Category: New Products

ZTE MF905 WiFi Hotspot in Car Review

The ZTE VFi MF905 was first presented to public since last year, but it seems very few network provider had introduced this product to their data plan. Today, we get the ZTE MF905 Mobile WiFi Hotspot and it’s unbranded.

ZTE MF905 VFI

However, unlike its competitor Huawei E8377 CarFi, the MF905 MiFi has two parts. More specifically, the ZTE MF905 is only a small WiFi hotspot like Huawei E5331 but much smaller. If you want to use the ZTE MF905 in a car, you must get the cigarette charger base and plug the ZTE MF905 into the base. Then they would work together to provide wireless network in a car. There are 4 interfaces for power supply at the bottom of ZTE MF905 body. The interfaces would be suitable for the base.

ZTE MF905 VFI

If you don’t use the ZTE MF905 in a car, you can pull out the MF905 and it can get power supply through a USB cable which is included in the package. Of course, you can plug a SIM card into the MF905 and with power supply, you can get wireless network from this MF905.

ZTE MF905 VFI

On the front of ZTE MF905, there are 4 indicators for power, WiFi, signal strength and message. The power button is just in the middle of the 4 indicators. Below them is the ZTE logo. The front cover can be removed and after removed, we can see the SIM card slot. And the Reset hole is around the power button. But there is no slot for Micro SD card.

ZTE MF905 VFI

At the bottom of the ZTE MF905, there is a label showing the information:

 

Model number: ZTE MF905

Power input: DC 5V-1.5A

CMIIT ID: 2016CP6404

IMEI: 862252030032XXX

WLAN SSID: ZTE_9E4A07

WLAN Key: 71889989

IP Address: 192.168.0.1

Password: admin

Manufacturer: ZTE

ZTE MF905 VFI

ZTE MF905 could support the LTE Category 4 with peak download speed to 150mbps and upload speed to 50Mbps. Up to 8 wireless users could connect to MF905 and surf simultaneously. ZTE MF905 could support the 802.11 b/g/n/ac standard and it could be managed by APP through mobile phones.

ZTE MF905 VFI

The cigarette charger base can work well with MF905. Besides the power supply, there is also one USB port to charge other electric devices such as smartphones, Pads. On the cigarette body, there is also a label showing the information:

ZTE MF905 VFI

MF905 Especially for Car

Input: 12 – 2A

Output: 5V — 2.5A

USB Output: 5V — 1A

 

ZTE MF905 VFI

The two parts are packed in respective boxes. If you will use the ZTE MF905 in a car, don’t forget to get the cigarette base to let them work together. Otherwise, you need connect USB cable with the MF905 to work as a common mobile hotspot.

ZTE MF905 VFI

Conclusion

The ZTE MF905 is cool in black and the function is very practical with high LTE download speed support for up to 8 users. But the division of the two parts may not be a good design because the upper part of MF905 doesn’t have an insert battery, so if you want it work independently; you must keep it connected with the USB power adapter through the USB cable. It can’t work like a mobile pocket WiFi hotspot unless you let it work with a power bank. On this point, the Huawei E8377 may be more professional for a car.

 

Huawei B618S-22D 4G LTE Cat11 WiFi Router

A brand new Huawei LTE router has been launched in Europe and is now available for purchase on www.4gltemall.com . This is Huawei B618s-22d. It is a rather remarkable product in LTE category 11! Yes, you may have read, it allows to reach 600Mbit/s for download and 50Mbit/s for upload theoretically. Of course, you will not be able to reach such bit rates immediately, but this augurs well for the importance that 4G (and later 5G) reception will take by the various wired networks in areas badly covered.

Huawei B618 B618s-22d 4G Router

The Huawei B618s-22d router is in compact design and it resembles its predecessor Huawei E5180 LTE CPE. The dimensions are 9.5cm long, 20.8cm high and 9.5cm thick. Its weight is 700 grams. It supports the 4G+ category 11 on the bands: 1/3/7/8/20/38 (FDD 800/900/1800/2100/2600MHz, TDD 2600MHz). It is therefore almost entirely compatible with all frequencies in Europe and other areas in Asia. But it’s a pity that it does not support the frequency 700MHz(B28).

Huawei B618 B618s-22d 4G Router

The proposed WIFI is a/b/g/n/ac on 2 bands (2.4Ghz and 5Ghz) and supports up to 64 connected devices. (Attention, theoretical data in laboratory, strongly dependent on wall thickness and other parameters.) At the LAN ports, there are 2 RJ45 gigabits and 1 LAN/WAN port. It is possible to connect an external antenna through the 2 TS9 ports. If you want to buy the external 4G/LTE antenna for Huawei B618, we had tested two external antennas for indoor and outdoor use:

Huawei B618 4G Router LTE Indoor External Antenna:

http://www.4gltemall.com/4g-antenna-two-ts-9-connector.html

4G LTE Indoor Antenna (2 x TS-9 Connectors) for Huawei/ZTE 4G LTE Modems/dongles/mobile hotspots

 

Huawei B618 4G Router LTE Outdoor External Antenna:

http://www.4gltemall.com/4g-lte-outdoor-antenna-2-x-ts-9-connectors.html

4G LTE Outdoor Antenna (2 x TS-9 Connectors) for Huawei/ZTE 4G LTE Dongles/aircards/modems/mobile hotspots

 

An RJ11 port allows you to connect a phone on it to make calls via the inserted SIM card (Provided you do not force the router only on the 4G so that it can switch to the other frequencies (3G) and your plan not only in data). The VOIP/SIP is available and configured in the web interface. A USB 2.0 port connects a hard drive or printer.

Huawei B618 B618s-22d 4G Router

More advanced settings are available as integrated DDNS, integrated VPN client, SMS sending/receiving … The SIM card must be in the MICRO SIM format. It has a multilingual interface that you manage from your computer to configure your network quickly and easily (DHCP, VOIP, FIREWALL, etc.) but is also compatible with the mobile application “Huawei Mobile WiFi” for a configuration via smartphone.

 

It has an on/off button which is handy to turn it off when you do not use it. Also, a WPS button (to connect wifi easily) and 8 LEDs will let you know the intensity of your 4G reception, WIFI activity, LAN activity, power, etc.

Huawei B618 B618s-22d bottom label

This Huawei B618s-22d is one of Huawei’s latest flagship router. Equipped with the latest technological innovations and in particular the 4G+ (category 11) 600Mbits/s, it will be suitable for those wishing to benefit from the current top LTE network. If you think the price is high, you may get satisfied with the lower level router Huawei B525s-23a or a Huawei B315s-22a that do their job right with almost half the price.

Test of TP-Link Archer MR200 4G Router

The TP-Link Archer MR200 Router is a feature-rich router built to maximize performance in your mobile broadband. We had a simple test to show more about TP-link MR200 router.

TP-Link Archer MR200 is a desktop 4G router. Unlike the Netgear AirCard 810 Mobile Hotspot we tested recently, Archer MR200 is not a router you can take to town (unless you know you’ll be near an electrical outlet). It is relatively large and clumsy and has no rechargeable battery. Instead, it is supposed to be used indoor where the router can get continuous power supply and then the broadband connection would be done quickly and easily.

It is also there, in a poor reception reception, the TP-Link Archer MR200 is supposed to show its strength, as it is equipped with a pair of solid external antennas to enhance the 4g reception.

User-friendly and feature-rich

Getting Started with TP-Link the Archer MR200 is really friendly. Just plug in with the 4G SIM card, turn on the router, enter the preset password that is written on the bottom of the router and start surfing.

When it is time to configure the 4g LTE router, this appears to be as easy and smooth as the installation itself. The interface is exemplary quickly, easily and clearly, even when we enter the more advanced settings.

Despite its rather simple exterior, the TP-Link Archer MR200 proves to be a truly functional and configurable router. Here it is in the top layer compared with competitors in the market.

 

Reception Good

Initially, the TP-Link Archer MR200 manages well in our performance tests. Reception is normal under normal conditions. The connection is always stable during the time we tested it. The WiFi results are slightly better. Here, the TP-Link Archer MR200 puts itself in the top level. The same good results goes for range tests, the TP-Link Archer MR200 gets good values ​​and performed better than most of tested routers.

 

But when we come to what will be the strength of TP-Link Archer MR200, the reception under difficult conditions, we will be a little bit disappointed. Instead of getting to the top, the TP-Link Archer MR200 turns out to be worse than the average. In fact, the TP-Link Archer MR200 is far below the newly tested mobile router Netgear AirCard 810. If you are located at somewhere with bad signal, you’d better choose a wireless router with connectors for external outdoor LTE antenna, which may help the router to get better 4G/LTE network, so you will enjoy the fastest possible network.

Conclusion

TP-Link Archer MR200 is not a bad router, but does not do all as what we expect from a powerful 4G router. When the router work in good network condition, it performs good, but if in bad condition areas, it has much space to improve to shorten the distance to its competitors. There are many similar 4G routers on the market that are more affordable than this one such as Huawei E5186, ZTE MF286 etc. At last, we have a look at the basic features of TP-link Archer Mr200:

Features of TP-Link Archer MR200

Manufacturer : TP-Link

Function : 4G router with ac-wifi

System Requirements: 2G/3G/4G LTE Mobile Broadband.

Wi-Fi: 802.11ac/b/g/n, Dual band 2.4/5 GHz.

Security: Wep, WPA, WPA2

Network Ports : 3 pcs, 1 pc wan/lan.

Connections: Charging connector, external antennas.

Screen: 2.4 inch color touch screen.

Size: 20.2 x 14.1 x 3.4 cm.

Other: 3 internal wifi antennas, 2 external 4g antennas.

 

 

TP-Link Archer MR200 4G LTE Router Review

With the growing demand for 4G wireless routers, the manufacturer are continuing presenting new LTE routers to the market. As the competitor of Huawei routers, TP-Link offers two new 4G routers this year; we are very interested in the most high-end router named TP-Link Archer MR200. Let us have a close look at its characteristics:

TP-Link Archer MR200 Highlights:

* High-end 3G/4G Routers

* Ideal for use on the road or in rural areas without DSL availability

* Supports the 4G/LTE mobile phone standard with download rates of up to 150Mbit/s

* No configuration required – simply insert the SIM card and put the LTE hotspot into operation

* Simultaneous dual band according to 802.11ac: up to 300 Mbit/s on 2.4 GHz and 433 Mbit/s on 5 GHz

* Freely configurable LAN/WAN port for the alternative connection via cable or fiber optic modem

TP-link Archer MR200 is ideal for use on the road or in rural areas without DSL availability. It supports the LTE/4G mobile communications standard with up to 150 Mbps in the download and 50 Mbps in the upload for uninterrupted video streaming and online gaming. Thanks to a built-in modem, you only need to use a valid 4G/LTE SIM card to set up your own WLAN hotspot for multiple users/devices.

 

Dual-band Connection with 802.11ac

 

Via WLAN, the Archer MR200 provides data rates of up to 733 Mbit/s according to 802.11ac. It works on both the 2.4 GHz and the 5 GHz band and thus ensures incredible WLAN performance. This simultaneous operation gives you the flexibility of two dedicated WLANs to which you can assign various purposes: email, chat, and surf at up to 300Mbps on 2.4GHz and simultaneous online gaming and HD video streaming at up to 433Mbps on 5 GHz.

 

Easy commissioning of a 4G/LTE connection

 

The Archer MR200 has an integrated 4G/LTE modem and an SIM card slot. You just have to plug in an unlocked SIM card and you will have your 4G/LTE hotspot in operation. Setting up a fast and stable mobile connection has never been easier!

 

 

WLAN where you need it

 

The Archer MR200 allows you to quickly and easily set up a 4G/LTE hotspot for multiple devices. This gives you an Internet access wherever you need it – whether in the meeting room, on the building site or in the holiday home.

 

WAN port for more flexibility

 

With its LAN/WAN port, the Archer MR200 offers another option for broadband connection via DSL, cable or fiber. This means that you are more flexible when choosing your Internet service provider, and can have the option of a backup solution. you can connect several PCs to ethernet directly, which is always better for performance.

 

Below are the detail features and specifications for TP-link Archer MR200:

Hardware Features
InteIrface 3 10 / 100Mbps LAN ports
1 10 / 100Mbps LAN / WAN port
1 SIM card slot
Button WPS / Reset
WLAN
Power
Antenna 3 internal for WLAN
2 removable for LTE
External power supply 12V / 1A DC voltage
Dimensions (B * T * H) 202mm * 141mm * 33,6mm
Wireless Functions
WLAN standards 5GHz:  IEEE802.11ac/n/a
2.4GHz:  IEEE802.11b/g/n
Frequency 2.4GHz & 5GHz
Signal rate 300Mbps to 2.4GHz
433Mbps to 5GHz
Receiver sensitivity 5GHz:
11a 54M: -74dBm
11ac HT20: -67dBm
11ac HT40: -64dBm
11ac HT80: -60dBm
11n HT20: -71dBm
11n HT40: -70dBm
2.4GHz:
11g 54M: -76dBm
11n HT20: -73dBm
11n HT40: – 67dBm
Transmission power CE:
max. 20dBm to 2.4GHz
max. 23dBm to 5GHz
WLAN features WLAN on / off
WDS Bridge
WMM
WLAN statistics
WLAN security WEP with 64 / 128Bit
WPA / WPA2
WPA-PSK / WPA2-PSK
Network Type (V2) 4G: FDD-LTE B1 / B3 / B7 / B8 / B20
4G: TD-LTE B38 / B40
3G: DC HSPA+ / HSPA+ / HSPA / UMTS B1 / B8 (2100 / 900MHz)
2G: EDGE / GPRS / GSM Quadband (850/900/1800 / 1900MHz)
Network type 4G: FDD-LTE Cat4 (800/900/1800/2100 / 2600MHz),
TDD-LTE (2300 / 2600MHz)
3G: DC-HSPA+ / HSPA+ / HSPA / UMTS (900 / 2100MHz)
2G (EDGE / GPRS / GSM 850/900/1800 / 1900MHz)
Software Features
Quality of Service Traffickertrolle (IP-QoS)
Modes 3G / 4G router
wireless router
WAN type Dynamic / Static IP address
PPPoE
PPTP (Dual access)
L2TP (Dual access)
Administration Access control
Local administration
Remote maintenance
DHCP Server
Client
DHCP client list Address
reservation
Port Forwarding Virtual server
port triggering
UPnP
DMZ
Dynamic DNS DynDNS
No-IP
VPN passthrough PPTP
L2TP
IPsec
Access control Parental Control
Local Management
Host List
schedule
policy management
Firewall Security DoS protection
SPI firewall
IP address filter / domain name filter
IP / MAC address binding
Logs IPv4
IPv6
Guest network 1 per WLAN band
IPsec VPN Up to 10 IPsec VPN tunnels
OTHERS
Certification CE
FCC
RoHS
Package contents AC750 dualband LTE wireless router MR200 Archer
2 Antennas
RJ45 Ethernet cable
power adapter
Quick Install Guide
Micro and Nano SIM Card Adapter
System requirements Microsoft Windows® 98SE, NT, 2000, XP, Vista, 7, 8 or 10
MacOS®
NetWare®
UNIX®
Linux
Microsoft Internet Explorer 11, Mozilla Firefox 12.0, Google Chrome 20.0, Apple Safari 4.0 or higher
Surroundings Operating temperature: 0 ° C..40 ° C
Storage temperature: -40 ° C..70 ° C
Operating humidity: 10% .. 90%, non-condensing
Storage humidity: 5% .. 90%, non-condensing

 

The TP-link MR200 has undeniable strengths, including the possibility of changing the two LTE antennas for more powerful. It is also possible to turn off the wifi with a button, which allows ecologists to avoid permanent exposure to the waves.  We would take full test of the performance of this TP-link Archer MR200 and present a report for potential users’ reference.

 

Huawei B525s-23a 4G LTE Cat6 Router Review

The manufacturer HUAWEI has launched the router B525-23a in 2017, and now the latest 4G router B525 is already available for some network providers in Europe, Middle East and Asia, which is to replace the same excellent predecessor router Huawei E5186s-22a.

Huawei B525 B525s-23a

The dimensions of Huawei B525 router are 22.6cm long, 16.3cm high and 5.3cm thick. Its weight is 370 grams. These features mean it’s not a portable pocket WiFi router. It supports the 4G+ LTE category 6 on the bands:  1/3/7/8/20/32/38 (800/900/1500/1800/2100/2600MHz, TDD 2600MHz). No 700MHz(Band 28), so check first whether this router is right for your areas before you pick up, i.e. your network providers broadcasts on the above bands, which will make sure you can use this new router normally without any problem.

Huawei B525 B525s-23a

The proposed WIFI is a/b/g/n/ac on dual bands 2.4Ghz and 5Ghz and supports up to 64 devices connected over 250m range. (Warning: these are the data of the manufacturer in optimal conditions; the range of the wifi depends on the thickness of the walls and other parameters.) At the back of the wireless router, there are 4 ports for LAN, of which 1 port is for LAN/WAN. An external 4G/LTE antenna can be connected via the 2 SMA ports. We recommend below two antennas for Huawei B525 for indoor and outdoor use:

Huawei B525 B525s-23a interfaces

An RJ11 port allows you to connect a phone on it to make calls via the inserted SIM card. (Provided you do not force the router only on the 4G so that it can switch to other voice frequencies and that your SIM package is not only in data) A USB 2.0 port connects a hard drive or printer. The SIM card must be in the MICRO SIM format.

It has a multilingual interface that you manage from your computer to configure your network quickly and easily (DHCP, VOIP, FIREWALL, consumption management etc) but is also compatible with the mobile application Huawei Mobile WiFi for a configuration via smartphones or Pads.

Huawei B525 B525s-23a label

 

The Huawei B525s-23a Router 4G has an on/off button which is to turn it off when you do not use it. Likewise, a WPS button (to connect wifi easily) and 5 LEDs will allow you to know the intensity of your 4G reception. This HUAWEI B525s-23a is the latest flagship of the brand’s 4G routing modems. At a relatively affordable price (compared to smatphones for example), you will be able to get rid of a deficient ADSL network and multiply your connection speed.

 Huawei B525 B525s-23a power and WPS button

Regarding what’s the real difference between Huawei B525 router and Huawei E5186 router, we will check later. Actually, they are too similar technically, we don’t know why the new B525 is presented when the Huawei E5186s-22a is good enough for current LTE cat6 networks.

Huawei Mate 10 — Upcoming Top Smartphone

It will take a month until Huawei will present the Huawei Mate 10 and the Mate 10 Pro in Munich on October 16, but the discussions about the new top models are already in progress. At the moment, the web is all about the design of the new Mate models.

 

In the middle of the week, a video was put into the web, in which the Mate 10 is to be seen. The short clip, however, consists only of several CAD drawings (CAD: computer-aided design), which were made on the basis of the current reports on the Mate 10. Thus, the approximate look of the upcoming smartphone should have been captured, but some details might be different.

 

We can see a smartphone with a dual camera on the back, but not surrounded by the glass inlay we know from the Huawei Mate 9. In addition, the fingerprint sensor is located on the front, which seems odd. Because at the start of the Huawei P10, Huawei explained that the front sensor would only be used on models with a display diagonal up to about 5.5 inches. All larger devices, such as the Huawei Mate 10 with its 5.9 inch screen, should be equipped with a fingerprint sensor on the back.

 

The display of the rendering images to be seen in the video is surrounded by a comparatively wide border, considering that current top smartphones on the market are nearly borderless. Even the trend ratio of 18: 9 seems not to have been respected in the illustrated model. Would Huawei not equal on the Mate 10, or the video just misplayed a wrong picture?

 

Huawei Mate 10 Pro

The fact that the Mate 10 does not seem to follow the trend could also be due to Huawei’s introduction of the Mate 10 Pro on October 16. This should correspond more to the current developments in the display. Because on previously unconfirmed live pictures, a smartphone with a nearly borderless screen and without fingerprint sensor on the front looks like Mate 10 pro. The space thus saved was invested in the display, which seems to have the well-known high-gloss format of 18: 9 or 17: 9. The display diagonal is to be slightly larger with 6.3 inches than with the Mate 10, the resolution is probably 1080 x 2160 pixels.

 

Whether one of the two new Huawei smartphones will have a curved display like the Huawei Mate 9 Pro, remains to be seen. It is already clear that Huawei’s latest processor generation Kirin 970 will be used in the models. It is the first chip system of the manufacturer with a computing unit for neural networks and thus artificial intelligence. The Kirin 970 is manufactured in a very compact 10 nanometer process and, like the predecessor Kirin 960, has four Cortex A73 cores with a clock rate of up to 2.4 GHz and four A53 cores with up to 1.8 GHz. The graphics performance has been improved and an LTE Cat.18 modem is also included.

Huawei Presents HiSilicon Kirin 970 LTE Cat18 Chipset

Huawei presented a new chipset for smartphones at the IFA with the HiSilicon Kirin 970. The Kirin 970 includes a processor, a graphics unit and a mobile radio modem. Especially in the modem, there is some progress compared to the predecessor – the Kirin 960. The Kirin 970 LTE Cat18 supports up to 1.2 GBit/s in the download. In addition, the dual SIM operation supports LTE on both SIM cards at the same time. The Kirin 970 chipset will be used in the Huawei Mate 10 smartphone, which will be presented in mid-October in Munich.

Modern LTE modem

The HiSilicon Kirin 970 is next to the first modem Qualcomm Snapdragon X20, which supports LTE category 18 of the downlink . Thus, speeds of up to 1.2 gigabits per second are possible in a correspondingly developed mobile radio network.

To achieve such high speeds, different 4.5G/LTE Advanced Pro technologies are combined. The Kirin 970 supports, for example, the 4 × 4 MIMO antenna technology and the 256QAM modulation technology. Furthermore, a frequency spectrum of up to 100 MHz can be bundled thanks to the 5CC CA (= five-factor carrier aggregation ).

There is also news about Dual SIM. So far, no smartphone was able to use both SIM slots on LTE at the same time. One of the two cards was therefore always limited to 2G / 3G usage, which is particularly annoying if only an LTE network is available. The Kirin 970 can now also run parallel in the LTE network on both SIM cards, so you can, for example, use the first SIM card to surf via LTE and use the VoLTE in the LTE network via the second card.

Processor, graphics and AI

The HiSilicon Kirin 970 is produced in the 10nm process and is to enable a better battery life than the previous model. An octa-core CPU and a 12-core GPU are integrated in addition to the described modem. The chipset should be particularly suitable for artificial intelligence applications (AI) and be faster and 50x more efficient than a classic quad-core CPU without a AI component through a combination of on-device AI and Cloud AI 25x.

HMD Global Presents New Nokia 8 Android Smartphone

HMD Global, the company behind the smartphone brand Nokia, has finally presented the first and long-awaited high-end model: the Nokia 8. Like Nokia Top models from the past years, the Nokia 8 comes with camera technology from Carl Zeiss, So that high expectations can be placed on image quality. The Nokia 8 has integrated the current Qualcomm chipset (type Snapdragon 835) and achieves speeds of up to 450 Mbps over the LTE network thanks to LTE Cat9 with 3CA.

 

Monoblock design and lots of performance

 

The Nokia 8 comes in a “monoblock design” with capacitive buttons according to the HMD Global and has been designed in such a way that the device not only looks good and is well in the hand, but also dissipates heat optimally. The display is 5.3 inches in size and has a very high resolution of 2560 x 1440 pixels (WQHD). With 700nts, it should also be very bright. The integrated battery is 3090mAh strong and not changeable by the user. It has the Qualcomm QuickCharge 3.0 quick-release feature.

 

The integrated memory is 64 GB in size and can be extended by up to 256 GB via MicroSD memory card. The memory is 4 GB. With the wireless interfaces, the Nokia 8 is very up-to-date, including support of Bluetooth 5.0 and WLAN 802.11ac. The USB Type C interface is especially fast thanks to USB 3.0 and 5Gbps support. Unlike some other high-end smartphones, a 3.5mm headphone jack is also on board.

 

Zeiss camera

 

The Nokia 8 is equipped with a dual camera system with Zeiss optics on the back. Both sensors have a resolution of 13 megapixels, the primary sensor takes up color and is equipped with an optical image stabilization, the secondary sensor takes pictures monochrome. The aperture is f2.0. There is an infrared distance meter as well as a dual-tone LED flash. The camera on the front comes with almost the same data (13 megapixels, f2.0), but has no optical image stabilization. The Nokia 8 has a special feature integrated; here the image of the front and the rear camera is simultaneously recorded. The feature can even be used for streaming networks such as Facebook and YouTube.

 

Software: “Pure Android”

 

HMD Global is working as an operating system to use a current and almost unchanged version of Android. Pre-installed Android 7.1.1, the manufacturer promises monthly security updates. Through the pure Android, the device is supposed to offer a better user experience than comparable high-end models from other manufacturers. This could be an important purchase point for some users, as many other manufacturers such as Samsung and Huawei often criticize the overloaded and advertising apps blocked user interface. Disadvantage of “Pure Android” might be that certain functions are not present through the pre-installed user interface. But it is always an option for Android.

 

Availability

 

The Nokia 8 is to be offered from September 2017 in the colors Polished Blue, Polished Copper, Tempered Blue. In addition to a single SIM version, a dual SIM version of the Nokia 8 is also available, but it can be assumed that HMD Global will market the dual SIM version only via the free trade and not through providers and network operators.

 

Samsung Galaxy Note 8 LTE Cat16 Smartphone Released

Samsung has introduced the Galaxy Note 8 in New York few days ago. The smartphone is equipped with a modern LTE Cat16 modem and allows speeds of up to 1 Gbit/s in appropriately equipped mobile networks. In addition to the standard version, a dual SIM version is also officially available in some areas, which is in the note series for the first time. The other technology includes a 6.3 inch display, a dual camera and 64GB internal memory.

 

Case with Infinity Display

The Galaxy Note 8 looks similar to the Galaxy S8 Plus, it is only slightly more angular than the sister model. The display is 6.3 inches in size, has an aspect ratio of 18.5: 9 and is rounded off to the sides, which is already known from the Galaxy S8. The resolution is 2960 x 1440 pixels (QHD+). Since the edges on the sides as well as the top and bottom were kept as narrow as possible, Samsung applies the display as “Infinity Display”. An important difference to the Galaxy S series is, of course, the S-Pen input pen, which is simply part of the Samsung Galaxy Note series.

 

The case of the Samsung Galaxy Note 8 is dust and water proof according to IP68. With 162.5 x 74.8 x 8.6 mm, the Galaxy Note 8 is quite large, but still makes a slim figure compared to other devices from the 6-inch category. The weight is 195 grams.

 

Dual camera system

A further novelty compared to its predecessor Galaxy Note 7 and the Galaxy S8 is the dual camera. The Note 8 has two camera sensors each with 12 megapixel resolution, one with wide-angle lens and one with a kind of tele-lens, so that like the Apple iPhone 7 Plus, a certain zoom can be achieved. The aperture of the wide-angle lens is f1.7, the telephoto lens has a diaphragm of f2.4. It is worth mentioning that both sensors have optical image stabilization (OIS).

 

Fast processor with Android 7.1.1

As a chipset, a Samsung Exynos 8895 is used in the European version of the Samsung Galaxy Note 8, the memory is 6 GB. About 51 GB of the internal 64 GB memory ex factory for the user are available, a memory extension via MicroSD memory card is naturally possible.

 

In addition to Gigabit LTE of the category 16, of course, all other current radio technologies are on board, just as one expects it from an expensive high-end smartphone. The Galaxy Note 8 supports WLAN 802.11ac with MU-MIMO antenna technology, it can support VoLTE (voice over LTE) and WLAN calls and it supports Bluetooth 5.0. Android 7.1.1 is used as the operating system.

The battery of the Galaxy Note 8 is 3.300 mAh and can be charged both via USB Type C cable as well as wireless. A quick-charge mechanism is supported for both cordless charging and normal charging.

 

Dual-SIM Available

The Samsung Galaxy Note 8 comes in September. While only a single SIM variant will be available in the free trade for network operators, a dual SIM version can be pre-ordered in the Samsung Online Shop. Currently, the price of Samsung Galaxy Note 8 is at high side. If you can wait a few months, you will be able to benefit from a significant drop in prices.

Huawei B618 Status Icons

Using the status icons, you can discern the operating status of the Huawei B618 4G Router.

The following table describes the icons displayed in the upper right corner of the Huawei B618 4G Router user interface.

Item Status
SIM/USIM/UIM card : The SIM/USIM/UIM card is faulty; PIN/PUK is not verified.NOTE:

·         Contact your service provider to check whether a SIM/USIM/UIM card is required.

·         The SIM/USIM/UIM card is provided by your service provider. To find out more about the card, contact your service provider.
Internet : Uploading data

: Downloading data

: Uploading and downloading data simultaneously

 : A dial-up connection has been set up, but no data is being transmitted.
WLAN : WLAN enabled.

: 5G WLAN enabled

: The indoor 5G WLAN is enabled.

: WLAN disabled.
Signal : These icons indicate the signal strength from weak to strong.
SMS  : New messages.

: Your local inbox is full.
Ethernet : The Mobile Broadband is connecting to an Ethernet network.

: An Ethernet connection is detected.
Update : Update available.

 

 

Check more details about Huawei B618 4G Router here: https://www.4gltemall.com/huawei-b618-lte-cat11-router.html