New Products Archives – Page 31 of 56

TP-LINK M7650 LTE Cat11 Mobile WiFi Hotspot

Internet is now very important for our daily life. So there is a great demand of gadgets for wireless connection from users. The alternative of using a mobile phone as a WiFi access point or modem is not always comfortable, and when running this function, the mobile phone may consume much battery that cannot always afford. TP-LINK gives us another option for wireless connection: TP-LINK M7650 4G LTE WiFi Router.

This TP-LINK M7650 is a new mobile pocket WiFi router upgrading from its predecessor TP-Link M7350 and is compatible with the standard LTE CAT11, which allows speeds up to 600 Mbps. It’s the most attractive feature on M7650 MiFi which also uses the protocol WiFi AC to work with the bandwidth of 5 GHz, less congested and more stable. The TP-link M7650 is compact to carry smoothly in your backpack or briefcase and with a battery of 3,000 mAh to use throughout an entire working day.

The TP-LINK M7650 is very interesting for professionals who regularly work with your laptop outside the office, and it’s a great partner for travel. This portable WiFi router can insert a SIM data card and start connecting with the Internet in just seconds. This versatility is very useful as an alternative to using our own smartphone as a WiFi access point. The TP-LINK M7650 is based on Qualcomm chipset and compatible with the network 4G CAT11, with maximum speeds of up to 600 Mbps. So multiple devices could connect to TP-Link M7650 and surf in high speed. The maximum supported user could reach to 32 terminals.

This means that the M7650 Mobile WiFi is ready for the future, because currently the main operators could only provide top speeds of 300 Mbps. In addition, another advantage of TP-LINK M7650 is compatible with the network protocol WiFi AC. This protocol works simultaneously on both the bandwidth of 2.4 GHz and 5 GHz. This first width of 2.4 GHz is used by the vast majority of devices. However, the main problem is that it is very congested. This causes interference and loss of signal quality. Meanwhile, the bandwidth of 5 GHz is faster and more stable. The maximum speeds supported by the TP-LINK M7650 are 300 Mbps bandwidth in the 2.4 GHz and 867 Mbps in the 5 GHz.

tp-link-m7650-2

Today, most launched mid- range and high-end devices, including smartphones and tablets and laptops, already incorporate support WiFi AC. The TP-LINK M7650 uses a compact design to smoothly take in trips and journeys. Within the design of the TP-LINK M7650, we must highlight the small screen from which we can view key data as the connection speed at which we are transmitting data, consumed data, the number of connected devices or the status of the battery.

tp-link-m7650-3

Speaking of battery, this model integrates with a capacity of 3,000 mAh that helps us work throughout the whole day without having to worry about power-off. And there is an option to expand the internal space to save files directly to the access point through a MicroSD memory card up to 32 GB. Users connected with the M7650 could share the files freely.

Here now, we only know the Netgear Aircard 810s has similar specifications to TP-Link M7650 mobile WiFi hotspot. And the aircard 810s is already available for Australia network provider Telstra. TP-link M7650 would be available for Spain carrier. We would update the news on www.4gltemall.com once it’s available here.

Netgear Aircard AC785 4G Hotspot Review

Netgear new mobile router “AirCard AC785” that corresponds to the 3G/LTE was released months ago. It’s a upgraded model from Netgear aircard 762s and with a new design, the aircard 785 looks fashion and cool.

So, let’s look at the product. Body size, 109.9mm (length) × 68.9mm (width) × 14.6mm (height), weight has become 127g, as a 4G mobile router, the Aircard 785s is easy to take in a pocket. The device is in black color. Although it has a simple structure, the designed accent triangle piano black so as to surround the front of the display, and fine irregularities is placed on the surface; it receives a quite elaborate impression.

netgear-aircard-785s-8

Buttons and connectors are listed on a side surface, the navigation buttons to be used to select the setting items on top of the power button and micro USB ports for charging & PC connection and two antennas connectors at the lower port are provided. Attention, but the antenna port is to show up by sliding.

netgear-aircard-785s-7

If you want to use the network from the Netgear aircard 785s, a SIM card needs to be inserted by removing the back of the cover. Open the cover, and remove the battery of 2000mAh, but there is no Micro SIM slot, only SIM card slot shows up.

netgear-aircard-785s-5

Netgear aircard AC785s supports 4G LTE frequency bands (800/850/900/1800/2100/2600MHz) and 3G HSPA+ bands (800/850/1700/2100MHz), it can be used with many network providers in Europe and Asia. Unlike the mobile router that is provided by the operators, the aircard 785s could be used with any operators. Actual usage is not very difficult. But it is necessary to do the setting called “APN” in accordance with the network operators; it can be set from a PC or smart phone.

netgear-aircard-785s-2

In the case of the PC, Aircard 785s can be set using the browser, but if you want to configure from the smartphone, you need download the Netgear Aircard App first from the Google Play or App Store. By the way, the AirCard app is also available Windows Phone version. Once you have the app installed, you are ready for connection to the AirCard AC785. After the power is turned on, connect the smartphone in the wireless LAN using such as WPS. After connection, when you start the AirCard app, it is possible to do the settings in the “APN” of the “Network”.

netgear-aircard-785s-1

2.4GHz connection is standard

Using the wireless LAN function to connect a smartphone or PC, the maximum speed will be 300Mbps in 2 x 2 MIMO support of IEEE802.11n. In the standard, user can switch the 2.4GHz to 5GHz, and the AC785S can also be switched to the simultaneous use of the 2.4GHz/5GHz.

The feature that allows this simultaneous use is the very unique features of this product. In a typical mobile router, there is a case to switch the 2.4GHz or 5GHz exclusively, in this Aircard 785s, both the two bands can be used at the same time. Therefore, even if the number of connection is increasingly, by distributing the terminal connected to the 2.4GHz and 5 GHz, it is possible to disperse the traffic. In the setting from the main display, the 2.4GHz / 5GHz both use the same SSID, it can be set individually by using the Setup screen to be the “main Wi-Fi” and “secondary Wi-Fi”.

netgear-aircard-785s-4

However, I want to note one is the limit of the 5GHz band. In this netgear AC785S, the channels of the 5GHz band has become a W52 of 36/40/44/48, this band is prohibited outdoors (outdoor of available W56). If you want to use indoors at home or conference room, you can take advantage of the 5GHz band in full.

Further, in the Aircard 785, in order to extend the operating time on battery, the standard radio wave output of the wireless LAN is set low. For battery life, it was subjected to a test of 7 hours 24 minutes in a row. The battery capacity is 2000mAh large and as a mobile router, the measured result of more than 7 hours is not bad, but decent. In default, the brightness of the screen is set to “bright”, and the screen could be set to blink the entire surface of the LED during the communication is enabled. By adjusting these settings, it would also be possible to extend a little more working time of the netgear AC785S.

netgear-aircard-785s-3

Affordable mobile router

The Netgear mobile router “AirCard AC785” is with a reasonable price, and with a solid basic design, a bargain impression. Considering the growing needs that want to use in a variety of equipment such as a PC or a tablet, it’s likely to say that Netgear aircard 785 is quite easy-to-use. Some customers may say that their smartphone can also work like a 4G mobile router, that’s right, many smartphones have the same functions, but considering the power consumption when activating the Hotspot function, an extra mobile pocket router may be necessary in most cases.

Actually, Netgear has also presented many new 4G mobile hotspots with high level, such as LTE Cat6 Mobile Hotspot Netgear Aircard 790 and Latest LTE Cat11 mobile hotspot Netgear Aircard 810s. If you prefer to the latest units with future-proof, you can consider the Aircard 790s or Aircard 810s.

LTE Cat6 CPE ZTE MF286 VS Huawei E5186

With the evolution of the wireless network technology, more and more network providers are trying to upgrade their LTE network to LTE cat6 advanced, so more and more users demand LTE terminals to support the latest LTE advanced networks. Even though, very few user equipments can meet the demand.

We had introduced the world’s the fist LTE Category 6 router Huawei E5186, now we get the new LTE Cat6 gateway ZTE MF286. As ZTE’s first LTE Category 6 router, the MF286 has many functions, even the appearance/interfaces design similar to LTE CPE E5186, but it also many special features. Today, we will have a check the difference between the two 4G LTE Routers.

Appearance

The ZTE MF286 and Huawei E5186 both looks like a common stationary wireless home router, front indicators to show wireless connection status (Power, Wifi, Phone, 3G/4G, Battery, Signal), side gridding design to heat radiating, and interfaces (4 x RJ45 ports for WAN/LAN, 2 x RJ11 ports for VoLTE and telephone, 1 x USB port for storage and power adapter plug). And there are two connectors for external antenna in the two routers but the connectors are covered by a small cap in case dust and water. And the WPS button and reset hole line together. Of course, there is one SIM card slot in the two routers.

Technical specifications

The two routers can work well with FDD & TDD LTE networks. As wireless gateways for LTE Cat6, they both could achieve download speed to 300mbps and upload speed to 50mbps on LTE FDD networks. And the download speed could reach 112Mbps on TD-LTE networks. If LTE network is not available, they can automatically switch to 3G UMTS/WCDMA network or 2G GSM networks. And the peak download speed on 3G network is 42Mbps.

huawei-e5186-vs-zte-mf286-interfaces

ZTE MF286 and Huawei E5186 4G Router both could support the IEEE 802.11a/b/g/n/ac with dual bands (2.4GHz and 5GHz). Up to 64 devices could connect to the MF286 and E5186 LTE CPE respectively. And they both support VoLTE function, which is required and practical on the LTE Advanced network. The management of the two routers can be done via the web UI. Users can do personal settings for Ethernet, WLAN, VoIP, Security, Port Forwarding, MAC/LAN IP filter, DHCP, DMZ, SIP ALG, UPnP, NAT settings etc in web UI.

But we can also see the difference between the two similar 4G Router:

The chipset of the Huawei E5186 is Huawei own Hisilicon Kirin while ZTE MF286 is based on Qualcomm chipset Qualcomm WTR3925 (28nm process) and Qualcomm MDM9230 (20nm process)
There is no battery in Huawei E5186, it can only work when connect to power adapter. However, the ZTE MF286 has built-in battery with 3000mAh capacity, which can support a conference call for up to 4 hours.

ZTE MF286

The two points should be the key difference between the two routers. Below are the details comparisons for the two routers on features and specifications for reference:

Model	ZTE MF286	Huawei E5186
Type	Stationary & Portable Router	Stationary router
Category	LTE Cat6	LTE Cat6
Network technology	TD-LTE/FDD-LTE/DC-HSPA+/HSPA+/ UMTS/EDGE/GPRS/GSM	TD-LTE/FDD-LTE/DC-HSPA+/HSPA+/ UMTS/EDGE/GPRS/GSM
4G Speed	* LTE-FDD DL 300Mbps/UL 50Mbps * TD-FDD DL 220Mbps/UL 10Mbps	* LTE-FDD DL 300Mbps/UL 50Mbps * TD-FDD DL 220Mbps/UL 10Mbps
3G Speed	DC-HSPA+ DL up to 43.2Mbps	DC-HSPA+ DL up to 43.2Mbps
WiFi	IEEE802.11a/b/g/n/ac(2.4GHz and 5GHz)	IEEE802.11a/b/g/n/ac(2.4GHz and 5GHz)
MIMO	Yes	Yes
Max users	64	64
Interfaces	2 x RJ11 + 4 x RJ45 + 1 x USB + 1 x SIM slot + 1 x Power plug + 2 x connectors for antennas	2 x RJ11 + 4 x RJ45 + 1 x USB + 1 x SIM slot + 1 x Power plug + 2 x connectors for antennas
Battery	Yes, 3000mAh	No
VoLTE	Yes	Yes
Other features	CSFB, HD Voice, Web UI, IPV6, WPS	Firewall, CS Voice, VoIP, VoLTE, TR069 Remote Management, HTTP Online Upgrade, QoS, USB Share, UPnP, IPV6, DLNA, Fax, Print, VPN
Dimensions	180 × 170 × 30 mm	190 mm × 200 mm × 32 mm

If you like the two LTE Cat6 routers, welcome to check www.4gltemall.com .

ZTE MF286 4G LTE Cat6 Wireless Router Review

With the development of LTE network technology, more and more network providers are trying to upgrade the network to LTE advanced with carrier aggregation. Then more and more users are demanding for LTE Cat6 equipments so as to achieve possible fast downlink and uplink speed. Finally, ZTE presents its first LTE category 6 wireless router since Huawei had its LTE cat6 router E5186 and E5175 on sale for long time.

ZTE MF286

Built-in battery for Mobile Use

ZTE MF286 looks similar to the traditional wireless home router, but in this new router, ZTE had designed a built-in battery so that users can not only use the MF286 as a stationary router at home, but also take the MF286 router outdoor for mobile use. With the 3000 mAh battery, ZTE MF286 can support a conference call for up to 4 hours or share a 4G network for up to 3 hours. It can’t be taken in a pocket like ZTE MF970 LTE Cat6 MiFi, but it’s useful for multiple devices’ network support.

ZTE MF286

High-speed 4G Connection

Like the Huawei 4G LTE Cat6 routers, ZTE MF286 can achieve peak download speed to 300Mbps and upload speed to 50mbps on LTE networks. The speed is almost the double of the current speed on LTE Cat4. If user downloads a movie of 1GB, it may only take few seconds on this speed. ZTE MF286 Router can achieve this due to the Qualcomm WTR3925 RF transceiver chipset based on the 28 nm process with the Qualcomm MDM9230 modem based on the 20 nm process. The new chipsets perform better and consume less power than its predecessors.

Dual-band WiFi and support for 802.11ac

Compare with the current home routers, ZTE MF286 CPE has almost the highest level to support WiFi 802.11b/g/n/ac and 3 x 3 multiple-input multiple-output (MIMO) technology with three spatial streams for maximum performance. It operates on both 2.4 GHz with great wall-penetration capabilities and 5 GHz with a lower chance of picking up interference. The powerful gadget also supports gigabit wired connections so that it is possible to copy files over a LAN at a speed higher than 80 MB/s.

In the test, ZTE MF286 proves to have good signal coverage; it can cover an office larger than 500 square meters. The signal attenuation is not obvious even at a point far from the device. Internet surfing is smooth, even in a meeting room separated by glass doors.

ZTE MF286

High-Definition VoLTE Call

Conference calls are an indispensible part of business interactions. As a standard feature for high-end wireless routers, ZTE MF286 supports advanced VoLTE voice calls. You can connect it to a telephone or a conference hands-free telephone system to get a much better call quality than regular telephone calls.

With 4 RJ-45 Ethernet ports, there is a USB port which connects a USB disk to share pictures, files or videos among the users on the same WiFi network. As ZTE’s first 4G LTE Cat6 router, the MF286 Router has many selling points which are practical for users. But Huawei E5186 has been on the market almost one year ahead of ZTE MF286, we can’t tell whether the MF286 will gain the trust from customers even though Huawei E5186 CPE doesn’t have the battery.

ZTE MF903 4G Pocket WiFi Review

Following the steps of the competitor Huawei, the Chinese Telecom equipment vendor presents a new 4G Mobile WiFi Hotspot named ZTE MF903, which is very similar to Huawei Mobile Wifi Pro E5770. The Huawei E5770 mobile hotspot was proved to be a powerful portable 4G router with multi-functions. And ZTE MF903 copied almost all the features and comes to be a budget option for users.

ZTE MF903 LED indicators

The appearance of ZTE MF903 is not like E5770, which has a small screen to show full connection status when working. The MF903 has only a few indicators about battery, WiFi, message and signal. The left side of the indicator is ZTE logo and the right side is power button.

If you had read our introduction of Huawei E5770 hotspot, you may know the interfaces/ports are covered by a small tap, under which there are there ports for Ethernet cable, USB in and out. (If you want to know more about Huawei E5770, click here.)This design could protect the ports form dust. But the ports are open to air in ZTE MF903 hotspot. The lucky thing is the Sim and SD card slots are protected by a cover. The reset hole is at the side of SD card slot.

ZTE MF903 interfaces

ZTE MF903 is using ZX297520 while Huawei E5770 is based on Huawei Hisilicon chipset. Both of them can provide same functions. They can transfer the 4G wireless network from a SIM card to WiFi signal so that the connected devices via WiFi could access internet. This can make true of when user insert SIM cards to them. But if users connect an Ethernet cable to them, they can also transfer the network from Ethernet to WiFi, after connected with the WiFi, user can also surf freely. The only difference on this is that Huawei E5770 could support up to 11 users while MF903 support only 8 devices.

ZTE MF903 charge smartphone

The shinning point of the two mobile hotspots is the large battery capacity, which would not only keep themselves long-time working but also charge other electronic devices such as mobile phones, tablets, game terminals etc..

ZTE MF903 SIM and SD card slot

Regarding the technical specifications, ZTE MF903 and Huawei E5770 both support the LTE category 4 technology and could achieve download speed to 150Mbps and upload speed to 50Mbps. Both can work well on TD-LTE and FDD-LTE networks but it depends on the specific model number. And the download and upload speeds are theoretical under perfect environment, in practice, the speed can’t reach these speed due to network congestion or far distance to the cell tower. But they can also work on UMTS network if 4G LTE network is not available. What’s more, they both can be controlled by APP. For ZTE MF903 to use ZTELink while for Huawei E5770 to use Huawei mobile WiFi app. User can also manage the settings through web UI in the browsers.

ZTE MF903 back label

From the appearance and technical features, we can’t tell which one is better. But we think the Huawei E5770 would be at higher price than ZTE MF903 due to the Huawei’s brand reputation and quality trust from customers. We will do a network connection test next to see which one is better in performance.

Netgear AirCard 790 4G Mobile Router Review

Now that most cell phones have features to share the wireless Internet connection, such routes may be convenient if there are multiple users to share a mobile broadband connection.

Many wireless routers for mobile broadband are either locked to a specific carrier, or they have quite a few limitations. Netgear new 4G router Aircard 790 is not locked to any carrier, which supports most frequency bands and could be used around the world, and the Netgear 790S is so packed with features that we have not seen in any of other similar routers that are usually offered from operators themselves.

The router AirCard 790 is slightly smaller but thicker than a mobile phone. Here are our first impressions:

Supports 4G in Category 6

The user interface is easy to use via the touch screen.

Netgear AirCard 790 price is better now than few months ago since the successor Netgear Aircard 810s is available now. Netgear 4G routers are much more advanced than the average router. The Aircard 790 support 4G (LTE) Category 6, thus speeds up to 300/50 Mbps. And when you share mobile network, the WiFi standard is made via dual-band 802.11ac at both 2.4 and 5 GHz simultaneously. Up to 15 devices can connect to the router simultaneously, and you can easily set up a guest network.

Handsome touchscreen

The Netgear AC790S router is very easy to use. After you’ve installed your SIM card and turned on the router, the network name (SSID) and wifi password will show on the screen. You can easily enter and change settings directly from the touch screen of the router. And enter http: //netgear.aircard in the browser on your PC, you can possibly manage the AC790S Router wirelessly.

The touch screen is incredibly handsome, which allows you to do everything you normally need in a browser user interface, and in a very intuitive way. Via the screen, you also have an overview of how much data you’ve used. You can also see which devices are connected to the router, limiting the number of units, and optionally block unwanted devices.

There are two connectors for an external antenna.

Battery life is rated at 11 hours, and you can select the transmitting power of WiFi network so you can save energy if you use the router at a short distance. You can of course use the router by connected with the USB to PC. Otherwise, the router can also be used wireless for your mobile phone.

We mentioned that the router can be connected to an external antenna. Netgear even sells an antenna to increase antenna efficiency by up to 50 percent. We 4gltemall.com also provides suitable budget external antenna for Netgear Aircard 790s which had been used by many users and proved to be reliable: http://www.4gltemall.com/4g-antenna-two-ts-9-connector.html

Conclusion: A super router

In all, we have a very good impression of Netgear AirCard 790. We have used it a little while when commuting by train, and the AC790S router has served impeccable. It does not get much more via the Internet sharing feature in your mobile phone, but with the mobile broadband Netgear 790s, users can do much more than expected. What’s more, it save much power consumption for mobile phone.

Netgear Aircard 810 – World’s Fastest 4G LTE Mobile Hotspot

Netgear has launched a new mobile hotspot AirCard 810 on the market. The device has been shown in January at the Consumer Electronics Show (CES) in Las Vegas. Now it is also available in this Australia for the network provider Telstra and named Telstra WiFi 4G Advanced III, and Netgear 810 is visually similar to its predecessor Netgear AirCard 790. However, the new model Netgear AC810S has some additional features that we will test in more detail.

Netgear aircard 810s front

The most important change is the support for LTE Cat. 11, which means the mobile Wi-Fi hotspot can support mobile data transfers at up to 600 Mbit/s, a speed that the bundling of three 20MHz and distribute a UMTS or LTE-based Internet access to up to 15 devices. Thus, the aircard 810 is currently the fastest mobile hotspot on the market.

In many countries, such high speeds of the mobile network are not yet available. However, the current mainstream providers offer top speeds of 300 or 225 Mbit/s over 4G networks, which achieve higher maximum data rates for mobile Internet access. Now Netgear AirCard 810 seems to be a corresponding future-proof device.

netgear aircard 810 package content

2G Network Support is Missing

However, the aircard 810 is not perfect actually. Although top speeds over LTE are made possible and also in the UMTS networks downstream possible speeds are up to 42 Mbit/s due to DC-HSPA technology, netgear 810s can’t access to the GSM, GPRS and EDGE networks. The 2G access should be at least a basic supply for use in geographic areas, where simply no UMTS or LTE expansion exists. The distribution of an already very slow Internet access via WiFi to multiple other devices is certainly less sensible. The Netgear AC810S router can be but also connect directly via USB to a computer and then used as a wired modem for internet access.

netgear AC810S home

Another interesting innovation compared with the Netgear AirCard 790 is the ability to not only redistribute a mobile Internet access, but also an existing wireless network. The Aircard 810 router can ensure for better reception as a repeater, especially work as a hotel hotspot and similar Internet-access distributed over several devices.

Netgear Aircard 810s sim slot

A big advantage over Aircard 810s mobile hotspots from other manufacturers is the ability to make many settings directly via the touchscreen. Quick SSID or change the password? No problem. After inserting a new SIM, the Internet settings do not have to be entered manually. This could also do directly on the touch screen.

Netgear Aircard 810s Antenna connectors

The Netgear 810 touchscreen dimensions of 112 x 69 x 15.5 millimeter are also one of the main criticisms over its predecessor: The display reflects very strong. It also takes fingerprints on unusually strong, which looks ugly if intensity of use and you do not wipe the screen clean repeatedly.

About the screen, the most important is that not all operating steps for Netgear AirCard 810 are accessible. Those who need access to all settings can use the web frontend via the Internet browser of a connected computer. Here, for example, Wi-Fi hotspots also can be set to be redistributed to the Netgear handheld. Once set, the AirCard 810 automatically uses one of the configured hotspots instead of UMTS or LTE as soon as one of the wireless access is received.

Apps for almost all smartphones and tablets

Another possibility to adjust the configuration of the Netgear aircard 810 router is the Netgear APP. Netgear offers Mobile Apps for Android, iOS and Windows Phone. Network access is naturally only possible if the smartphone or tablet is connected to the mobile hotspot. The Netgear AirCard 810 weighs 132 grams, making it even four grams lighter than its predecessor. Above all, the device is easier to handle and lighter than many current smartphones. The handheld is completely pocket-fit. It is important to remember that cell phone coverage and wireless range suffer if the unit is operated close to the body.

We have tested the Netgear AirCard 810 in mobile networks. The reception was well in both LTE and the UMTS field network. By eliminating the 2G, the Aircard 810 router connection has often still held to UMTS or LTE network in less-served regions, without the need for manual adjustments. In LTE 1800 network, we came up data transfer rates of 120 Mbit/s downstream. This is a good value. But we could not test Carrier aggregation at 1800 and 2600 MHz.

Netgear Aircard 810 web interface (2)

WLAN at 2.4 and 5 GHz

The Netgear AC810S router sends the default wireless frequency range of 2.4 GHz, as an option, 5 GHz is also available. Moreover, it is possible to establish also a guest mode. Compounds can be easily prepared by WPS. The range of the hotspot is considerably higher than that of the Huawei E5372, which we used for comparison. It is important to remember that it is not a very recent model of the Huawei MiFi.

The battery of the Netgear 810s hotspots has a capacity of 2930 mAh. The manufacturer promises eleven hours operating time. We have achieved more than ten hours in practice. Particularly pleasing: Unlike many competitors, aircard 810 allows the battery exchange also. Also interesting is the possibility to use the mobile hotspot as a battery pack, such as a smartphone entrained recharge.

Conclusion:

The Netgear AirCard 810 is not cheap now at www.4gltemall.com. This is a device that has convinced functions during the test even after long hours of continuous operation and thanks to LTE Cat. 11, the technology dominates the near future. The MiFi is well made and is pocket-fit. If required, connect an external antenna.

The pity is the lack of GPRS and EDGE. Another criticism is the supported LTE frequency ranges. Although all common in Europe bands are covered, it lacks some LTE frequencies for the American market, so you may only use 3G network in American areas with the Aircard 810. But in all, the Aircard 810s is a very good mobile router to commend for travelling over the world.

Netgear AirCard 785S 4G Mobile Router Review

If you need the Internet to work or surf on the road, there are many mobile hotspots available now to provide good solution. We’ve put Netgear AirCard 785S to the test in recent weeks. The portable WiFi hotspot for 4G Internet is useful for all our connected devices and keeps working a whole day without any trouble.

Small (11 x 7 x 1.4 cm) and lightweight (125 grams including battery), fits easily in a pocket. The whole body of Aircard 785 is made of high quality plastic and is extremely easy to use as it has only two buttons: ON/OFF to switch on and switch off the router, and a navigation button to scroll through a few simple options that can be activated directly from the device without interfacing through smartphone apps or web panel. There is in fact a small LCD display (3.5 x 3 cm), which focuses on all the key data and allows you to choose between different modes for use with a few clicks.

At the opposite edge to that where we find the two buttons, the microUSB input are located for charging the lithium battery of 2,000 mAh (removable) and two sockets for connecting external antennas, available separately and useful – but not essential as we will demonstrate through our testing – to increase the power and reach of the signal. The back cover is removable and there is the microSIM slot below the cover.

Display

On the LCD screen of Netgear Aircard 785, usage data, WiFi name and the WiFi password are shown. This means that those who are nearby and peers on the screen can potentially find out the password to access and leverage your data plan. Since the information on the screen cannot be hidden in any way, and whereas power on, the screen will remain active for 30 seconds (default timeout is 1 minute), it is perhaps advisable to turn the router while using in public places.

In addition to this information, the Netgear AC785S screen will also show some icons, specifically the classic 5 bars that just like on mobile phones, shows the signal strength; 3G/4G symbol to know at a glance the type of network to which you are supporting; the WiFi symbol with a number overlay that represents the number of connected devices; the two arrows to learn about the data transmission activity in real time; any envelope to indicate the presence of unread messages; and the battery indicator.

In our view, the lower portion of the display, if configured, allows you to monitor your data consumption in practice. If you’re using a monthly subscription, you can select the day when you renew your subscription and know at a glance and in real time the precise GB consumed from day one.

Configuration

Inserted the SIM card into the Aircard 785s, connected the battery and close the cover, it just has to turn on the router by pressing the ON/OFF button for a few seconds. In just around 10 seconds, it will be immediately ready and connected to the Internet. Unlike the successor Netgear Aircard 790, the aircard 785s can’t be operated via screen.

At first, it is advisable to change the default password for your Netgear 785 Mobile WiFi, thus making sure that no other device in the vicinity can connect to the network and use their data subscription. To configure the router, you must first connect to it with a device via WiFi. At that point, you can follow two paths: you can download the application Netgear Aircard App to your smartphone or through any browser (including mobile), go to the address http: //netgear.aircard/.

Netgear Aircard 785s HOTSPOT

Then you log in to the administrator panel. The default password is “password” and, like that of WiFi, it is advisable to change it from the first access so as to prevent connected users to do the settings.

We tried both systems and we preferred access via the web panel, which we thought was immediately simple and straightforward. The application interface, on our iPhone 6 Plus, it is not optimized for this display appears overly large, but it works without problems and offers quick access to all the desired functions.

Functions and settings of the router

In addition to changing passwords for the Netgear AC785 Aircard, access to the panel can be useful for reading text messages without having to remove the SIM card to insert it into a cell. Experts can also customize every detail, however, in our tests we have found that in fact, the system automatically recognizes the card operator and set the correct parameters automatically.

From the 785s aircard Settings panel, you can select the language, choose the screen brightness and display timeout, enable or disable the LED indicator and decide after how many minutes/hours of downtime the router can automatically turn off WiFi to save battery. You can also export all configurations jack to a file so that, as a result of a possible recovery, you can re-import them with a click without having to again lose time sifting through the various panels. We enclose a photo gallery where you can take a look at all the functions accessible via the web panel.

Field tests

We used the Netgear 785s router every day for more than a month, and when connect MacBook, two iPhones and an iPad simultaneously, we didn’t ever encounter any problems. The connection to the Aircard 785 was always stable and high performance, even when the router was located on the opposite side of our small apartment.

We have also tried the external antennas, but only with router and no extra accessories, about 15 meters away and with two walls to separate the connected devices, the testing terminals had continued to function without too much trouble. Specifically, the reception of the WiFi signal was obviously weaker, the response in navigation proved slightly slower but still quite functional and useful to allow us to work smoothly.

The optimal working condition on Mac was in the same room without walls to separate them, even at more than 5 meters away. Here, the reception is always optimal, and thanks to 4G connectivity guaranteed by our membership, on many occasions, the speed through Netgear 785 aircard is even faster than the ADSL line of our house.

Conclusions

The Netgear AirCard 785S provides the most convenient solutions to have a 4G hotspot in your pocket and connect all mobile devices. And it’s the ideal choice for those who must work on the computer while traveling, for those who are on vacation and want to offer Internet to the whole family, but also for those who have a WiFi iPad and do not want or cannot take advantage of the hotspot mode for iPhone to connect to the Internet.

Among the Aircard 785s features, we liked the most is the Guest mode that can be activated directly from the router with a few clicks by the instructions on the screen. In practice, the Guest WiFi can offer temporary access to the Internet for a friend without telling your master password. The Aircad 785s is really recommended for your mobile network partner!

Samsung Presents New Galaxy Note 7 Smartphone

A few days ago, Samsung introduced its flagship smartphone the Galaxy Note 7 for the second half of 2016. Since the predecessor Galaxy Note 5 and Note Edge have been available for only short time, the Note 7 is finally again officially available in many markets. The Galaxy Note 6 will not be seen, Samsung skips these numbers for the same name for the Galaxy A and C series. Technically, users can get the Galaxy Note 7 at modern features, for example, a high-quality camera, an iris scanner, a fast processor and a very large internal memory. The display is rounded off to both sides.

Galaxy Note 7 with edge display

The display size of the Samsung Galaxy Note 7 is just 5.7 inches, and is slightly rounded down at the sides, as you already know it from the Galaxy S6 edge and Galaxy S7 edge ago. The resolution is 2560 x 1440 pixels and is the same to the predecessor models. A version with a flat display does not exist. The body of Galaxy Note 7 consists of both front and rear glass and is protected against dust and splash, and Samsung has made the Note 7 on the certify IP68.

The back camera of the Samsung Galaxy Note 7 triggers with 12 megapixels. This is a rather low resolution comparatively with the Galaxy S7, but in Note 7, the Dual Pixel technology is used, which is particularly sensitive to light and therefore to take good pictures in low light conditions.

Battery and USB Type C

The Samsung Galaxy Note 7 battery is 3,500 mAh strong and not replaceable by the user, because the battery is permanently installed in the smartphone. For recharging and connection to the computer and other devices, a USB Type C port is used for the first time while in previous Samsung device, there was Micro USB. Of course again, a pen for operation and for drawing, can be recessed into the smartphone.

Installed iris scanners

It’s the first time for Samsung smartphone to install an iris scanner. A fingerprint sensor is also built, which should be able to easily unlock the Galaxy Note 7. But security should be much better at Iris scanner. Here we should wait the first user’s report about whether the response is really as fast, simple and reliable as Samsung promises.

LTE Advanced cat12

Samsung has the Galaxy Note 7 equipped with a modern chipset, a 64-bit Exynos comes with eight-core processor for use, and the 6 gigabytes RAM are available. The internal memory of 64 gigabytes is available and expandable up to 256GB, which is the largest available microSD currently.

The modem in the Samsung Galaxy Note 7 may support LTE with up to 600 megabits per second in the downlink (LTE Advanced cat12). This is made possible by bundling up to 3 frequency ranges (3CA). In Germany, Vodafone has recently launched LTE CAT9 with 3CA at up to 375 Mbit/s possible. Of course, the modem is also backward compatible with older LTE categories and UMTS & GSM in Samsung Galaxy Note 7. Moreover, voice telephone (VoLTE) is also supported.

Available From September

Samsung Galaxy Note 7 will be available soon in Europe and Asia markets. We suppose the retail price is significantly more than that of Samsung Galaxy S7 edge. But the price will be available when it’s presented to public. You will see the price on www.4gltemall.com in near future.

Huawei E5351 3G 42Mbps Mobile WiFi Hotspot Review

We had introduced the Huawei E5151 pocket WiFi years ago, which is a 3G mobile WiFi router supporting download speed to 21Mbps and the most important feature of this pocket WiFi is that the E5151 has a port for LAN/WAN, which could connect with an Ethernet cable to get or share internet connection. At that time, some customers were wondering if there is newer model which could support higher speed connection, i.e. download speed is faster than 21Mbps.

Huawei E5351 E5351s-2

Actually, we had introduced the latest Huawei E5770 mobile WiFi Pro, which has LAN/WAN ports and supports download speed to 150Mbps on LTE Category 4 technology. And the Huawei E5770 has large battery of 5200mAh, which not only keeps itself long time working, but also works like a mobile power bank to charge other electronics such as smartphone or tablets. However, many customers said the price of Huawei E5770 is a little bit high; it’s not a budget pocket router. Really, it’s a high-end partner for wireless connection.

Huawei E5351 E5351s-2

Today, we will introduce another new mobile pocket router. The model number is Huawei E5351. It’s still a 3G mobile router and upgraded from huawei E5151 MiFi. From the appearance, we can see the Huawei E5351 is very similar to Huawei E5151, they both have a port for an Ethernet cable and USB interface. The LED indicators on the front and back logs are almost the same.

Huawei E5351 E5351s-2

The battery capacity of E5351 MiFi is still the same to E5151, only 1500mAh. For most users, it’s not enough for common use. The lucky thing is the battery can be removable, so if there is a spare battery or mobile power bank, it would be OK to use for long time. From this point, we would recommend the Huawei E5770 with large battery; users don’t worry about the power off when working with E5770.

Huawei E5351 E5351s-2

The key features of Huawei E5351 are listed below (same to E5151):

Provide wireless internet connection through WiFi from the Ethernet cable
Provide wireless internet connection through WiFi from the inserted SIM card
Provide internet connection through Ethernet cable from inserted SIM card

The SIM card slot of Huawei E5351 is for a standard 6-pin SIM card, which is the same to E5151. But there is no slot for Micro SD card. The most important features should be the improvement of the wireless data transmission speed. Huawei E5351 could support almost double speed of that of E5151. With 3G DC-HSPA+ technology, Huawei E5351 could achieve peak download speed to 42Mbps while E5151 only support speed to 21Mbps. Like E5151, up to 10 wireless devices could access internet through Huawei E5351.

Huawei E5351 E5351s-2

In all, Huawei E5351 is a powerful mobile pocket router for traveling or business trip. It provides more option for wireless internet connection. But if you don’t need the LAN port, you may try other budget Huawei mobile WiFi hotspots options such as Huawei E587 or E5730s, which has good performance for internet connection.