Category: Product Comparison

Huawei B715 LTE Cat.9 WiFi Router Review

As a direct successor to the popular LTE Router Huawei E5186, Huawei presents a new LTE router B715 in Poland for the network provider “Play”. As a new LTE advanced router, the Huawei B715 reaches LTE category 9 with up to 450 Mbit/s in the downlink, which is a great improvement than the predecessor Huawei E5186 router. The B715 router has four RJ45 Gigabit LAN interfaces and a USB port, as well as an integrated telephone function with RJ11 connection. And we also see it’s available in Latvia for network carrier LMT with branded version.

Huawei B715 B715c-23c

Huawei B715s-23c

The Huawei B715 is currently only available in Europe. The exact model name for the new Huawei LTE Cat9 router is B715s-23c. This designation recognizes the modem optimized for the European market; in other parts of the world, the B715 CPE may have a slightly different designation and thus different equipment with support of different frequency bands. Since the frequency ranges used in Europe are mostly same, as well as in Austria and Switzerland, the B715s-23c can also be used without problems in other Europe countries.

Huawei B715 B715c-23c

Huawei B715: 4.5G LTE Advanced Technology

The Huawei B715 has integrated LTE antennas, but also has two SMA connectors on the back for an external LTE antenna, which can be connected when needed. The LTE modem can connect up to three frequency ranges by means of carrier aggregation (channel bundling), which theoretically allows up to 450 Mbit/s in the downlink. In the uplink, up to 50 Mbps are possible via LTE. In addition to LTE, UMTS (3G) and GSM (2G) are also supported.

Huawei B715 B715c-23c

The RJ11 connector on the back panel of the Huawei B715 can be used to connect an analogue telephone, as well as a USB port for integrating a printer or storage media into the network. Wired devices can be connected via the four LAN ports. If required, one of the four LAN ports also acts as a WAN port, so the B715 can also be used with an external modem (eg fiber optic or cable modem). Wireless devices can connect to the Huawei B715s-23c via Wi-Fi, the router supports the frequency ranges around 2.4 GHz and 5 GHz.

Huawei B715 B715c-23c

Huawei B715 and B618 in comparison

Attentive readers may already have noticed, with up to 450 Mbps, the new B715 LTE router is not the fastest router model in the Huawei product range. The Huawei B618 even offers up to 600 Mbps via LTE Cat11. The Huawei B618 also has the 4 × 4 MIMO antenna technology installed, the B715 can seem only on 2 × 2 MIMO antenna technology fall back. Nevertheless, the Huawei B715 also has advantages over the B618: there are four RJ45 Gigabit LAN ports and not like the B618 with only 2 TS-9 connectors, the B715 has the SMA ports for external antenna, which is common on Huawei LTE stationary routers.

If you need the external antenna for Huawei B715 Router, we would like to recommend below the two antennas. We had tested the antennas and they can work well with Huawei B715 LTE Router:

http://www.4gltemall.com/4g-antenna-two-sma-connector.html

4G LTE Indoor Antenna (2 x SMA Connectors) for Huawei/ZTE 4G LTE Routers/Gateway/LTE CPE

 

If you prefer 4G outdoor antenna to get better signal, you could try below the antenna:

http://www.4gltemall.com/4g-lte-outdoor-antenna-2-x-sma-connectors.html

4G LTE Outdoor Antenna (2 x SMA Connectors) for Huawei/ZTE 4G LTE Routers/Gateway/LTE CPE

 

We would take full detail test for the new Huawei B715s-23c router, and compare it with the more advanced Huawei B618. Keep follow on us(twitter: 4GLTEMALL) and we will update our test report once it’s done.

Huawei B715 B715c-23c

Difference between Huawei E5786 and E5885

It has been months since the Huawei Mobile WiFi Pro 2 was released to market and we had introduced this new 4G router in details. If you had used the Huawei first LTE cat6 mobile router, you may know the Huawei E5786 4G hotspot. Today, we will have a look at what’s the difference between the Huawei E5885 and E5786.

Appearance

As we introduced before, the Huawei E5885(available model called E5885Ls-93a) follows the design of the Huawei E5770 Mobile WiFi Pro. On the front upper side, there is only a small screen to show connection information. The upper side is made of plastic but looks cool, the below part is made of high quality leather, which makes it feels very good in hand. Huawei logo is on the leather.  The whole body of Huawei E5786 is made of plastic, but it also feels good and slippery. The Huawei logo and power button are located at each side of the screen of E5786.

On the back of Huawei E5786, there is Huawei logo with “mobile WiFi”. The Huawei E5885 back has Huawei logo and words “CAT6/6400mAh/23Wh” which indicates the mobile router is a LTE Category 6 mobile hotspot with 6400mAh battery for 23 hours working time.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 back logo

The Huawei E5885 power and WPS button are located at the top edge. Between them, the Output and input USB ports, and the Ethernet port are covered by a small cap. The Huawei E5786 has a menu button on the top edge and USB port is at the opposite side.

Huawei E5786 back logo

The back cover of Huawei E5885 and E5786 can be opened. In the Huawei E5885, we can see the SIM card slot and Micro SD card slot are located, where there is a reset button in red. Below is a label with the model number, IMEI number, SSID, WiFi key, IP address, user name and password. One QR code is also included so as to scan and connect. The Huawei E5786 also has the SIM card and MicroSD card slot lying together. What’s more, two TS-9 connectors for external antennas are covered by a cap. However, there is no antenna connector in Huawei E5885.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 sim card slot and sd card slot

Technical Specifications

The Huawei E5885 and E5786 are both LTE cat6 mobile hotspot which could support LTE download speed up to 300Mbps and upload speed to 50Mbps. They both provide variants for different carriers and various LTE frequency bands. The WLAN standard supports latest 802.11ac with dual band. Huawei E5786 could support up to 10 wireless devices to access internet through WiFi while the latest Huawei E5885 supports maximum up to 32 users. They both use the Micro SIM card. The Huawei E5885 provides one more connection by Ethernet cable while Huawei E5786 can only keep connected with SIM card.

Huawei E5786 antenna connectors

Battery

The back cover of the Huawei E5786 and E5885 can be opened, but the battery of them can’t be removed for change. The battery of Huawei E5786 is 3000mAh, which can keep working for 10 hours. While the Huawei E5885 has larger battery of 6400mAh, which would provide 23 hours working time. They both can charge other electric devices as a mobile power bank. However, the Huawei E5786 needs an accessory call AF18 adapter to make this function true. The Huawei E5885 can directly charge other devices without any problem.

 

What’s more, the Huawei E5885 has a special USB cable with the device. The USB cable can be used as a lifting rope, which is really a smart and practical design. The Huawei E5786 uses the normal USB 2.0 cable for charging.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 USB Cable

From the comparison, we think there is no doubt that the latest Huawei E5885 is much better than the E5786, ont only on the design but also the practical functions. So if you are looking for a wonderful mobile hotspot, we think Huawei E5885 is good to recommend.

Huawei P10 Plus In Hand

Together with the Huawei P10, Huawei launched the P10 Plus in spring 2017. The sister model offers a slightly larger display with better resolution and has a light-sensitive camera. The P10 Plus also has its own way in the case. The technology inside can be seen: as standard, there are 128 GB internal user memory, 6 GB memory and an Octa core processor of the Kirin 960 type. The 3750 mAh strong battery ensures a long runtime.

 

Larger Touchscreen

In a direct comparison, it’s obvious that the Huawei P10 Plus is a whole lot bigger than the normal P10. Instead of a 5.1 inch display, a 5.5 inch display is used; the resolution was increased from 1920 x 1080 pixels to 2560 x 1440 pixels. The display makes colors very strong thanks to AMOLED technology, but a slightly higher maximum brightness could be well tolerated. In most situations, the screen is bright enough, but in direct sunlight, many other smartphones such as the Samsung Galaxy S8 would benefit clearly.

The fingerprint sensor is located under the display, same as on the P10, and can also be used as a replacement for the three software keys: Home, Back and Multitasking. Right soft-touch keys next to the fingerprint sensor are not available.

 

Beautiful case design

The case is made of metal for both the Huawei P10 and the P10 Plus. However, the rear panel has a crucial difference: the rear panel is slightly corrugated, the P10 is smooth. I personally like the back of the P10 Plus much better, it stands out from the crowd and the device does not seem so slippery in the hand. The case looks particularly nice in the colors blue (“Dazzling Blue”) and green (“Greenery”), depending on the light incident, the colors change with the viewing angle slightly, which is a nice effect.

 

Camera with f1.8 aperture

Regarding the camera, Huawei has improved the P10 Plus compared to the normal P10. There is a monochrome sensor with 20 megapixel resolution and a RGB sensor with 12 megapixels, the aperture of f1.8 is here the decisive difference to the P10. The photos were very good in the test, colors were accurately reproduced and the picture was always sharp and exactly as one expected. If you want to get a bit more out of the camera or want to test things like long-exposure with tripod, you can do this via the professional mode.

 

Other technology

As an operating system, Android version 7.0 is used in the Huawei P10 Plus. The EMUI 5.1 user interface runs on it. I personally find the software very appealing, as it offers some interesting additional features compared to the basic Android and partly quite close to the iOS operating system from Apple, which is quite positive. Other users criticize more often that the EMUI surface is too colorful and playful – a criticism, which is certainly justified in some places.

 

With 128 GB internal memory and optional memory expansion via MicroSD card, the P10 Plus offers more than enough memory space. The dual SIM function is available in Asia areas.

 

The HiSilicon Kirin 960 processor proved to be fast and powerful, as expected from an expensive high-end smartphone, of course. Also the modem could convince: Reception and voice quality were perfect. In the LTE network, the Huawei P10 Plus can use speeds of up to 500 MBit/s in many areas. This is possible in the many networks by means of three channel bundling (3CA) and 256QAM modulation.

 

Conclusion

The Huawei P10 Plus has convinced in the test especially through its very beautiful metal body and the very good camera system. Especially the case colors “Greenery” and “Dazzling Blue” are unique. Away from the camera and body, the Huawei P10 Plus is quite unspectacular: it offers up to Wireless Charging almost everything you expect from a flagship smartphone 2017 and works fast and flawlessly. The AMOLED display of the P10 Plus offers advantages in comparison to the LCD of the Huawei P10 black value, but annoying is the vulnerability to fingerprints. All in all, therefore, my conclusion is: if you think the normal P10 is too small or its body is too simple, you may need get a good upgrade with the P10 Plus!

 

ZTE UFi MF980 VS UFi MF970

With the upgrade of LTE network to LTE Advanced or Advanced PRO, the vendors are also trying to upgrade their wireless gadgets so as to meet the market demand. As we introduced the ZTE MF970 UFi last year, ZTE presented a new 4G LTE Router ZTE UFi MF980 as a successor. In this article, we will see what has been improved on the new ZTE MF980 UFi comparing to ZTE MF970.

Appearance

As we showed the images, ZTE MF970 UFi is in white color and the screen is on the middle of front with “ZTE” and “UFi” listed at each side of the 1.44 inch screen. Following this design, ZTE MF980 UFi also has a 1.44 inch screen and the same two words ZTE and UFi, but MF980 is in black color. But ZTE MF980 is thinner than MF970 and has long body.

ZTE MF980 has power and func button on the top edge, which is same to ZTE MF970, but the SIM card slot is also with the two buttons in MF970, while the SIM card slot is at the opposite edge in ZTE MF980. The two connectors for external antenna for ZTE MF980 are located together while the MF970 has two connectors located at each side of the USB 2.0 port, where ZTE UFi MF980 has USB3.0 port. On the back, UFi MF980 has ZTE logo on while the MF970 shows some information about certificate for CE, WiFi and RoHS.

Technical Specifications

As we introduced before, the ZTE UFi MF970 is a LTE Category 6 mobile router which could support peak download speed to 300mbps and upload speed to 50mbps. In real product, it may be the Vodafone R226 or R226Z model. As the upgraded model for LTE advanced network, ZTE MF980 UFi supports LTE category 9 technologies and peak download speed to 450Mbps and upload speed to 50Mbps. They both support the common LTE FDD & TDD networks with 3G UMTS and 2G GSM networks backward. On this point, there is no doubt that ZTE MF980 UFi is more powerful than ZTE MF970 if working on LTE-A networks.

ZTE UFi MF970 could support up 14 wireless terminals to access internet when working with a valid SIM card, while the new MF980 UFi can support almost double of the qty to 32 WiFi-enabled devices. They both provide the WLAN standard to latest 802.11 ac with dual-band.

 

Battery

Like Huawei E5786 4G Mobile Hotspot, the ZTE MF970 and MF980 are both with the built-in battery, which can’t be removed for change. One question that we don’t understand is that the newer model ZTE UFi MF980 has battery capacity to 2200mAh when the predecessor MF970 has larger battery to 2300mAh. Many of the current 4G mobile router with same level are with 3000mAh battery or even more. What frustrating is the battery can’t be removed for backup battery. So if you would keep them working for long time, you’d better to take a bank power with large capacity. On this point, the latest Huawei E5885Ls-93a seems more powerful with LTE-A support and built-in large battery.

Summary

There is no doubt that the ZTE MF980 UFi is powerful on technical features, especially working on LTE advanced Pro networks for multiple users with group activities. But the decent battery would limit its long term performance. ZTE MF970 UFi is also good if you don’t quite need the LTE advanced pro network and just need a budget mobile pocket router. After reviewing the two ZTE LTE UFi, which one will you buy?

 

 

Difference between ZTE UFi MF980 and Netgear Aircard 810s

Since more and more network providers deployed LTE advanced networks, many vendors over the world are providing new LTE gadgets to support the latest new LTE networks. The US vendor Netgear Wireless and Chinese vendor ZTE are two of them. Netgear presents the Aircard 810s with support of LTE Category 11 and ZTE provides the UFi MF980 with support of LTE Category 9. In this article, we will check what the difference is between the two mobile 4G Routers.

Appearance

The Netgear Aircard 810s has a 2.44 inch LCD touchscreen, user can do simple settings like operating a smartphone. However, the ZTE MF980 UFi’s 1.44 inch TFT screen is not a touchscreen, so it can be operated by the power and func button, web interface or by ZTELink APP. Of course, the Aircard 810s could also be operated from web interface and Netgear aircard APP. The ZTE UFi MF980 is very thinner than Netgear Aircard 810s, so the feel in hand is better.

They both have two connectors for external LTE antennas and the connector type is TS-9. The connectors in Aircard 810s are located at the two sides of the USB ports with small caps, while the connectors of ZTE MF980 are together. And they both use Micro SIM.

Battery

The battery of Aircard 810s is removable and the SIM card slot is in the battery slot. The battery capacity is 2930mAh, which could support 11 hours for continuous use. The battery of ZTE MF980 UFi is built-in and can’t be removed. And its battery is 2200mAh, which is enough for daily use, but can’t be changed to backup battery. But they both don’t have slot for Micro SD card.

Technical Specifications

With Qualcomm Snapdragon X12 chipset and the support of LTE Category 11, Netgear Aircard 810s could support peak download speed to 600mbps. ZTE UFi MF980 could achieve download speed to 450mbps and upload speed to 50Mbps with the support of LTE Category 9.

 

Netgear Aircard 810s could connect up to 15 wireless users simultaneously while ZTE UFi MF980 could support up to 32 wireless users to access internet, on this point, ZTE UFi MF980 seems more powerful than Aircard 810s. Regarding the WLAN feature, they could support latest Wi-Fi 802.11ac with 2 X 2 MIMO on dual band(2.4GHz and 5GHz).

Other feature

The Netgear Aircard 810s has an extra function called Jump Boost, which makes it could work like a mobile power bank to charge other electric devices such as smartphone, Pads etc..ZTE MF980 UFi doesn’t have this function per the official description.

Conclusion

Comparing the features and specifications of the Netgear Aircard 810s and ZTE UFi MF980, it’s not doubt that Aircard 810s is better than ZTE MF980. With higher configuration, Netgear Aircard 810s can provide better performance for internet connection, but price would be higher. ZTE MF980 UFi is also good for most users with budget price. But the built-in battery may not be a good feature if you want it to work for long time.

 

Actually, there are many more 4G Routers for LTE advanced networks, if you want to check more devices, welcome to check on www.4gltemall.com .

 

 

ZTE MF910 4G Mobile Router Test

Many people are demanding higher speed for internet connection, even when they are on the go for vacation. If the LTE network is available, user just need a reliable mobile WiFi router to fulfill this. The ZTE MiFi router MF910 would do this job well for a good network partner.

ZTE MF910

The model ZTE MF910 is the big brother of our previously tested model ZTE MF65+. It offers the same features, but it is faster and more durable. Hard data: the MF910 gadget can be used continuously for 8 hours downloading data at speeds up to 150Mbit/s, in standby mode, it can withstand almost a week, and the maximum use of its services may as many as 14 other devices.

ZTE MF910

The manufacturer does not provide any information on the overstatement. ZTE MF910 battery in fact it is difficult to unload. Internet speed is of course dependent on the extent and network environment. The router I tested using a SIM from Plus network. Even outside the city to check it perfectly, even when the coverage rate on small but readable screen does not show the five bars. Without any problems I could browse mail, Facebook, portals and watch the video on YouTube.

ZTE MF910

I was surprised how well I downloaded from the Internet file weighs about 500 MB. In fact, I did not feel the difference in speed compared with that to which I am accustomed when I use the network in your own home.

 

There is no any problem regarding the hardware configuration. Comparing with the ZTE MF65+ MiFi, it should be the biggest advantages of this router. Just turn the whole holding down one button. That’s enough to be able to enjoy access to the Internet. All the smartphones and tablets that “paired” with the MF910 did not have any problems with that hardware. I can only complain to the location of the SIM card slot. It is devilishly difficult to correctly add to the router.

 

ZTE MF910

The whole body weighs 106g and the size is similar to a candy package (65x 14.6 x 104 mm). It’s a little larger than the ZTE MF65+ caliber, but still there is nothing to prevent the router to throw in a bag or backpack, or put it in his jacket pocket.

ZTE MF910

ZTE MF910 MiFi is equipment that meets all the expectations from customer. It will provide high-speed internet in both the cottage and will save you and your closest collaborators, when the company’s network will refuse to obey. If you are looking for a good partner for outdoor activities, ZTE MF910 is highly recommended. The most important, the price is aggressive for most users.

 

ZTE MF910

Difference Between Huawei B618 and E5180 LTE Cube

You may use the Huawei E5180 LTE Cube at home for wireless internet connection. It’s a good wireless router in cool shape like a cube. With the development of LTE networks, the end-users and the network providers have a higher demand for the user equipment. Here comes the new LTE router Huawei B618, which seems to be upgraded from the Huawei E5180 cube and in this article, we will see what’s the difference between the Huawei B618 and E5180, and what functions have been improved from the old one to the new one.

Appearance

Following the Cube shape design of Huawei E5180, Huawei B618 is also in white color but has a larger body and higher if stands on a desk. Perhaps because the B618 has more interfaces for multi-functions, the B618 weights much more than E5180. On the front of Huawei E5180, there is only one signal indicator and one WiFi indicator, but on the B618, there are three signal indicators, and the power, status, LAN, WiFi, mode indicators & WPS button are listed.

On the back, Huawei E5180s-22 has one LAN port, one telephone port and one power plug port. The E5180s-610 only has one LAN ports, no telephone port. Two connectors for the external antenna are listed at another side of the body. Huawei B618 has two LAN ports(one is also for WAN), one USB 2.0 port, one telephone port and power plug port. What’s more, the B618 router also has the power button and two connectors for external antenna, which are covered by a small cap.

On the top side, Huawei E5180 has the Huawei logo but it’s empty on the Huawei B618 top side. They both have one label on the bottom, which indicates the model number, SSID, WiFi key/password, power rating, IMEI and S/N number, and other certification logos. The Huawei B618 has extra WPS Pin on the label. And they both have the SIM card slot at the bottom and uses a Micro SIM card.

 

Technical Specifications

As an LTE Category 4 router, Huawei E5180 can support peak download speed up to 150Mbps and upload speed to 50mbps. The new Huawei B618 LTE Cat11 router could achieve almost 4 times the speed from E5180, i.e download speed to 600mbps. Huawei E5180 can support maximum 32 users to access the internet while Huawei B618 can support 64 WiFi users, which is double of that from E5180.

The WLAN standard of Huawei E5180 is IEEE 802.11 b/g/n on single band 2.4GHz. The Huawei B618s-22d can support the latest 802.11 ac besides a/b/g/n on dual-band (2.4GHz and 5GHz).

 

Management

The two routers could both be managed from the web interface in the browser, but Huawei also provides the APP to manage the routers from Smartphones or Pads.

It’s no doubt that the Huawei B618 with higher specs is much better than E5180, but frankly speaking, the Huawei E5180 cube is enough for most users at home or office. If you don’t have too many requirements for the router, Huawei E5180 is budget one to recommend. Huawei B618 is also good to recommend because it’s future-proof and would provide fantastic surfing experience under LTE-advanced networks.

LG G6 and Samsung Galaxy S8 Comparison

In the past two weeks, we was able to test and compare the new smartphone LG G6 and Samsung Galaxy S8. The two flagship smartphones from South Korea offer the latest technology in a futuristic-looking, but they are clearly different from each other, as they follow quite different concepts. On the one hand, the Samsung Galaxy S8, which with the rounded AMOLED display is an absolute eye-catcher, on the other hand the LG G6, which scores with a dual camera. Which one of the two smartphones is better, you can read in this brief comparison.

Both are top smartphones technically

We do not want to go into the technical data of the two devices in details; you can find the description with all details on the website of LG or on the website of Samsung. In short, both devices are very fast and react as fast as you would expect from an expensive high-end smartphone. The Samsung Galaxy S8 has indeed the more modern processor/chipset integrated, however in the use actually no difference. Also with the software, both devices are in my opinion the same, we can’t find anything different about function from the two phones.

 

Samsung Galaxy S8 Highlights and Fault

In the following, we would like to take a closer look at the key features. On the Samsung Galaxy S8, this was the following:

  • Very nice, futuristic design (purely optical)
  • Excellent camera, top picture quality with photo and video, super fast focus!
  • Latest modem generation (LTE Cat16, Gigabit capable) and incredibly good frequency band support
  • Very good Net monitor with manual band-selection-function (can be called up by key code)

The Samsung Galaxy S8 has also some negative characteristics in our opinion, as the two-week usage phase has shown:

  • Camera: Resolution in the 16: 9 format with only 9.1 megapixels quite small
  • Device does not lie so well in the hand, the effect is slippery
  • Fingerprints can be seen very quickly
  • The battery could be better
  • The shining metal frame is annoying, it would be nicer
  • The curved AMOLED display of the S8 does not compare directly as the flat LCD of the LG G6

 

Especially the design has finally disappointed me somewhat: visually, the Galaxy S8 is the most beautiful smartphone currently in our opinion, but in the hand, the device does not look so handy. Probably it is because the glass on the front and back is so strongly rounded and only a very thin metal strip remains. The LG G6 looks not so good for a long time, but acts simply more solidly. By the way, the Galaxy S8 is comparatively narrow (under 7 cm) due to the 18: 9 display, but a one-hand operation is almost impossible without the need for extensive handling due to the extremely long display.

LG G6: Highlights and Fault

 

The LG G6 can convince with some advantages, which the Samsung Galaxy S8 does not offer. We especially liked the following features:

  • Very good display, excellent picture quality
  • Is “solid” in the hand
  • Wide angle camera is a real added value

 

 

However, the LG G6 is not perfect; we have also some negative points on this device like the Samsung Galaxy S8:

  • Glass back susceptible to fingerprints
  • Camera picture quality might be slightly better
  • Device is a bit clumsy
  • No Net monitor available

The last point with the Net monitor is, of course, very individual and should be completely irrelevant to the vast majority of users, but I wanted to mention it, because the Samsung Galaxy S8 provides an excellent Net monitor. The LG G6 is also missing also wireless charging and the special audio amplifier in the EU version, but in the international version both is available. We do not mind at all, but some users may complain about this LG decision.

 

Conclusion: Which phone is better?

Before the comparison test, it was actually quite certain that most users would love the Samsung Galaxy S8 rather than LG G6. Why? The design of the S8 as we said extraordinarily well, optically it is simply a highlight. From a technical point of view, the S8 also offers almost everything you could possibly want. But after two weeks of use I have to say: the S8 has me somewhat disappointed. The battery was much weaker than expected (in particular, the Always-On display draws energy) and the S8 simply is not so good in the hand. Also in the display I was somewhat disappointed in the direct comparison to the LG G6, the curves falsify the colors sometimes quite strongly.

The LG G6 I like a little better overall, as the battery lasts longer. The G6 is well in the hand and the display is faultless. Also the wide-angle lens of the dual camera I have often used, it is not only a gimmick, but a practical function. The image quality of the wide angle camera is not very good, but the function is still fun. The LG G6 has a further advantage over the S8: it is much cheaper than the S8.

From this comparison, there may be no problem to decide between the two smartphones. If you want to check more new 4G LTE Smartphones, welcome click here: https://www.4gltemall.com/4g-lte-smartphone.html

Huawei E5885Ls-93a Mobile WiFi 2 Pro Test

In the internet era, we need surf internet anytime and anywhere, but when going outside, the unstable WiFi and expensive charge on 4G may be a big problem for those who want high quality data transmission. And then the Mobile WiFi Hotspots are becoming a good solution for this. Today, we would introduce a new Mobile Hotspot from Huawei, and let’s see what’s new it bring to us.

Cool Appearance

The new model is named Huawei E5885 Mobile WiFi 2 Pro, more specifically; the model number is Huawei E5885Ls-93a. We suppose there will be other model numbers for various network providers over the world. If the new brother model available, we would also introduce.

 

Following the design from first generation of Huawei Mobile WiFi Pro E5770, the Huawei E5885Ls-93a is in cuboids shape, but it’s thicker and more elegant than E5770. The size of E5885 is just as large as one hand and user can easily take it in hand or pocket. It also looks like a common mobile power bank, actually, it can work as a mobile power bank to charge other devices by USB cable.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 front logo

The top half of the front is made of black plastic material, where there is a 0.96 inch OLED screen in the middle. The screen function is similar to its predecessor huawei E5786, but not a touch screen like Huawei E5787 mobile WiFi Touch. When the Huawei Mobile WiFi Pro 2 working, the screen would show the network connection status, battery status, signals, SMS and WiFi connections etc.. The rest half of the front is made of leather, which makes the Huawei E5885 very soft so as to have a very good touch feel. And we can see, the Huawei logo is just printed on the leather at the below side of the LED screen. The back cover is also made of leather with Huawei logo and the words “CAT6/6300mAh/23Wh”, which means the E5885Ls-93a could support LTE Cat.6 and has large battery of 6400mAh to have 23 hours continuous working time.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 back logo

The back cover of the Huawei E5885 could be opened and we can see the SIM card & Micro SD card slot with one Reset hole. Huawei E5885Ls-93a uses Micro SIM card. The Huawei WiFi 2 Pro could support maximum SD card storage up to 32GB, and the data could be shared through the WiFi in the connected users. At the side of the SIM card slot, there is a small label which indicates the name of this device: Huawei Mobile WiFi Pro2 E5885L and model number E5885Ls-93a. And the SSID, WiFi key, IP address, IP log in user name and password. There is also one QR code, where user can scan to connect, and the IMEI number, S/N number, certified logos are listed below.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 ports

The round side of the Huawei E5885 is made in champagne gold color, which makes the WiFi Pro 2 looks very cool. On the top edge, the WPS and power button are located at each side. Open the cap between them, we can see the 5V/2A output USB port, Input 5V/2A port and one RJ 45 Ethernet port. With the Huawei E5885, there is a sling which can not only hang the device but also work as a USB cable. It’s very useful for user to hold the E5885 WiFi pro 2, and charge other device. We see the design is also available on the Huawei E5770 mobile WiFi Pro and it’s really a good design.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 power and WPS button

Internet Connection Through WiFi

The Huawei Mobile WiFi 2 Pro is easy to use, user just need one valid SIM card with data plan, plug into the SIM card slot and power on, then there will be WiFi available for internet connection. The SIM card needs to be Micro SIM. User can see the network mode, data used and left, battery status in Huawei HiLink APP through smartphones. And user can also setup the WiFi mode, single band or dual band (2.4GHz and 5GHz) are both available. Of course, we can also see the data used and network mode & provider’s name on the OLED screen.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 sim card slot and sd card slot

Internet Connection via Ethernet

If only Ethernet cable is available for internet, Huawei E5885 Mobile WiFi Pro 2 can also show its function. Just plug the Ethernet cable to the RJ45 port and configure the settings through Hilink APP or web interface, you can then access internet. We suggest downloading the Hilink APP, connecting with the Huawei E5885 WiFi and open the APP for settings. To be more secure, you can also change the log in user name and password. The whole process is very simple and user can also do further settings if necessary.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 sim card slot

Work as WiFi Repeater

The Huawei E5885L can also work as a WiFi repeater, which means the WiFi PRO 2 can get connected with the existing WiFi from other gateway or router, just like a phone connecting to WiFi. After connected, the Huawei E5885 can extend the WiFi coverage for more space. However, if the Huawei E5885 is already connected with Ethernet cable, the WiFi repeater function would be unusable.

 

Battery Saving and Guest WiFi

The Huawei E5885 is very smart in application. There is battery-saving function, when it’s activated, the WiFi Pro 2 would automatically close the WiFi if long-time data transmission so as to save battery. Sometimes, user may need setup a special WiFi for visiting guest, the Huawei E5885 can provide this function and if don’t need it, user can close this function easily from Hilink APP.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 in box

Storage Sharing without Data Consumption

The users connected with Huawei E5885 WiFi can share the files or videos in Micro SD card easily, what’s amazing is that the sharing would not cost any data, so it’s called ”Zero data consumption sharing”. It’s better to share the files, images or videos through the Huawei Hilink APP. The Huawei WiFi 2 PRO also supports sending short messages.

 

Fastest Wireless Surfing Speed

In our test, the Huawei WiFi 2 Pro would provide stable and fast internet connection. With the support 300mbps download speed on LTE category 6, Huawei E5885 can switch to the fastest network mode available so as to provide the best support for data transmission. It can definitely meet the common requirements whenever you are at home or going outside.

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 USB Cable

Summary

As a latest LTE gadget combining the functions of 4G mobile hotspot, Ethernet gateway and mobile power bank, Huawei E5885 mobile WiFi Pro 2 is a powerful and practical partner for outdoor activities or business travel. With the cool design and good touch feel, we can’t praise more on the small pocket router. The easy setup and management is also very good for most users.

1 & 1 New mobile LTE router E5573 from Huawei

1 & 1 has now a new mobile WLAN router with LTE support from Huawei in its product range, which the customers can use with a notebook or tablet. The router is the Huawei E5573 in black color. The small LTE router Huawei E5573 looks cool and is very similar to its predecessor such as Huawei E5577 and E5373.

 

While the Huawei E5573 router is included in the package with a 1 & 1 Tablet-Flat as a free start gift, the prospective buyer for the mobile device may also benefit from the contract. A minimum contract term of two years applies.

With the mobile router Huawei E5573, up to 14 devices such as smartphones, tablets or notebooks can connect to the router through WiFi and then access internet. Thus the user does not have to use his own mobile phone access for surfing the Internet. The owner has the possibility to set up a WLAN password protection so that only authorized persons can access the mobile WLAN router with LTE.

 

The Huawei E5573 can either be connected in the mobile network via LTE or via UMTS. It should automatically select the fastest mobile connection. According to 1&1, the the 1 & 1 version of the E5573 also has a WLAN extender function, depending on availability, the router also connects to the Internet via a 1 & 1 Home Server at home or via a public WLAN hotspot. The original Huawei version of the E5573 also offers this function.

 

With the dimensions 104 x 65 x 14.6 millimeters and a weight of 106 grams, the mobile WLAN router with LTE support fits in any trouser pocket and is lightweight. The Huawei E5573 supports LTE speeds of up to 150 Mbps downstream and up to 50 Mbps upstream. According to the manufacturer, the 2300 mAh battery should have a standby time of up to six days and a continuous operating time of up to eight hours.

 

The WLAN interface allows a maximum speed of 300 MBit/s and operates in the frequency range of 2.4 GHz or 5 GHz. WLAN ac is unfortunately not supported, which is due to the not too high LTE speed of “only” 150 MBit/s.

 

It’s a pity that the Huawei E5573 has only one signal and battery indicator on the front, they are just located at the two sides of the power button. Unlike the latest model Huawei E5787 or Huawei E5786, user can’t read the connection information from the front. Users have to get the information from the huawei mobile wifi APP or log into the web interface for more details. Of course, the Huawei E5573 offer lower price than the Huawei hotspots with screen. But we still think the screen is necessary.