
Standard	802.11 b/g/n
type antenna	internal
The range of Wi-Fi frequencies	2.4 GHz
Number of connected Wi-Fi devices	32
Data protection	AES encryption, TKIP, WEP, WPA-PSK, WPA2-PSK
Ethernet Ports	1 × LAN
The firewall (firewall)	Yes
IP filter	Yes
DMZ	Yes
UPnP	Yes
NAT	Yes
DHCP-server	Yes
Support for IPv6	Yes
VoIP-adapter	There, SIP
The number of RJ-11 ports	1
Compatibility	Windows XP, Vista, 7, 8, 8.1, Mac OS X 10.7, 10.8, 10.9
Food	Adapter
dimensions	70 × 70 × 110 mm
The weight	250 g

Design, size, controls

At the beginning, I said that the most interesting thing in the router – it is the appearance, vaguely reminiscent of various things, for example, AirPort Time Capsule. The E5180 is in rectangular Hull form, with greatly smoothed edges. The upper part slightly recessed, and above it stands a large pedestal of frosted white. It has some functional and aesthetic burden: in the first case is a button and the second it is a light blue color. Button has a soft press and the average speed for using is very nice. A short press activates the backlight off, or, and long-term (more than three seconds) – Enables or disables the device itself. The ususal operation is quite convenient.

On one side of the Webcube body, two indicators are located. One on the above is responsible for the mobile network, and the second, just below is for the Wi-Fi network. The second is in blue, and the top is red (in 4G) or blue (in 2G/3G). The glow does not hit in the eye during the day but is quite noticeable at night.

On the reverse side, there are the standard Ethernet-connector and a RJ-11 port for connecting VoIP phones. At the bottom, there is a connector for power plug.

At the bottom of E5180 glued sticker with information about the key access to Wi-Fi network by default, given username and password, as well as the IP-address. In any case, I will write them here in case the sticker is removed or broken.

IP: 192.168.8.1
User: admin
Password: admin
SSID: Huawei-E5180-2DD0
Wi-Fi Key: L8J2A871E01 (likely to be different in different devices)

Blow the stick, there is a slot for microSIM-card. The slot is covered by a small plastic flap.

Above the lower platform rises a little rim of padded material similar to rubber. Overall, Huawei E5180 looks great in any interior. The only thing missing is a big angle LED screen. For example, the side indicator is not always clear whether the router is enabled or not, and it is unclear what kind of signal – 3G or 4G to be connected.

Using the E5180 Wi-Fi-router

First, you need to install the SIM card into slot with support for Internet. Next, connect the power cord to the device and plug the adapter into a power outlet. The duration of the initialization is about 30 seconds, not fast. To connect to the E5180, you need to find a WiFi SSID named Huawei-E5180-2DD0 and enter the key / password printed on the underside of the unit. In principle, now you can already use the internet.

After connected to wireless network, the signal reception quality is about the same as a portable router MR-100-2, that is not the best. If you are unsatisfied with the signal, an external antenna should be necessary now, so that the signal gains a little higher. We should also say that you cannot connect an external antenna. Usually, the network mode “jumps” from 3G to 4G and back. However, it is more dependent on how well the operator can “give” network, not on the E5180 router.

With regard to the WiFi coverage range, according to the manufacturer, it is about 250 meters along the line of sight. In practice, I can say that the E5180 is more powerful than Asus RT-N10P (bought only to test the functionality of Wi-Fi in the house). Huawei E5180 router distributes the Internet without problems in the apartment, even with the obstacles in front of him – two reinforced concrete walls.

The official site says that Huawei E5180 router can connect up to 32 devices. I did not have so much devices to real test, but a couple of laptops, three smartphones and a few other gadgets worked tolerably well in the network.

HUAWEI E5180 LTE CPE

For Huawei E5180 setup, you will need a special application and a smartphone or computer. If in the PC, everything is available on the IP 192.168.8.1 with login and password «admin». Below the screenshot of the WEB-version is for settings.

HUAWEI E5180

To configure settings using a smartphone or tablet, there is a free “Huawei HiLink” APP on Google Play. It is very simple and visually displays information about the network and router settings.

Conclusion

On the positive side, Huawei E5180 4G Router provides a cool, ergonomic design, and the operation on this router is very simple and easy. Another advantage is that the E5180 cube could work with all main European and Asia telecom operators in the fourth-generation network, and it’s easy setup. The only shortcomings should be the absence of the 5 GHz band for WiFi and missing of external antenna connector. For most users, the Huawei E5180 is good enough for common daily use.

Huawei CarFi E8377 Bring Internet in a Car

Permanent access to the internet in the car is sometimes useful. Of course, if you ride alone, and you are using only a smartphone, then just turn off the mobile data and no any trouble. Sometimes, however, it is not enough to have only mobile data from smartphone.

A good example is a longer trip with your family or a business trip with colleagues. Then plain hotspot on your smartphone may not be enough. Firstly, because it does not always provide the appropriate connection speed to several people at the same time, and secondly because the burden on smartphone.

Therefore it comes the new gadget Huawei CarFi – small WiFi router, which need to put the SIM card and connect to the cigarette lighter socket in the car. The Huawei CarFi connects to the fast 4G LTE mobile network and Internet broadcasts up to 10 people at once. It is therefore suitable both for use in typical passenger cars and busses. Users can connect a couple of laptops, tablets, and even (if necessary) smartphones wirelessly.

Huawei CarFi (E8377) is a small router, consisting of a plug into the car’s 12 V and an upper part, enlarged section in which there is a push button switch, antenna connector and of course a slot for a SIM card.

On the leg there is a sticker with the Network ID and the default password. User should take a picture to save, because the sticker is easy to damage. In addition, there are two stickers with the name and password, which are glued. Under the cap at the top part, with the slot, there is a small connector for an optional external antenna. It is optional but can be useful at a time when we are trying to connect to faster cellular network in an area of weak coverage.

At the top of the side, a USB output port is built-in. It could be connect to an ordinary USB cable and charge the smartphone. In practice, Huawei CarFi is not only a router, but also a car charger.

Configuration and operation

The setup process is very simple. After inserting the SIM card and placing the router in the slot 12 V, user only need to hold down the button on the top and the Huawei CarFi turns on. Now your smartphone searches the network created by the WiFi router and connects to it after stating the default password.

Theoretically we can keep longer use Internet connectivity from now, but definitely recommend installing the program Huawei HiLink on your smartphone. Download it free from Google Play (Android) and the App Store (iOS). The WiFi name and password can be changed in the future in the HiLink application settings.

The main task of the application on the smartphone is not only changing the settings. Other management could also be done when connected to the Huawei CarFi, and user can control the consumption of a data packet.

When we checked the data rate in the big city, we can gain typically 30-35 Mb/s. Even if we divide the speed on several devices, it will still be able to use the Internet easily, such as check email, use Google calendar, work on documents in the cloud and send & receive small files. The connection was stable. There I had not met with cases of disconnecting one of the CarFi E8377.

Summary

Huawei CarFi was doing a positive test. First of all, it was very easy to install and use (management from a smartphone). Secondly, you can connect up to 10 different devices at the same time to use them from the Internet. Thirdly, featured router is not a big financial expenditure, and may prove to be very useful during a business trip (work in a car) or a long trip with friends and family. If you drive often in the car with a few people and your car does not have its own WiFi router, the Huawei CarFi is recommendable.

Final assessment:

* fast 4G LTE Mobile Communications

* WiFi hotspot, the ability to connect up to 10 devices simultaneously

* stable operation

* built-in USB port for charging smartphones

* very simple setup and operation

* operation via smartphone (application HiLink)

* the ability to connect an additional antenna

Buying Huawei CarFi router is most cost-effective when the car will be benefited for a few people (some devices) at the same time. Therefore, a good idea is to buy a large package of data plan on the mobile phone number. With an average, load should be at least 10 GB per month, and at a higher 25 GB or more. The cost of purchasing the router is not very big. You can buy the Huawei CarFi E8377 from www.4gltemall.com at good price now.

Huawei B315 4G LTE Router Review

The Huawei B315 is a new LTE router available in Germany since summer 2015. The device has a wide range of functions and has a modern equipment with Gigabit LAN, fast wireless, telephone and of course a good cellular modem. With a comparative price without contract, the Huawei B315 is also relatively cheap to have.

Compact body with many connections

The Huawei B315 is packed in a simple cardboard box and is available in either black or white color. In addition to the router, a power supply with a 1.5 m long connecting cable and a short Ethernet cable (about 0.5 m) is included, and there is of course a printed quick-start guide. If you look at the router in more detail on, it is noticeable that it is trapezoidal in shape: Below the router is a bit thicker and thus has a secure stand on level ground, on the above the width narrows rapidly. All antennas were installed inside, thus there are no ugly antenna stub. On the front, Huawei has installed five LED indicators for the operational status. In addition, a small and discreet manufacturer logo adorns the front. All major ports are placed on the back. There are four RJ45 Gigabit Ethernet ports, one RJ11 phone connector, a USB 2.0 port and a reset button. Besides the reset button is the connector for the power supply and two SMA connectors for an external antenna can be found under a cover. The SIM card is set on the side of B315 router, the shaft itself is protected by a cover and is very easily accessible.

The establishment and operation of the Huawei B315 proved very easy. The router works with any SIM card and recognizes the provider automatically. Of course, you can access data later but also adjust manually. After inserting the SIM card, user must connect to the Huawei B315 either via a LAN cable or wirelessly via WLAN. The wireless network is encrypted, and the corresponding password and wireless network name can be found at the bottom of the router. Both the password and the wireless network name should be changed later to further increase security. If the SIM card has no PIN code, the router will be connected just in a few seconds after plugging the power adapter to the Internet. Otherwise, you must first through the web interface, which is called with the IP address 192.168.1.254, enter the PIN code. All in all, the start made extremely simple and requires no extensive computer knowledge, so the Huawei B315 is recommended for beginners.

LTE with up to 150 Mbit/s

The Huawei B315 has an integrated cellular modem for 4G/LTE, 3G/UMTS and 2G/GSM, so for all major technologies in Europe. The supported frequency bands allow use with any providers in many other countries in Asia and Middle East. The Huawei B315 router not only supports the important frequency ranges around 800, 1800, and 2600 MHz, but also the 900 and 2100 MHz. The maximum speed could reach up to 150 Mbit/s downstream and 50 Mbit/s upstream ( LTE category 4 ) on LTE network. If only the UMTS network is available or no LTE network available, up to 42.2 Mbit/s downstream and 5.76 Mbit/s upload speeds are possible in the UMTS network with the data accelerator DC-HSPA+ used. As mentioned above, the Huawei B315 also permits connection of an external antenna. In the test with a LTE MIMO antenna, the speed and the stability of the compound could be increased significantly with the internal antenna.

Home network with Gigabit LAN

Besides a fast Internet connection, the Huawei B315 LTE router also offers comprehensive functions for home networking. Thus, up to four devices to be connected via cable to the router. The maximum data transmission (speed) is then up to 1 gigabit, so around 1000 Mbit/s. About WLAN up to 32 devices are also possible at the same, but then the maximum data rate is 300 Mbit/s, well below the level via cable.

The USB 2.0 port on the back is not intended for connecting a computer, but can be used for connecting storage devices such as an external hard drive or a USB memory stick. Important to know: The memory should be formatted to FAT32, which often spread external hard drives; NTFS format is not recognized by Huawei B315. In addition, the USB port is suitable for the integration of a printer in the network, this only needs to support the Samba protocol. An HD video on a USB stick connected to the Huawei B315 could be streamed easily to a TV, jerkiness or delays did not exist and the router performance was so good that several devices could be surfing the Internet simultaneously.

Huawei B315 Antenna

Telephone over cellular

The Huawei B315 can be used as needed for telephone. So you can plug in at the back only an analog telephone with RJ11 connector. The DECT function for connecting wireless phones has been waived by manufacturer Huawei, so that one is forced to use the RJ11 connector. Another drawback: The telephone is only over cellular and Voice over IP (VoIP) is not supported. Many data-rates offer no telephone function or only with very expensive minute rates, so that the phone function on Huawei B315 for most users is likely to be useless.

Conclusion: LTE router with good facilities

Looking at the whole package, the Huawei B315 has a compelling features, easy setup and good performance. In the test, besides the classic functions, the Huawei B315 is well suited for families and households with multiple users. However, If you prefer to LTE router with the latest technology, you may check Huawei E5186 4G Router.

How to Setup Huawei E5186 4G router for Network Connection

Start by inserting your SIM card and connect the power adapter to the Huawei E5186 router. The SIM card must be inserted into the bottom of the router. The power adapter should connect to the back of the router.
You must connect the router to your computer via the wireless network (Wi-Fi). You will find the router’s name and network code on the label which is printed at the back of the router.
Once connected, open your internet browser (eg Internet Explorer or Safari) and in the address bar, type the router’s address http://192.168.8.1. Go to the address.
Select the tab “Settings” and log on. The username is admin and the password is admin. You can also find both the router’s address, user name and password on the label in the router.
The router will ask you to change your password when you log in. Skip this since your router is already ensured with a unique network code that you entered earlier in order to connect to the router. Close the message.
Select the tab to the left called Quick Setup. You will now be guided through the setup of your router.
Once you have completed the quick setup, the Huawei E5186 router will be connected with the internet for surfing on the web.

If you want to know more details about the Huawei E5186, welcome to check here: http://www.4gltemall.com/huawei-e5186-4g-cat6-802-11ac-lte-cpe.html

Huawei 4G WiFi Cube E5180 Review

The telecom company “3” has introduced the Huawei E5180 4G mobile broadband router into the company’s product line, and now we have the new smart 4G router available.

The first thing you notice is the size. The entire dimensions of Huawei E5180 are 110 x 70 x 70 mm, not much bigger than a coffee mug, and on top, the router has a beautiful soft blue LED light that indicates that the router is turned on.

If the blue light is annoying, the E5180 4G WiFi Cube can be disconnected from the options menu, or simply by pressing down on the top of the router. Possibility to switch off the light is a welcome feature, since the blue light can be irritating.

Compared to some larger mobile broadband routers, it seems Huawei E5180 is elegant. On the front, there are two small blue LED light that indicates when the router has the connection to the mobile network and when there is Wi-Fi connection.

On the back of the Huawei E5180 Cube, there is an Ethernet port, a PSTN (phone) port and a plug for the power supply. The external power supply is white with white cord, and fits well with the small little beautiful router. You can install the SIM card at the bottom of the router. Also a flat Ethernet cable is included in the sales package, and this is also white.

Technically, there is a Category 4 LTE modem supporting speeds up to 150 Mbit/s in 4G LTE and DC-HSPA+ up to 42 Mbit/s over 3G. The Huawei WiFi 4G Cube router supports the 4G FD-LTE on 800, 1800, 2100 and 2600 MHz. During our test, the Cube E5180 router showed the fine reception on 3’s 4G network.

Wi-Fi connection is at 2.4 GHz, and the router supports 802.11 b/g/n standards. N standard runs with MIMO 2 × 2, and according to the sales package, the Huawei Cube E5180 could cover up to 250 meters – this part could not quite be confirmed, but the range of Wi-Fi signal was quite acceptable. The Huawei WiFi Cube E5180 supports up to 32 connected Wi-Fi devices simultaneously.

The router has only Wi-Fi 2.4 GHz, and it is not possible to choose whether the router must use Wi-Fi B, G or N standard. The router uses all three standards, and it can not change.

However, it is possible that user can make four separate SSIDs (separate Wi-Fi network), but you can’t setup more advanced things such as bandwidth-limitation of the additional SSIDs. You can set up a SIP account if you wish to use the router PSTN jack to connect a landline phone on the router, and use it for Voice over IP telephone.

There is no possibility of connecting external antenna to this 4G WiFi Cube, so you must use the Huawei E5180 far from the nearest cell tower. The rate has been acceptable throughout the test.

Small, light and elegant

Two words can summarize Huawei E5180 could be “very good”. The Huawei 4G WiFi Cube is not designed to be an all-round solution like many of the other mobile broadband routers on the market. The E5180 router is designed to be small and elegant, and so easy to install that you basically only need to insert a SIM card. The router is nice and easy to use in everyday life. Huawei E5180 is an exciting 4G LTE router that fits perfectly in the frame. Good performance, easy to get started and fine speed. Huawei E5180 does really well.

Huawei E5186 4G LTE Router Test

Huawei E5186s is the name of the Chinese producer’s latest mobile broadband router on the Danish market, and the telecommunications company “3” has introduced the E5186 router into their range as the router perfectly fits 3s network. The router can support Carrier Aggregation, which the phone company uses to achieve speeds of about 140 to 150 Mbit/s.

The features on Huawei E5186 router:

3G/4G LTE router with carrier aggregation
4G LTE Category 6 router option to download up to 300 Mbit/s
Wi-Fi b/g/n/ac both on the 2.4GHz and 5 GHz
4 Ethernet ports
USB port for sharing files
Antenna connector for external antenna.

Mobile broadband routers usually include not only the most basic set, and is by no means at the forefront compared to normal home routers, so this must be kept in mind to have a little quick look at the router’s functions.

The start-up of the Huawei E5186 router is very easy. You put the Sim card in, turn on the router and the name of the wireless network and the password are behind the router. So you can access the internet in two minutes.

The router is kept in white color, fit perfectly into most homes. Somebody may not exactly love the router’s blue twinkling lights. It should be mentioned that the included black power adapter is just as ugly as all other black power supplies that are currently provided in electronic products.

How Huawei E5186 router works

The first thing you notice is that the E5186 router’s configuration to be accessed via the address 192.168.8.1, which is slightly different than most other routers in the consumer market. Next, you will be presented with a login window where you see the router’s current status without having to login to.

On the statistics, you can see the statistics of one’s consumption of data. The statistics are not just useful for much, but it gives an opportunity to follow one’s consumption, although it is somewhat unclear how the statistics are generated.

It is possible to update the router software on page “update”. The software update can be performed locally via USB or downloaded online.

Many advanced options

The real fun options are listed in the settings where all the huawei E5186 router important settings hiding. Here you can change the name of the Wi-Fi network individually on both the 2.4 and 5 GHz. Unfortunately no possibility to make a guest network.

On the other hand, there are plenty of other very advanced features such as to setup a SIP server, which you use to certain types of IP telephone. The router is equipped with two phone ports, so it is possible to use the Huawei E5186 router to the IP phone. But this part, we have not tested.

It is also possible to block access to certain websites directly in the router – eg. block access to Facebook or YouTube. You simply enter the address of the web sites you do not want users to be able to access via the browser, and so prevents the router access to the site, which is quite useful if teenage daughter spend too much time on Facebook.

Finally, it is also possible to share the contents of a hard drive or a printer respectively via DLNA and Samba over the LAN. DLNA function serving as expected, and it is possible to stream video, view photos or play music. The setup of samba function caused not so many problems.

LED light shines like a beacon

The most important thing about the Huawei E5186 router is enough for daily use where you do not have to play with the functions in the menu, the router would be running rock-stable. Even with sometimes up to 14 Wi-Fi devices connected, Huawei E5186 LTE router drove stable, and there was absolutely no trouble keeping Wi-Fi connection itself far from the router. It is really convenient to be able to choose Wi-Fi at 5 GHz, when many residential areas have too many Wi-Fi network at 2.4 GHz, which creates noise and resulting low throughput of Wi-Fi.

Huawei E5186 4G router is also equipped with two connectors for external antennas. The router’s antennas are quite sensitive, and during the test, no trouble keeping the connection to the 3’s 4G LTE network. If you live far from the nearest cell tower or in an unfortunate area, so it is possible to connect an external antenna. You can use below the external antenna with two connectors to improve the signal strength. You may refer to below the link to buy the external antenna for Huawei E5186 Router: http://www.4gltemall.com/4g-antenna-two-ts-9-connector.html

The only really big complaint about Huawei E5186 router is the exceptionally bright LED lights on the router’s front – LED light shines just like a lighthouse. User should not put the router in the bedroom if you are planning to get some sleep during the night, and there should be a configuration option to turn down the strong light.

Overall, Huawei E5186s router is a quite fine and sensible 4G router. It was no connection problems under the little mini-test, and the router did its good job for 12 terminals. If you are planning to buy a future proof router with good stable performance, Huawei E5186 4G LTE wireless router is recommended.