Category: HUAWEI 4G LTE CPE/Router

Huawei B618 Connection Settings

Connection

To use the Huawei B618 to access the Internet, you must create a network profile or set the default network profile and operator’s network.

  • Creating a Network Profile
    If you are using theHuawei B618 Router for the first time, you must create a network profile to access the Internet.
  • Setting the Default Network Profile
    After you set the default profile, theHuawei B618 Router accesses the Internet via the default operator’s network.
  • Setting the Operator’s Network
    After configuring the settings, theHuawei B618 Router can quickly find networks.
  • Accessing the Internet Using the Cellular Data Network
    Use the following method to connect theHuawei B618 Router to the Internet.
  • Accessing the Internet Using an Ethernet Connection
    Configure Ethernet connection settings the first time theHuawei B618 Router connects to the Internet using an Ethernet connection.
  • Connecting Clients to theHuawei B618 Router over a WLAN
    After WLAN is enabled on the Huawei B618 Router, clients can connect to the Huawei B618 Router and access the Internet using it.
  • Viewing the Clients Connected
    Check the number of clients connected to theHuawei B618 Router and their details.
  • Adding a Client to the Blacklist
    On theHuawei B618 Router‘s web management page, you can add unwanted clients connected to the Huawei B618 Router to the blacklist to better secure the Wi-Fi network.

 

——————————————————————————————————————– 

 

 

Creating a Network Profile

If you are using the Huawei B618 Router for the first time, you must create a network profile to access the Internet.

Procedure

  1. Choose Settings> Dial-up > Profile Management .
  2. Click New Profile.
  3. Set the profile-associated parameters.

 NOTE:

  • The value of Profile namecan contain a maximum of 20 characters, including the following: 0-9, a-z, A-Z, blank space, and ! # $ ( ) * – . / = @ [ ] ^ _ { } ~ | , ; \ % + ?
  • Contact your service provider for detailed parameter settings.
  1. Click Save.

 

 

Setting the Default Network Profile

After you set the default profile, the Huawei B618 Router accesses the Internet via the default operator’s network.

Procedure

  1. Choose Settings> Dial-up > Profile Management .
  2. From the Profile namedrop-down list, select a network profile.
  3. Click Apply.

 

 

Setting the Operator’s Network

After configuring the settings, the Huawei B618 Router can quickly find networks.

  • Selecting the Operator’s Network Type
    Select your operator’s network type to find and log in to the network quickly.
  • Searching for and Registering with a Network
    The Huawei B618 Routersupports both automatic and manual network registration.

 

Selecting the Operator’s Network Type

Select your operator’s network type to find and log in to the network quickly.

Context

For details about your network type, contact your operator.

Procedure

  1. Choose Settings> Dial-up > Network Settings.
  2. From Preferred mode, select a mode.
  3. Click Apply.

 

Searching for and Registering with a Network

The Huawei B618 Router supports both automatic and manual network registration.

Procedure

  1. Choose Settings> Dial-up > Network Settings.
  2. From Mode, select a mode.
    • Auto: The Huawei B618 Routersearches for an available network and registers with the network automatically.
    • Manual: You need to search for an available network and register with it manually.
  3. Register with a network.
    • In Automode, click Apply.
    • In Manualmode, select one of the networks found and click OK.

 

 

Accessing the Internet Using the Cellular Data Network

Use the following method to connect the Huawei B618 Router to the Internet.

Procedure

  1. Choose Settings> Dial-up > Connect .
  2. Click On.
  3. Connect to the Internet.

 NOTE:

  • By default, Huawei B618 Routerconnect to the Internet automatically.
  • You can enable or disable the data roaming function.

 

 

Accessing the Internet Using an Ethernet Connection

Configure Ethernet connection settings the first time the Huawei B618 Router connects to the Internet using an Ethernet connection.

Procedure

  1. Using a network cable, connect the Huawei B618 Routerto a router’s WAN port or the Ethernet port on a wall.
  2. Set Ethernet parameters according to Setting Up the Ethernet Connection Mode.

 

 

Setting Up the Ethernet Connection Mode

This section describes how to set up the Ethernet connection mode and parameters.

Procedure

  1. Choose Settings> Ethernet > Ethernet Settings.
  2. Set the Huawei B618 Router‘s connection parameters according to the following table.
Application Scenario Configuration Method
The Huawei B618 Router selects the best network access mode based on the network environment. a.       Select Auto from the Connection mode drop-down list.

b.       Set Point-to-Point Protocol over Ethernet (PPPoE) and dynamic IP parameters. For details, see PPPoE Dial-up Settings and Dynamic IP Settings.
Access the Internet using a PPPoE dial-up connection or a dynamic IP address. c.       Select PPPoE + Dynamic IP from the Connection mode drop-down list.

d.       Set Point-to-Point Protocol over Ethernet (PPPoE) and dynamic IP parameters. For details, see PPPoE Dial-up Settings and Dynamic IP Settings.
You have the user name and password provided by your network service provider for the PPPoE dial-up connection. e.       Select PPPoE from the Connection mode drop-down list.

f.        Enter the user name and password provided by your network service provider.

g.       Set the MTU.
The computer IP address is automatically assigned by the network service provider. h.       Select Dynamic IP from the Connection mode drop-down list.

i.         Select the Set DNS server manually check box, Enter Primary DNS server and Secondary DNS server.

NOTE:

This step is optional. By default, the Huawei B618 Router automatically obtains the Domain Name Server (DNS) address.

j.         Set the MTU.
You have the network parameters, such as a fixed IP address, subnet mask, gateway IP address, and domain name server (DNS) address, provided by your network service provider. k.       Select Static IP from the Connection mode drop-down list.

l.         Enter the IP address, subnet mask, gateway address, DNS address (optional), provided by your network service provider.

m.     Set the MTU.
The client is connected with a network cable, but no Ethernet connection is available. Select LAN only from the Connection mode drop-down list.

NOTE:

You can also unplug the network cable and access the Internet using the cellular data network.
  1. Click Apply.

 

 

Connecting Clients to the Mobile Broadband over a WLAN

After WLAN is enabled on the Huawei B618 Router, clients can connect to the Huawei B618 Router and access the Internet using it.

Prerequisite

The Huawei B618 Router is connected to the Internet.

Procedure

  1. Choose Settings> WLAN > WLAN Basic Settings .
  2. View the default value of SSID.

 NOTE:

  1. Enter SSIDon clients.

After connecting to the Huawei B618 Router, clients can access the Internet using the Huawei B618 Router.

 

Changing the SSID

This section describes how to change the service set identifier (SSID).

Procedure

  1. Choose Settings> WLAN > WLAN Basic Settings .
  2. From the SSID list, choose the SSID you want to change, and click Edit.
  3. In SSID, enter the SSID.
  4. Click Apply.

 

 

Setting the WLAN Key

To improve the security of the wireless local area network (WLAN), set a security key for the WLAN.

Procedure

  1. Choose Settings> WLAN > WLAN Basic Settings .
  2. From the SSID list, choose the SSID you want to change, and click Edit.
  3. Select Security mode.
    • None(open): No encryption. No security key is required when clients access the WLAN.

 NOTE:

For daily use, it is recommended that you set a security key, to improve the security performance of a WLAN.

  • WEP: This stands for Wired Equivalent Privacy.
  • WPA2-PSK: This is the second version of WPA-PSK and is more secure than WPA-PSK.
  • WPA/WPA2-PSK: Both WPA-PSKand WPA2-PSK encryption modes are supported. Clients can access the WLAN in WPA-PSK or WPA2-PSK
  1. Enter a security key.

 NOTE:

Select Show password to view the security key that you have entered.

  1. Click Apply.

Setting a WPA Security Key for the WLAN

  1. From Security mode, select WPA2-PSK.
  2. In WLAN key, enter the security key. For example, 12345678.
  3. Click Apply.

 

Enabling or Disabling the SSID Broadcast

If the service set identifier (SSID) broadcast function is enabled, the Huawei B618 Router broadcasts the SSID of the wireless local area network (WLAN) facilitating clients’ access to the WLAN. The disadvantage is that unauthorized clients can also access the WLAN. If the SSID broadcast is disabled, the Huawei B618 Router does not broadcast the SSID of the WLAN. So the SSID must be entered manually and correctly from a client before the client accesses the WLAN. This improves the security of the WLAN.

Procedure

  1. Choose Settings> WLAN > WLAN Basic Settings .
  2. From the SSID list, choose the SSID you want to change, and click Edit.
  3. Set SSID broadcast.
    • Enable: to enable the SSID broadcast.
    • Disable: to disable the SSID broadcast.
  4. Click Apply.

 NOTE:

During the process of setting up the WLAN, you can set the SSID broadcast to Enable to facilitate the access from clients. After the WLAN is set up, set the SSID broadcast to Disable to improve the security of the WLAN.

 

 

 

 

Viewing the Clients Connected

Check the number of clients connected to the Huawei B618 Router and their details.

Procedure

  1. Choose Settings> Security > Device Management.
  2. Under Connected WLAN clients, view the clients connected to the Huawei B618 Router.

 

 

 

 

Adding a Client to the Blacklist

On the Huawei B618 Router‘s web management page, you can add unwanted clients connected to the Huawei B618 Router to the blacklist to better secure the Wi-Fi network.

Procedure

  1. Choose Settings> Security > Device Management.
  2. Under Connected WLAN clients, check the information about clients connected to the Huawei B618.
  3. Find the client you want to add to the blacklist, and click Block to display the Confirm dialog box.
  4. Click OK.

 NOTE:

  • Under Blacklist, view all clients on the blacklist.
  • To remove a client from the blacklist, click Delete under Blacklist.

 

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html

Huawei B618 Setting up a VPN Connection

A virtual private network (VPN) is a private network set up across a public network. A VPN adopts security technologies such as encryption and identity verification to guarantee the privacy and security of your data communications. For example, if you need to access your company’s intranet, you can set up a VPN connection with your company’s VPN server. This will allow you to access the intranet resources of your company without actually going to the office, but is as secure and convenient as using the intranet in the office.

Procedure

  1. Choose Settings> VPN.
  2. Select and enable an access type.
  3. Set the VPN parameters.
L2TP VPN client The Layer 2 Tunneling Protocol (L2TP) is a virtual tunneling protocol usually used in virtual private networks. If the VPN server uses the L2TP, you can set the L2TP function of Huawei B618 Router to set up a connection between the VPN server and your computer.

The LNS address, tunneling password, PPP user name, and PPP password for the configuration are provided by your VPN server supplier.

·         Host Name: Enter the customized Huawei B618 Router name. The VPN server uses the identification name to identify the connected host.

·         Handshake interval (s): After a VPN connection is set up, Huawei B618 Router will regularly send status reports to the VPN server based on time intervals. If the VPN server hasn’t received any status reports for a long time, the VPN will be disconnected.
PPTP VPN client The Point-to-Point Tunneling Protocol (PPTP) is a new enhanced security protocol developed based on the PPP. The PPTP supports multi-protocol virtual private networks and is able to enhance security through Password Authentication Protocol (PAP) and Extensible Authentication Protocol (EAP). Remote users can dial up to access the ISP and securely access their company’s network through the Internet.

The dial-up server address, user name, and password for the configuration are provided by your VPN server supplier.
  1. Click Apply.

 

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html

Huawei B618 Sharing Files Using the DLNA Function

Sharing Files Using the DLNA Function

After the DLNA is enabled, you can access the media files shared from a mobile storage device (such as an SD card) that is connected to the Huawei B618 4G Router over another device that supports the DLNA.

Procedure

  1. Choose More> Sharing > DLNA.
  2. Select Enable to enable the DLNA function.
  3. Click Select. In the displayed Select Folder dialog box, specify the file sharing path.
  4. Click OK to close the dialog box.
  5. Click Apply.

 NOTE:

If you want to share all files in the mobile storage device, set the Directory to All.

 

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html

Huawei B618 PIN Management

PIN Management

PIN Management provides PIN security settings to prevent unauthorized use of the SIM, USIM, or UIM card.

 

Turning On or Off PIN Verification

If PIN verification is turned on, you need to enter the PIN only when the Huawei B618 4G Router is turned on. If PIN verification is turned off, no PIN is required.

Context

  • If a PIN is required, enter the correct PIN.
  • If you enter your PIN incorrectly three times consecutively, the SIM/USIM/UIM card is locked and you must enter the PIN unlock key (PUK).
  • If you enter the PUK incorrectly ten times consecutively, the SIM/USIM/UIM card is locked permanently. If you cannot enter the correct PIN or PUK, network-associated functions are unavailable.
  • The PIN and the PUK are provided with the SIM/USIM/UIM card. If you did not receive them or have forgotten them, contact the operator.

Procedure

  1. Choose Settings> Security > PIN Management .
  2. From PIN operation, select:
    • Enable: to turn on PIN verification.
    • Disable: to turn off PIN verification.
  3. Enter the correct PIN.
  4. Click Apply.

 

 

 

Changing the PIN

If PIN verification is turned on, you can change the PIN.

Procedure

  1. Choose Settings> Security > PIN Management.
  2. From PIN operation, select Modify.
  3. Enter the current PIN.
  4. Enter a new PIN and confirm the PIN.
  5. Click Apply.

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html

Huawei B618 Ethernet Settings

Setting Up the Ethernet Connection Mode

This section describes how to set up the Ethernet connection mode and parameters.

Procedure

  1. Choose Settings> Ethernet > Ethernet Settings.
  2. Set the Huawei B618 4G Router‘s connection parameters according to the following table.
Application Scenario Configuration Method
The Huawei B618 selects the best network access mode based on the network environment. a.       Select Auto from the Connection mode drop-down list.

b.      Set Point-to-Point Protocol over Ethernet (PPPoE) and dynamic IP parameters. For details, see PPPoE Dial-up Settings and Dynamic IP Settings.
Access the Internet using a PPPoE dial-up connection or a dynamic IP address. c.       Select PPPoE + Dynamic IP from the Connection mode drop-down list.

d.      Set Point-to-Point Protocol over Ethernet (PPPoE) and dynamic IP parameters. For details, see PPPoE Dial-up Settings and Dynamic IP Settings.
You have the user name and password provided by your network service provider for the PPPoE dial-up connection. e.       Select PPPoE from the Connection mode drop-down list.

f.       Enter the user name and password provided by your network service provider.

g.      Set the MTU.
The computer IP address is automatically assigned by the network service provider. h.      Select Dynamic IP from the Connection mode drop-down list.

i.        Select the Set DNS server manually check box, Enter Primary DNS server and Secondary DNS server.

NOTE:

This step is optional. By default, the Mobile Broadband automatically obtains the Domain Name Server (DNS) address.

j.        Set the MTU.
You have the network parameters, such as a fixed IP address, subnet mask, gateway IP address, and domain name server (DNS) address, provided by your network service provider. k.      Select Static IP from the Connection mode drop-down list.

l.        Enter the IP address, subnet mask, gateway address, DNS address (optional), provided by your network service provider.

m.    Set the MTU.
The client is connected with a network cable, but no Ethernet connection is available. Select LAN only from the Connection mode drop-down list.

NOTE:

You can also unplug the network cable and access the Internet using the cellular data network.
  1. Click Apply.

 

———————————————————-

 

Viewing Ethernet Connection Information

This section describes how to view Ethernet connection information.

Procedure

  1. Choose Settings> Ethernet > Ethernet Status.
  2. View Ethernet connection information.

 

———————————————————-

 

MAC Address Clone

Using the Media Access Control (MAC) address clone function, multiple clients can concurrently connect to the Huawei B618 LTE CPE to access the Internet.

Procedure

  1. Choose Settings> Ethernet > MAC Clone.
  2. Click Cloneto set the MAC address of the Huawei B618 LTE CPE Ethernet port to that of your computer, or enter the MAC address to be cloned in the MAC address field.
  3. Click Apply.

 NOTE:

Click Reset to restore the MAC address of the Ethernet port to its default value.

 

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html

Huawei B618 WLAN Settings

Huawei B618 WLAN Settings

  • Enabling or Disabling WLAN
    This section describes how to enable or disable Huawei B618 Router‘s WLAN.

Procedure

  1. Choose Settings> WLAN > WLAN Basic Settings .
  2. From WLAN module,select:
    • Enable: Enable WLAN
    • Disable: Disable WLAN

 

  • Setting the SSID of the WLAN
    The service set identifier (SSID) is a name that identifies a wireless local area network (WLAN). A wireless client (for example, a computer) can communicate with the Huawei B618 properly only when they are using the same SSID. To ensure the WLAN security, do not use the default SSID. You can define an SSID as required.
  • Changing the SSID
    This section describes how to change the service set identifier (SSID).

Procedure

  • Choose Settings > WLAN > WLAN Basic Settings .
  • From the SSID list, choose the SSID you want to change, and click Edit.
  • In SSID, enter the SSID.
  • Click Apply.

 

  • Enabling or Disabling the SSID Broadcast
    If the service set identifier (SSID) broadcast function is enabled, the Huawei B618 broadcasts the SSID of the wireless local area network (WLAN) facilitating clients’ access to the WLAN. The disadvantage is that unauthorized clients can also access the WLAN. If the SSID broadcast is disabled, the Huawei B618 does not broadcast the SSID of the WLAN. So the SSID must be entered manually and correctly from a client before the client accesses the WLAN. This improves the security of the WLAN.

Procedure

  1. Choose Settings> WLAN > WLAN Basic Settings .
  2. From the SSID list, choose the SSID you want to change, and click Edit.
  3. Set SSID broadcast.
    • Enable: to enable the SSID broadcast.
    • Disable: to disable the SSID broadcast.
  4. Click Apply.

 NOTE:

During the process of setting up the WLAN, you can set the SSID broadcast to Enable to facilitate the access from clients. After the WLAN is set up, set the SSID broadcast to Disable to improve the security of the WLAN.

 

 

 

  • Setting the WLAN Key
    To improve the security of the wireless local area network (WLAN), set a security key for the WLAN.

Procedure

  1. Choose Settings> WLAN > WLAN Basic Settings .
  2. From the SSID list, choose the SSID you want to change, and click Edit.
  3. Select Security mode.
    • None(open): No encryption. No security key is required when clients access the WLAN.

 NOTE:

For daily use, it is recommended that you set a security key, to improve the security performance of a WLAN.

  • WEP: This stands for Wired Equivalent Privacy.
  • WPA2-PSK: This is the second version of WPA-PSK and is more secure than WPA-PSK.
  • WPA/WPA2-PSK: Both WPA-PSK and WPA2-PSK encryption modes are supported. Clients can access the WLAN in WPA-PSK or WPA2-PSK
  1. Enter a security key.

 NOTE:

Select Show password to view the security key that you have entered.

  1. Click Apply.

Setting a WPA Security Key for the WLAN

  1. From Security mode, select WPA2-PSK.
  2. In WLAN key, enter the security key. For example, 12345678.
  3. Click Apply.

 

 

 

  • Selecting a Channel
    This section describes how to select a channel.

Procedure

  1. Choose Settings> WLAN > WLAN Advanced Settings.
  2. Select a channel from the Channel drop-down list box.
  3. Click Apply.

 NOTE:

If you do not know which channel to select, select Auto. The Huawei B618 4G Router will then automatically select a channel.

 

 

  • WPS
  • The Wi-Fi Protected Setup (WPS) is a standard used to set up wireless connections in an easy and secure way. Traditionally speaking, to set up a wireless connection, you have to set a WLAN name (SSID) and key for the Huawei B618, and enter the key on the client. WPS automatically configures an SSID and key for the Huawei B618 4G Router and client. You can conveniently and securely connect your client to the WLAN without having to remember the SSID and key.

Connecting a Client to the Mobile Broadband Through PIN

In Personal Information Number (PIN) mode, you can securely connect a client to the Huawei B618 4G Router ‘s WLAN by simply entering the client’s PIN on the Huawei B618 4G Router ‘s web management page. You can then access the Internet through the Huawei B618 4G Router.

Procedure

  1. Set the client’s WPS connection method to PIN, and record the PIN displayed on the client.

 NOTE:

For details about operations on the client, see the client’s user guide.

  1. On the Huawei B618‘s web management page, choose Settings> WLAN > WPS Settings .

 NOTE:

By default, WPS is set to On. If WPS is set to Off, WPS connection mode cannot be set.

  1. Choose Enter device PIN.
  2. Enter the client’s PIN in the PINtext box.
  3. Click Connect.

 

 

  • Connecting a Client to the Mobile Broadband Through PBC

In Push Button Configuration (PBC) mode, you can connect a client to the Huawei B618‘s WLAN simply by pushing the WPS button. You can then access the Internet through the Huawei B618.

Procedure

  1. On the Mobile Broadband‘s web management page, choose Settings> WLAN > WPS Settings .

 NOTE:

By default, WPS is set to On. If WPS is set to Off, the WPS connection mode cannot be set.

  1. From the Working band drop-down list, select the working frequency band.
  2. Choose PBC.
  3. Press the WPS button on the client.
  4. Click Connecton the Huawei B618‘s web management page.

 NOTE:

  • For details about operations on the client, see the client’s user guide.
  • Click Connecton the Huawei B618‘s web management page within 2 minutes after you press the WPS button on the client.

 

 

  • Connecting a Client to the Mobile Broadband Through AP PIN

In AP Personal Information Number (PIN) mode, you can securely connect a client to the Huawei B618‘s WLAN by simply entering the Huawei B618‘s PIN on the client. You can then access the Internet through the Huawei B618.

Procedure

  1. On the Huawei B618‘s web management page, choose Settings> WLAN > WPS Settings .

 NOTE:

By default, WPS is set to On. If WPS is set to Off, the WPS connection mode cannot be set.

  1. Obtain the Huawei B618‘s PIN using either of the following methods:
    • Click Generate PIN to obtain the randomly generated PIN.
    • Click Reset PINto obtain the initial PIN.
  2. Set the client’s WPS connection mode to AP PIN, and enter the Huawei B618‘s PIN on the client.

 NOTE:

For details about operations on the client, see the client’s user guide.

 

  • Setting WLAN MAC Filtering

You can control and manage the clients that access the wireless local area network (WLAN) to improve the security performance of the WLAN.

Procedure

  1. Choose Settings> WLAN > WLAN MAC Filter .
  2. From WLAN MAC Filter, select a Media Access Control (MAC) filtering mode.
    • Disable: to disable the function of filtering MAC addresses.
    • Allow: If the MAC address of a client is listed in MAC Address, the client is allowed to connect to the Huawei B618 over the WLAN.
    • Deny: If the MAC address of a client is listed in MAC Address, the client is prohibited from connecting to the Huawei B618 over the WLAN.
  3. In MAC Address, enter the MAC addresses of the clients to be controlled.
  4. Click Apply.
  • Allowing Specified Clients to Access the WLAN
  1. Click Settings> Security > Device Management . From the MAC Address column under Connected WLAN clients, find the MAC addresses of clients whose access to the WLAN is allowed. For example, 40:4D:8E:6D:80:7D.
  2. Choose Settings> WLAN > WLAN MAC Filter . From WLAN MAC Filter, select Allow.
  3. In MAC Address, enter 40:4D:8E:6D:80:7D.
  4. Click Apply.

 

 

  • Specifying the WLAN Bandwidth

The wireless local area network (WLAN) bandwidth is the transmission frequency bandwidth of the Huawei B618. A greater transmission frequency bandwidth indicates a faster data transmission speed and lower penetrability.

Procedure

  1. Choose Settings> WLAN > WLAN Advanced Settings .
  2. Select the desired WLAN bandwidth from the Wi-Fi bandwidth drop-down list box.
  3. Click Apply.

 

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html

 

Huawei B618 Time Service Settings

Time Service Settings

Network time synchronization function will be activated or deactivated by enabling or disabling SNTP.

  • Enabling SNTP
    Enabling Simple Network Time Protocol (SNTP) and synchronizing the Huawei B618 Router time allows you to maintain the same time as the server.

 

 

Enabling SNTP

Enabling Simple Network Time Protocol (SNTP) and synchronizing the Huawei B618 Router time allows you to maintain the same time as the server.

Procedure

  1. Choose Settings> System > Time Service Settings.
  2. Select the SNTP check box.
  3. Select Primary NTP server, which is the preferred server for time synchronization.
  4. Select Secondary NTP server, which is the backup server for time synchronization.
  5. Select Local time zone.
  6. Click Apply.

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html

Huawei B618 System Management

  • Viewing Mobile Broadband Information
    This section describes how to view the information about the Huawei B618.

 

  • Switching Between Languages
    This section describes how to switch between the Huawei B618‘s user interface languages.

 

  • Changing the Password
    To prevent unauthorized access to the management page, change the login password.

 

  • Restoring Default Settings
    After you restore the Huawei B618to its default settings, your personal information will be deleted, and parameters will be restored to their default values.

 

  • Rebooting the Mobile Broadband
    This section describes how to reboot the Huawei B618.

 

  • Diagnosing Network Connection Exceptions
    If the Huawei B618 cannot connect to the Internet, use the diagnostics tools to identify the possible causes.

 

  • System logs
    Logs record user operations and key running events.

 

  • Setting the Antenna Type
    This topic describes how to set the antenna type.

 

  • Setting Auto Update
    You can perform this task to enable system auto update.

 

  • Update Settings
    Once this feature is enabled, you will be able to perform an online update without logging in to the configuration management page.

 

  • Setting Up Critical Updates
    Once you enable critical updates, the system will automatically install critical updates from the server.

 

  • Scheduled restart
    You can set the system to restart within the specified time period.

 

——————————————————————————————————————–

 

Viewing Mobile Broadband Information

This section describes how to view the information about the Huawei B618.

Procedure

  1. Choose Settings> System > Device Information .
  2. View Huawei B618

 

———————————————————-

Switching Between Languages

This section describes how to switch between the Huawei B618‘s user interface languages.

Procedure

  1. Click the drop-down list in upper right corner of the page.
  2. From the language drop-down list, select the desired language.

 

———————————————————-

Changing the Password

To prevent unauthorized access to the management page, change the login password.

Procedure

  1. Choose Settings> System > Modify Password .
  2. Enter the current password.
  3. Enter a new password and confirm it.

 NOTE:

The password can contain a maximum of 32 characters, including numbers, letters (upper or lower case), space, and the following symbols: ! # $ ( ) * – . / = @ [ ] ^ _ ` { } ~ |

Password strength rules

  • Low password: password length is less than 6 characters and includes only one of the following: lowercase letters, uppercase letters, numbers, and symbols, or the password is the same as the user name or the user name spelled backwards.
  • General password: password length is from 6 to 10 characters and includes two combinations of any of the following: lowercase letters, uppercase letters, numbers, and symbols.
  • High password: password length is greater than 10 characters and includes two combinations of any of the following: lowercase letters, uppercase letters, numbers, and symbols. Alternatively, the password length is greater than or equal to 6 and you must include three combinations of the preceding character requirements.

A strong password cannot contain repeated letters, numbers, or symbols for more than 1/3 of the total length. A general password cannot contain repeated letters, numbers, or symbols for more than 2/3 of the total length. For example, in “11aaa”, two characters are repeated, therefore the repeat length is 5.

  1. Click Apply.

 

———————————————————-

Restoring Default Settings

After you restore the Huawei B618 to its default settings, your personal information will be deleted, and parameters will be restored to their default values.

Procedure

  1. Choose Settings> System > Restore Defaults .
  2. Click Restore.

 

———————————————————-

Rebooting the Mobile Broadband

This section describes how to reboot the Huawei B618.

Procedure

  1. Choose Settings> System > Restart.
  2. Click Restart.

 

———————————————————-

Diagnosing Network Connection Exceptions

If the Huawei B618 cannot connect to the Internet, use the diagnostics tools to identify the possible causes.

  • Performing a Ping Test
    If the Huawei B618 cannot connect to the Internet, perform a ping test to identify the possible causes.
  • Performing a Traceroute Test
    If the Huawei B618 cannot connect to the Internet, perform a traceroute test to identify the possible causes.

 

 

Performing a Ping Test

If the Huawei B618 cannot connect to the Internet, perform a ping test to identify the possible causes.

Procedure

  1. Choose Settings> System > Diagnosis .
  2. Select Pingfrom the Diagnosis method drop-down list box.
  3. In the Destination IP address/domain name text box, enter the IP address or domain name, for example www.google.com.
  4. Set Timeout period.
  5. Click Apply.

The diagnostics results are displayed in the Result area on the bottom of the page.

 

 

Performing a Traceroute Test

If the Huawei B618 cannot connect to the Internet, perform a traceroute test to identify the possible causes.

Procedure

  1. Choose Settings> System > Diagnosis .
  2. Select Traceroutefrom the Diagnosis method drop-down list box.
  3. In the Destination IP address/domain name text box, enter the IP address or domain name, for example www.google.com.
  4. Set Maximum hops and Timeout period.
  5. Click Apply.

The diagnostics results are displayed in the Result area on the bottom of the page.

 

———————————————————-

 

System logs

Logs record user operations and key running events.

Procedure

  1. Choose Settings> System > System Logs .
  2. Select the corresponding log level from the Display type drop-down list.
  3. Select the corresponding log level from the Display level drop-down list.

 NOTE:

All logs are displayed in the output box.

 

———————————————————-

Setting the Antenna Type

This topic describes how to set the antenna type.

Procedure

  1. Choose Settings> System > Antenna Settings .
  2. Select the antenna type from the drop-down list.
  3. Click Apply.

 

———————————————————-

Setting Auto Update

You can perform this task to enable system auto update.

Procedure

  1. Select Settings> System > System Settings.
  2. Select Auto update.

 

———————————————————-

Update Settings

Once this feature is enabled, you will be able to perform an online update without logging in to the configuration management page.

Context

  • The update without login feature is enabled by default on all software versions that support this feature.
  • Once enabled, all Wi-Fi users connected to Huawei B618 can update the device without logging in. If you do not wish to let other users perform an update, it is recommended that you disable this feature to avoid security risks.

Procedure

  1. Choose Settings> System > System Settings.
  2. Select Online update settings.

 

———————————————————-

Setting Up Critical Updates

Once you enable critical updates, the system will automatically install critical updates from the server.

Context

  • Critical updates is enabled by default.
  • When this function is enabled, the system will automatically install critical updates from the server. If you do not want automatic updates, you can disable this function to prevent security risks.

Procedure

  1. Choose Settings> System > System Settings .
  2. Select Critical update settings.

 

———————————————————-

Scheduled restart

You can set the system to restart within the specified time period.

Procedure

  1. Choose Settings> System > System Settings .
  2. Select the Scheduled restart check box.

 

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html

Huawei B618 Security Settings

  • Enabling or Disabling the Firewall
    The Huawei B618 4G Router supports the firewall function to control the transmission of data streams and protect your local area network from unauthorized access.

 

  • Setting LAN IP Filtering
    The LAN IP address filtering function is used to block specified clients in the LAN from accessing specified Internet services.

 

  • Configuring a Virtual Server
    The Huawei B618 4G Router supports the virtual server to enable external users to use the services provided in the local area network (LAN) using the Hypertext Transfer Protocol (HTTP), File Transfer Protocol (FTP), and other protocols.

 

  • Configuring a Special Application
    The Huawei B618 4G Router supports the function to use a special application to configure dynamic port forwarding. Certain applications in the local area network (LAN) must use a specified port of the firewall to access remote applications. To set up a Transmission Control Protocol and User Datagram Protocol (TCP/UDP) connection between an application in the LAN and a remote application, the firewall uses this port forwarding function to open the required port.

 

  • Setting the DMZ
    If external users cannot access certain network services provided by the local area network (LAN), use the DMZ function provided by the Huawei B618 4G Router to set the client that provides the required network services as the DMZ host; external users can then access these services properly. DMZ is an acronym for the demilitarized zone in networks.

 

  • Setting the SIP ALG
    The Session Initiation Protocol (SIP) is a control protocol at the Application Layer. It is used to initiate, change, or end a session. An application-level gateway (ALG) is a specific application of SIP and is used to check the status of data packages. To complete a SIP application, enable the SIP ALG.

 

  • Setting the UPnP
    The Universal Plug and Play (UPnP) service realizes intelligent connection between two UPnP devices using port forwarding. UPnP devices can obtain IP addresses automatically and access the Internet dynamically.

 

  • Configuring NAT
    Network address translation is the process of modifying source and destination IP addresses when IP packets are transmitted across a router or firewall. The purpose of this process is to translate internal (private) IP addresses into external (public) IP addresses to provide a solution to the impending exhaustion of IP addresses. Huawei B618 4G Router supports port-restricted cone NAT and symmetric NAT. You can configure the NAT settings as required.

 

  • Filtering Specified Websites
    The Huawei B618 4G Router enables you to specify and filter websites.

 

  • Setting the DDNS
    The Dynamic Domain Name Server (DDNS) is a system that associates a network address with a dynamic IP address. After you configure the DDNS, the Huawei B618 4G Router sends the dynamic IP address of a computer to the DDNS. The DDNS then associates the updated IP address with the specified network address so that Internet users can use this network address to access the resources that you provide.

 

  • Filtering Specified Devices
    The MAC filtering function of the Huawei B618 4G Router can filter specified devices on the Huawei B618 4G Router local area network (LAN) so these devices are prevented from accessing the Internet or other devices on the same LAN.

 

——————————————————————————————————————–

 

Enabling or Disabling the Firewall

The Huawei B618 LTE Router supports the firewall function to control the transmission of data streams and protect your local area network from unauthorized access.

Procedure

  1. Choose Settings> Security > Firewall.
  2. Select Enable firewall to enable the firewall or clear it to disable the firewall.

 NOTE:

Other parameters are available only if you select Enable firewall.

  1. Select Enable IP address filter to enable the function of filtering IP addresses.
  2. Select Disable WAN port ping to disable the ping function.
  3. Select Enable domain name filter to enable the function of filtering URLs.
  4. Select Enable MAC filter to enable the MAC filtering function.
  5. Click Apply.

 

———————————————————-

Setting LAN IP Filtering

The LAN IP address filtering function is used to block specified clients in the LAN from accessing specified Internet services.

Prerequisite

The IP address filtering function is enabled. For details, see Enabling or Disabling the Firewall.

Context

The following table lists common protocols at the application layer of TCP/IP.

Protocol Default Port Service Provided
HTTP 80 Browse web pages.
SMTP 25 Send emails.
POP3 110 Receive emails.
FTP 21 Transfer files.
TELNET 23 Log in to a remote computer.

 NOTE:

For details about the port used for a service, contact your service provider.

Procedure

  1. Choose Settings> Security > LAN IP Filter .
  2. Choose one of the following options:
    • Blacklist: Set the websites that you do not want users to access.
    • Whitelist: Set the websites that users are allowed to access.
  3. Click Add and set the parameters.
  4. Click OK to save the settings.

 NOTE:

  • Click Edit to edit a selected item in the list.
  • Click Delete to delete a selected item from the list.
  1. Click Apply for the settings to take effect.

Restricting Clients in a WLAN from Accessing Specified Websites

For example, if you want to restrict a client (192.168.1.101) in a WLAN from accessing www.abc.com, perform the following steps:

  1. Choose Settings> Security > LAN IP Filter .
  2. Select Blacklist.
  3. Click Add and set the parameters.
LAN IP Address Enter 192.168.1.101.

NOTE:

You can view the IP addresses of the clients connected to the Huawei B618 under the Connected WLAN clients section on the Statistics page.
LAN Port Enter 80.
WAN IP Address a.       On your computer, choose Start > Run.

b.      Enter cmd and press Enter.

c.       In the displayed window, enter ping www.abc.com and press Enter.

d.      View the IP address of www.abc.com. For example, it is 1.2.3.4.

e.       In the text box for Huawei B618, enter 1.2.3.4.

NOTE:

The Windows 7 operating system is used in this example to describe how to obtain WAN IP addresses.
WAN Port Enter 80.
Protocol Select TCP/UDP.

NOTE:

If you do not know the protocol, select TCP/UDP. The Mobile Broadband will automatically select an appropriate protocol.
Status Select On.
Options Click OK.
  1. Click Apply for the settings to take effect.

 

———————————————————-

Configuring a Virtual Server

The Huawei B618 LTE CPE supports the virtual server to enable external users to use the services provided in the local area network (LAN) using the Hypertext Transfer Protocol (HTTP), File Transfer Protocol (FTP), and other protocols.

Procedure

  1. Choose Settings> Security > Virtual Server .
  2. Click Add and set the parameters.
  3. Click OK to save the settings.

 NOTE:

  • Edit: to edit an item.
  • Delete: to delete an item.
  1. Click Apply for the settings to take effect.

Configuring an FTP Server

To enable a client whose IP address is 192.168.8.101 to provide FTP services and be accessed by external users, do the following:

  1. Configure a virtual server.
Name WAN Port LAN IP Address LAN Port Protocol Status
My FTP server 21-22 192.168.8.101 23-24 TCP On
  1. Choose Settings> System > Device Information , view the wide area network (WAN) IP address of the Huawei B618. For example 10.2.1.123.
  2. In the browser of an external user, enter the FTP server address (ftp://10.2.1.123) and access the FTP services provided by the client whose IP address is 192.168.8.101.

 NOTE:

If the default service port is 21-22, the external user should enter ftp://10.2.1.123:21 or ftp://10.2.1.123:22 to access the FTP server.

 

———————————————————-

Configuring a Special Application

The Huawei B618 LTE CPE supports the function to use a special application to configure dynamic port forwarding. Certain applications in the local area network (LAN) must use a specified port of the firewall to access remote applications. To set up a Transmission Control Protocol and User Datagram Protocol (TCP/UDP) connection between an application in the LAN and a remote application, the firewall uses this port forwarding function to open the required port.

Procedure

  1. Choose Settings> Security > Special Applications.
  2. Click Add and set the parameters.
  3. Click OK to save the settings.

 NOTE:

  • Edit: to edit an item.
  • Delete: to delete an item.
  1. Click Apply for the settings to take effect.

Example of the Configuration of a Special Application

A client in the LAN uses TCP to access the MSN game server through port 47624. When the game starts, the game server uses TCP and port 2400 to set up a connection to the client that tries to access the server. In this case, you must configure dynamic port forwarding, because the game conflicts with the following default firewall rules:

  • The firewall blocks external data input.
  • The game server can send a connection request to the external IP address of the Huawei B618 but cannot send the request to the LAN client that tries to access the game server, because the IP addresses of clients are not open to external devices.

To solve this problem, you must define a set of port forwarding rules. When the client in the LAN sends data to TCP port 47624, the rules allow data input from TCP port 2400. Then data from the game server can be received from and transmitted to the LAN client that sends data to TCP port 47624.

Name Status Trigger Port Trigger Protocol Open Protocol Open Port
MSN Gaming Zone On 47624 TCP TCP 2400

 NOTE:

For details about Trigger Port, Open Port, Trigger Protocol, and Open Protocol, contact your service provider.

 

———————————————————-

Setting the DMZ

If external users cannot access certain network services provided by the local area network (LAN), use the DMZ function provided by the Huawei B618 to set the client that provides the required network services as the DMZ host; external users can then access these services properly. DMZ is an acronym for the demilitarized zone in networks.

Prerequisite

DMZ users are not protected by the firewall and may be easily attacked. In addition, the security of other users in the LAN is compromised.

Procedure

  1. Choose Settings> Security > DMZ Settings.
  2. Select:
    • Enable: to enable the DMZ function.
    • Disable: to disable the DMZ function.
  3. In DMZ IP address:, enter the IP address of the client to be set as the DMZ host.

 NOTE:

One client can be set as the DMZ host at a time.

  1. Click Apply.

 

———————————————————-

Setting the SIP ALG

The Session Initiation Protocol (SIP) is a control protocol at the Application Layer. It is used to initiate, change, or end a session. An application-level gateway (ALG) is a specific application of SIP and is used to check the status of data packages. To complete a SIP application, enable the SIP ALG.

Procedure

  1. Choose Settings> Security > SIP ALG Settings.
  2. Select Enable SIP ALG to enable the SIP ALG.
  3. In SIP port, enter the SIP port number provided by your service provider.
  4. Click Apply.

 

———————————————————-

Setting the UPnP

The Universal Plug and Play (UPnP) service realizes intelligent connection between two UPnP devices using port forwarding. UPnP devices can obtain IP addresses automatically and access the Internet dynamically.

Procedure

  1. Choose Settings> Security > UPnP Settings.
  2. Select:
    • Enable: to enable the UPnP service.
    • Disable: to disable the UPnP service.
  3. Click Apply.

 

———————————————————-

Configuring NAT

Network address translation is the process of modifying source and destination IP addresses when IP packets are transmitted across a router or firewall. The purpose of this process is to translate internal (private) IP addresses into external (public) IP addresses to provide a solution to the impending exhaustion of IP addresses. Huawei B618 LTE CPE supports port-restricted cone NAT and symmetric NAT. You can configure the NAT settings as required.

Procedure

  1. Choose Settings> Security > NAT Settings.
  2. Select from the following options:
    • Cone: to enable port-restricted cone NAT. This type of NAT are more compatible with applications (including applications on game devices), although it provides lower security.
    • Symmetric: to enable symmetric NAT. This type of NAT are generally adopted by gateways with higher security.
  3. Click Apply.

 

———————————————————-

Filtering Specified Websites

The Huawei B618 LTE Gateway enables you to specify and filter websites.

Procedure

  1. Choose Settings> Security > Domain Name Filter.
  2. Choose one of the following options:
    • Blacklist: Set the websites that you do not want users to access.
    • Whitelist: Set the websites that users are allowed to access.
  3. Click Add.
  4. In Domain Name, enter the address of the website you want to filter.
  5. From the Status drop-down list, select On.
  6. Click OK.
  7. Click Applyfor the settings to take effect.

 

 

———————————————————-

Setting the DDNS

The Dynamic Domain Name Server (DDNS) is a system that associates a network address with a dynamic IP address. After you configure the DDNS, the Huawei B618 sends the dynamic IP address of a computer to the DDNS. The DDNS then associates the updated IP address with the specified network address so that Internet users can use this network address to access the resources that you provide.

Procedure

  1. Choose Settings> Security > DDNS.
  2. Click Add.
  3. Set DDNS parameters.

 NOTE:

The user name and password must be registered on the website of the DDNS service provider.

  1. Click OK.

Example

To share large files or videos with Internet users:

  1. Register a DDNS user name and password on a DDNS service provider. For example, register an account with both the user name and password as admin on http://www.dyndns.org/.
  2. Choose Settings> Security > DDNS.
Service Provider Status Domain Name User name Password
DynDNS.org On www.abc.com admin admin
  1. Click OK.
  2. Internet users will then be able to access your resources by accessing abc.comfrom their browsers.

 

———————————————————-

Filtering Specified Devices

The MAC filtering function of the Huawei B618 4G Router can filter specified devices on the Huawei B618 4G Router local area network (LAN) so these devices are prevented from accessing the Internet or other devices on the same LAN.

Procedure

  1. Choose Settings> Security > MAC Filter.
  2. Select an MAC filtering mode from the Filtering mode: drop-down list box.
    • Disable: Disable the MAC filtering function.
    • Allow: If the MAC address of a client is in the MAC Address list, the client is allowed to connect to the Huawei B618 4G Router.
    • Deny: If the MAC address of a client is in the MAC Address list, the client is not allowed to connect to the Huawei B618 4G Router.
  3. In the MAC Address text box, enter the MAC address of the client you want to filter.
  4. Click Apply.

 

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html