4G LTE Mall – Page 47 of 104 – Share 4G & 5G LTE Technology and Latest Gadgets, Enjoy Amazing Speed with LTE Broadband!

Huawei Presents B618 LTE Cat11 Router

The fourth mobile LTE radio generation is becoming more and more powerful, with LTE Advanced Pro and 4.5G, respectively, currently experiencing a new leap in speed. Some 4G smartphones and mobile hotspots already support LTE category 11 or higher, while LTE Cat6 with 300 MBit/s in LTE router models was the highest of the feelings. A few weeks ago, Huawei presents a new 4G LTE Router with Ethernet port and SIM card slot, the model number is Huawei B618, which supports LTE of category 11 with up to 600 MBit/s in the downlink and 50 MBit/s in the uplink.

Huawei B618 Appearance

The Huawei B618 router visually resembles the design of the Huawei E5180 cube and can therefore be designated as its successor. The device is square and quite “high” built, on the front there are various LEDs as well as a WPS button. On the back there is a power button, two RJ-45 Gigabit LAN ports (one of which can also function as a WAN port), as well as a USB 2.0 port. There is also an RJ-11 connection for an analog telephone or fax machine as well as the connection for the external power supply. Under one cover are two connectors for an external antenna. There is no battery for mobile use.

Huawei B618 B618S B618s-22d (2)

Huawei B618 WiFi Router Technical Specifications

The modem in the Huawei B618 works with LTE Cat11 and achieves data rates of up to 600 MBit/s in the downlink as well as 50 MBit/s in the uplink. Which LTE Advanced Pro / 4.5G features are supported exactly is still unknown, but in any case, Triple Carrier Aggregation is on board. This allows the Huawei B618 to bundle three different frequency ranges with a maximum of 20 MHz each. To get to 600 MBit/s is enough but not the same, as the 256QAM modulation controls the modem in the downlink. Alternatively, the support for 4 × 4 MIMO would be conceivable whether the B618 can do this, but is currently not clearly identified.

The WLAN module allows connection to up to 64 devices at the same time in the 2.4 GHz and the 5 GHz band. The maximum data rate is 867 Mbps (802.11 ac), the WLAN antennas are fixed in the Huawei B618 and cannot be exchanged.

Until now, the Huawei B618 only appears in Poland at Play (February 2017), where it is marketed in conjunction with the “4G LTE ULTRA” offer. As mobile radio networks continue to grow, however, it is likely that the Huawei B618 LTE router will also find their way to other countries and to other providers, which is often the case with Huawei LTE router models, however, user should pay close attention to the supported features and frequency bands, as Huawei can often optimize the routers for the respective provider and remove individual functions such as the telephone function. The B618 router available model number Huawei B618s-22d in Poland at Play seems to be unbranded and it may be suitable for the other market in Europe as it supports all important LTE band 1, 3, 7, 8, 20.

Telekom Speed Stick V LTE Stick

The Germany operator Telekom offers the 5th version of the stick-series now named Speed Stick V. The new model is distinguished by a number of improvements. It is a worthy successor of the Speed Stick III. We show what the device can do and what advantages it offers compared to earlier versions.

LTE features and characteristics of Speed Stick V LTE Stick
Manufacturer and Model	Hauwei E3372s-153
Download rate	Up to 150 MBit/s
Upload rate	Up to 50 MBit/s
Compatible LTE Bands	LTE800, LTE900, LTE1800, LTE2100, LTE 2600MHz
Backward compatible with:	DC-HSPA+, UMTS, GSM frequencies (850, 900, 1800 and 1900 MHz)
MIMO Support:	MIMO 2×2
Connector for external antenna	Yes; 2 aerial socket type CRC-9 available(Buy Huawei E3372 Antenna)
LTE Category:	LTE modem of Category 4 (CAT4)
Chipset	HiSilicon
Others
Dimensions (LxWxH)	88 x 28 x 11.5 mm with 24 grams
USB standard	USB 2.0
Memory card expansion	Yes; MicroSD up to 32 GB
Compatible Operating Systems	Windows XP, Windows Vista, Windows 7, Windows 8.x, Mac OS (from 10.7)

Solider successor of the Speed Stick III

Now from an unspecified reason, the Telekom changes the model name with each generation between the two manufacturers Huawei and Alcatel. The first Speed Stick came from Huawei, later model from Alcatel, so now Huawei was on train again. In any case, the Speed Stick IV has not been a really big hit. The Speed Stick III was the best model in the range, now the Speed stick V dominates. The former is for detached in the shop and will no longer be available.

first impression

First, it is noticeable that Huawei continues to focus on shrinkage rate. The Speed Stick V is 4 millimeters smaller than Version III and with only 24 grams of even 25 percent lighter. And also the height has been reduced by the same length. Here Huawei has unfortunately saved considerably on material.

Technical Data

Under the Telekom logo hides the Huawei model with the serial identifier E3372, specifically E3372s-153. However, the LTE stick is not compatible with the device category 6 (CAT6). The Hisilicon chip allows for connections up to 150 Mbps download rate on category 4 (CAT4). If with the LTE category 6, the life cycle of the stick back should be far more than 1 year. Thus it can be assumed that there will be an extra Surfstick for LTE-Advanced. Another positive feature relates to the network compatibility. The Speed Stick V supports LTE on the frequencies 800, 900, 1800, 2100 and 2600 MHz. If 4G network is unavailable, it is possible to switch to GPRS, EDGE, UMTS or HSPA. This is done as always automatically and is based on the next best alternative available locally. In this regard, there are no changes to the Speed Stick III.

As usual, Huawei E3372 is also possible to be used as storage, if a microSD is implemented in the slot. The card may be up to 32 GB. The customer can switch an external antenna for reception optimization. And there are 2 CRC-9 ports ready on the side. And the SIM card is on the standard format (2FF). So if you have a micro SIM, it requires an adapter. And there is not SIM lock as usual.

Availability

The Speed Stick V is available at online store www.4gltemall.com. With the Speed Stick V, user can get good network support as a successor of Speed Stick 3. In our opinion, this is currently one of the best sticks on the market.

ZTE MF287 3neo LTE Cat6 Router Review

If you are looking for the latest new 4G Router with special design and supporting LTE-advanced network, you’d better have a check the ZTE MF287 4G Router which looks not like a common router. The MF287 router was presented by ZTE at CES 2016, and now it’s introduced to the carrier “3” in Austria and named “3neo”.

The 3neo design is hard to describe, below is the image in white color. In the middle, there is a line of blue color, which should be the indicator for power and network. At the bottom side, the Drei logo is listed.
ZTE MF287 3neo (4)
Strong and reliable router
With the modern design, you may curious about the technical specifications of the 3neo ZTE MF287. The 3neo LTE Router could support 4G LTE advanced Category 6 and achieve up to 300 Mbit/s for downlink and 50 Mbit/s for uplink. It is also equipped with 2.4 GHz and 5 GHz dual band WLAN and connects a total of up to 64 devices simultaneously to the Internet. 4 Gigabit LAN connections are also available.

Modern design

An LTE router now has to convince on all levels. These include ease-of-use, powerful and reliable performance, a modern mobile and wireless standard, and, of course, a cool design. Today, the ZTE MF287 3neo router can do these best. The 3neo router has to fit into every room with other furniture; the appearance of the 3neo was designed not as usual but the white color makes it looks not too special and just like one furniture.

ZTE MF287 3neo (1)

Battery on board

The 3neo has a built-in battery that performs well in the event of a power failure or on the go. When delivered, the battery can be activated online at any time on the configuration page. If no data transmission with other devices, the 3neo automatically switches to energy-saving standby. If you still need WLAN, the LTE router is ready for use again at the push of a button. Depending on the usage, the battery power is sufficient for up to 4 hours.

Plug & Play with QR code

In order to install your 3neo, you do not have to have any technical knowledge. Even SIM card and battery are already preinstalled. The principle of the 3neo is as simple as saving time, namely “PnP(Plug and Play)”. This is especially convenient with the 3Home app. User simply scans the QR code of your 3neo and you will be connected to the WLAN without complicated password input.

3Home App & Online Settings

The operation of 3neo is very easy, user can download the 3Home app to the smartphone or tablet and then can remote control the LTE router. They are free for Android and iOS, so you can do the installation, the operation and various settings in the app. Further settings could also be done via web configuration page as usual.

Guest access and WLAN timer
With Sleep Mode, you determine the time when WLAN and Internet connection are generally deactivated. You can set up a WLAN-free nighttime or keep the interactions of your children with the Sleep Mode under the handle. Another feature: The WLAN access for friends or relatives can be managed by QR code via the 3Home app. The additional entry of guest passwords will thus become invalid.

With the 3neo LTE Router, the streaming of films, the playing of online games, the supply of all family members with lightning fast Internet could be fulfilled. Below are the features and technical specifications of ZTE MF287/3neo for your reference.

ZTE MF287 Technical Specifications
Top features
Category	LTE Category 6
Download speed	Up to 300 Mbit/sec.
Upload speed	Up to 50Mbit/sec.
Power supply	Socket (AC adapter 12V / 1.5A – cable included in the package)
Internet connection	WLAN + 4 x LAN
Number of connections	Up to 64 devices
General information
Battery	3080 mAh
Dimensions	220 x 110 x 106 mm (including socket 18mm)
Weight	730g with battery
WIRELESS INTERNET ACCESS
802.11a/b/g/n/ac	Yes
Dual-band:	Yes
Connections
RJ11	Yes
RJ45	Yes
USB (number of connections)	Yes – 1x (only for manufacturer diagnosis)
Sim Type	Standard SIM Card
Tech features
External antenna	Yes
Bridge Mode	No
DMZ	Yes
SSID	Yes
Guest SSID	Yes
Port Forwarding	Yes
Watchdog Service	Yes
DHCP Settings	Yes
Network selection	Yes
APN Settings	Yes

Netgear Presents Nighthawk M1 Gigabit LTE Mobile Router

Netgear introduced the Nighthawk M1 LTE Hotspot –the world’s first Gigabit LTE router a few days ago. The Netgear M1 with model number MR1100 has a Qualcomm modem with LTE Category 16 and reaches speeds of up to 1 Gbit/s in the downlink under correspondingly developed mobile radio networks. Up to 150 MBit/s can be achieved in the uplink. Also the other technology of the M1 hotspot is very up-to-date, for example, there is a Gigabit RJ-45 LAN port, dual band WLAN-ac and a removable battery. The Nighthawk M1 is currently available only in Australia by Telstra.

Netgear Nighthawk M1

The Netgear Nighthawk M1 MR1100 differs significantly from the other Netgear LTE Hotspots in the “AirCard” series. The Nighthawk M1 router is in square shape, about 10cm wide, 2cm high and 240g heavy and offers in the center a 2.4 inch round color display. The core feature is Qualcomm’s modem, which supports 4.5G or LTE Advanced Pro with LTE Cat16 (up to 1 Gbit/s downlink and 150 Mbit/s uplink). These high speeds are supported by the 4 × 4 MIMO, 4-Band Carrier Aggregation technologies and 256QAM modulation, but the mobile network must support these features in order to reach the maximum bandwidth. The hotspot of course also works in mobile networks using, for example, only 2 × 2 MIMO and 64QAM.

Netgear Nighthawk M1 MR1100 4GX Gigabit LTE Mobile Router

Technical features

The connection from Nighthawk M1 to the terminals is optionally via USB, LAN or WLAN. For the USB connection, you can use the supplied USB Type C charging cable, and for the data connection, the USB type C connector is used, not the full-size USB connection (the latter is only for the Powerbank function). Alternatively, the RJ-45 Gigabit LAN connection can also be used for the internet connection. Most users will probably use the WLAN, and up to 20 devices can be connected to the router at the same time. The WLAN works in dual-band operation on 2.4 GHz and 5 GHz on request, WLAN-ac is of course supported. In addition, Netgear Nighthawk M1 has again integrated the “WiFi Offload” feature, which can be used as an Internet access (also known as WLAN extender/WLAN repeater). What’s more, there are two TS-9 connector in the M1 hotspot for external LTE antenna. If you are looking for a 4G/LTE external antenna for Nighthawk M1, we have one to recommend: http://www.4gltemall.com/4g-antenna-two-ts-9-connector.html

Netgear Nighthawk M1 MR1100 4GX Gigabit LTE Mobile Router

The Netgear Nighthawk M1 Hotspot has a 5040 mAh battery and supports the Qualcomm QuickCharge 2.0 technology. With the help of a QC 2.0 capable power supply, you can charge the battery up to 75% faster than with a regular power supply according to Netgear. The operating time has been further improved by the strong battery compared to the predecessor AirCard 810, with one battery charge, the Nighthawk M1 can keep working for a full day (around 24 hours).

Netgear Nighthawk M1 MR1100 4GX Gigabit LTE Mobile Router

Unfortunately, the Netgear Nighthawk M1 LTE mobile router is not compatible with the Netgear DC112A docking station, although it is not available for so long. With the DC112A, one can connect Netgear LTE hotspots such as AC785, AC790 or AC810 and thus turn into a full-fledged stationary LTE router. After all, the Nighthawk M1 with the integrated RJ-45 LAN port offers an alternative and is also suitable for stationary use.

Availability

Currently, the Netgear MR1100 Nighthawk M1 Hotspot is only available in Australia with the local mobile network operator Telstra. According to the information from somebody who was able to watch the Nighthawk M1 at the CES in Las Vegas, the Netgear M1 Gigabit mobile router would be available for more carriers in Europe.

Netgear Nighthawk M1 MR1100 4GX Gigabit LTE Mobile Router

Since many carriers over the world haven’t provided the 1 Gbit/s on all networks, the full LTE Cat16 performance of the Netgear Nighthawk M1 will not be available for the time being. Even though, considering the strong battery as well as the RJ-45 LAN connection, user can benefit even in slow mobile radio networks!

Huawei E5785 LTE Cat6 Hotspot Released

We had introduced the four recommended 4G LTE Cat6 mobile hotspots previous, here now a new mobile hotspot with LTE cat6 (downlink speed up to 300Mbps) released by Huawei. If you are looking for a mobile LTE Hotspot with LTE Cat6, you get a new option. The manufacturer Huawei offers the device named Huawei E5785. The LTE router with battery is technically strongly related to the predecessor model Huawei E5786, but offers a replaceable battery. In the download the E5785 MiFi reaches up to 300 MBit/s, in the upload up to 50 MBit/s.

Huawei E5785

The Huawei E5785 is available in black and white and has a small display on the front, which displays status information such as the reception and the data volume consumed, but the display cannot be operated. We also introduced the predecessor sister model Huawei E5787 mobile WiFi, which is still the only router in the Huawei range that has a touchscreen display. The battery of the Huawei E5785 offers a capacity of 3,000 mAh and can easily be changed by the user. According to the manufacturer, approximately 12 hours of operating time are possible with a full battery charge.

The Huawei E5785 provides a micro USB port for charging and data transfer. In addition, there are two connections for an external LTE antenna(Check Huawei E5785 external 4G antenna). The WLAN module works on 2.4 GHz and 5 GHz, up to 16 devices can be connected to the hotspot at the same time. Whether a WLAN Extender function was installed, is not known yet. The Huawei E5785 MiFi is operated either via a browser web interface or via an app from Android and iOS devices. Some basic settings can also be selected directly on the device, using both the menu button and the power button directly on the E5785.

Huawei E5785 (1)

Availability of the Huawei E5785

So far, the Huawei E5785 LTE Cat6 Hotspot seems to be available in Europe only in Poland, with the providers Play and T-Mobile. The exact model number for the Polish market is E5785Lh-22c; the Huawei E5785 is also easily usable in other European countries due to the support for LTE 800, 1800 and 2600 MHz (band 20, 3, 7). However, you should be careful with other E5785 model numbers in Asia and the Middle East, which may support other frequency ranges. We will update more information about the Huawei E5785 later.

Huawei B310 4G LTE Router Review

Every year, Huawei would present some new 4G Router to meet the market demand. Now we have the new 4G router B310 and we will have a review about this new router in the article.

With the Huawei B310 Router, you can share your data plan using Wi-Fi or Ethernet. And it has other functions which are very useful for many people, we will introduce the features in this review.

Technical Specifications of Huawei B310

Manufacturer and model	Huawei B310s-22 (There are other variant models)
3G Network Bands	850/900/1900/2100
Bands / Category 4G LTE	B1, B3, B7, B8, B20, LTE Cat 4 DL 150/UL 50 Mbps
Connectivity	Wi-Fi IEEE 802.11b/g/n with a range of 200 meters LAN IEEE 802.3 / 802.3u
Ports	Ethernet port, telephone port, two connectors for external 4G antennas of 1dBi each (included) and DC connector.

Design

Here we can find the LTE CPE B310 that has a very simple design, so it is pleasant to use with the furniture at home, and it occupies very little space. The equipment material is totally plastic like any other router or similar devices such as Huawei B593 and Huawei B890 Router.

HUAWEI B310 4G Router wifi (1)

On its front, we find four illuminated icons that indicate the status of the router. The first one (from left to right) indicates that the B310 router is power on, the second shows the status of the connected network (3G, 4G … etc) using colors, the third indicates the status of the Wi-Fi network, the forth indicates the status of the Ethernet connector and finally we have the operator’s signal bars.

At the top we find the power and WPS buttons, the latter is to allow compatible devices to connect to the Wi-Fi network without entering the password.

At the back we will find the two external antennas, below we will see the current connector, the Ethernet port and a telephone line connector. We also see a cover, which when removed will allow us to insert our SIM card (mini SIM format) at the side.

HUAWEI B310 4G Router wifi (5)

Ethernet / LAN / WAN

The main function you will find on this router is precisely the ability to share your 4G, 3G or 2G data connection via Ethernet or WiFi with many connected users. The WiFi range could cover around 200 meters. The connection is super easy, just connect the modem of your internet provider via Ethernet cable to the Huawei B310 and configure it according to the type of connection that your provider uses.

As an additional feature, the router will also offer you the possibility of cloning a MAC address, if necessary.

WiFi

Per my personal experience, I usually have to use Wi-Fi extenders at my home, but with the Huawei B310 Router, it was unnecessary to have the extender, so the WiFi coverage from B310 CPE is really trustful. Also, the speed I had turned out to be very good and with a low ping when connecting.

In terms of configurations, the B310 router is capable of broadcasting up to 4 Wi-Fi networks and each can adjust the frequency channel manually, having channels 1 through 11.

HUAWEI B310 4G Router wifi (3)

As for security, you can decide whether to leave the name of your Wi-Fi network visible or not, in addition to being able to select a WEP, WPA2-PSK or WPA/WPA2-PSK password. If you want even more security, you can filter up to 10 quotas using the MAC address of each device.

Security

The Huawei B310 router turned out to be pretty perfect, in fact I thought it was something simpler, but I was very wrong. Here we can configure a firewall, filter by MAC and IP address, even virtual servers to protect our devices.

You can also open ports easily, apply DMZ configurations, enable UPnP, adjust NAT, filter by domain names or apply Dynamic DNS.

HUAWEI B310 4G Router wifi (6)

Phone Function

Something that totally differentiates from the other 4G routers is the possibility of being able to connect a fixed telephone and make & receive calls using the mobile network of your operator.

You pick up the handset and the Huawei B310 router itself will tone your fixed network phone, being ready to call any phone number, as long as your mobile operator allows it. It’s as if you were making a call from a cell phone, but here you do it from a landline. You can also receive calls in it, and if the landline has a viewfinder, you can see the number of the person who is calling the number assigned to you by your mobile operator.

This function proves to be quite useful for those who want to have internet and telephone in a single device. With the Huawei B310, you will have Wi-Fi internet and fixed network telephone to call and receive calls.

Conclusion

There are many 4G Routers in the market and we had the opportunity to try several models, but I personally like the Huawei B310 router much more than the others, since I found it quite useful in terms of functions.

The first thing I liked was its Wi-Fi coverage, which reaches up to 200 meters, which in my case was more than enough to keep me good signal throughout my house without WiFi extender.

The external antennas that this router brings, served me enough to improve the reception of the signal from the operator, as this LTE CPE B310 makes the signal is received much more intensely than what you currently receive on a smartphone, which ensures you a very good service.

I personally used Vodafone 4G network and shared it via Wi-Fi in my house, reaching speeds in excess of 50Mbps, which I found remarkable. And since I do not have a fixed telephone at my house, I took advantage of connecting one to this router. The latter is very useful for people who do not have a fixed Internet and telephone service, in addition to saving a lot of money in the monthly fixed charge, having the freedom to choose the plan yourself which suits you.

Considering the full practical functions for users, we would certainly recommend it as an excellent alternative.

Availability

The Huawei B310 4G Router is available locked with network providers, but you can also get the unlocked units from www.4gltemall.com . With unlocked one, you can change your network provider if you are unsatisfied with the networks or services. And you can even take the unlocked Huawei B310 Router to other countries or areas and work with the compatible network providers. And actually, the Huawei B310s-22 has many brother models such as B310s-927, B310As-852, B310s-518 etc. They are for various LTE network providers and compatible different network frequency bands. So before you buy the router, choose the right one for your location and your network provider.

Huawei B525 4G LTE Cat6 Router Released

Huawei presented a new 4G LTE advanced Router with carrier aggregation. The model number is B525, also named Huawei 4G Router Prime. With LTE cat6, Huawei B525 could achieve download speed to 300Mbps and upload speed to 50mbps. The similar predecessor Huawei E5186 router was available for almost two year and it’s the most popular 4G LTE Cat6 router.

Huawei B525 is the latest desktop router LTE this manufacturer. It combines the advantages of the well-known devices Huawei B315 and B310 router. Users can use the interface WLAN 802.11ac (max. 786 Mbps) or 4 Gigabit LAN ports. Huawei B525 router allows you to get connections for up to 64 wireless devices with transfer speeds up to 300 Mbps in LTE category 6. This means that the the use of the network is very fast and convenient regardless of the intensity. Even when using multiple devices at the same time you can browse the Internet or transfer data without losing liquidity connection.

HUAWEI B525 B525S-23A (2)

The B525 Router will also likely equipped RJ11 port for voice, which will provide telephone communication in the GSM network (2G / 3G) or based on VoIP technology (3G, 4G). Huawei router B525s has two SMA connectors for connecting external antennas and it allows you to connect up to four devices using the standard LAN ports, what’s more, up to 64 devices could access internet through WiFi. It’s perfect for people who often need to share mobile internet for several devices at the same time.

HUAWEI B525 B525S-23A (3)

To connect to the internet, you need only a few minutes. Just follow the instructions”Quick Setup” included within the web interfaces and you will enjoy access the network through Huawei B525S Router. Below are the details specifications for Huawei B525 for reference.

Huawei B525 Specifications:
* Max. Transfer speed: 300 Mbps (DL) / 50 Mbps (UL)

* Backwards compatibility: 3G, EDGE, GPRS

* Frequencies of operation:

– LTE FDD 800/900/1800/2100/2600 MHz

– Dual-band HSPA+ – 900 / 2100 MHz

– Quad-band EDGE / GPRS – GSM 850/900/1800/1900 MHz
* Standard WLAN: 802.11 a / b / g / n / ac

* Ethernet RJ-45: 4x 10/100 / 1000Mbps

* Internal WLAN antenna

* Socket for external antenna: 2 x SMA

* Phone Jack: 1x RJ11 (VoIP, CS voice)

* Local management of the browser

* Dimensions: 226 x 153 x 52 mm

* System requirements: Windows XP SP3 or later, Mac OS x 10.7 or later

* Built-in slot for the SIM card: yes (microSIM)

* Sim lock: no

HUAWEI B525 B525S-23A (4)

If you need the external antenna for Huawei B525 Router, we would like to recommend below the two antennas. We had tested the antennas and they can work well with Huawei B525 LTE Router:

http://www.4gltemall.com/4g-antenna-two-sma-connector.html

4G LTE Indoor Antenna (2 x SMA Connectors) for Huawei/ZTE 4G LTE Routers/Gateway/LTE CPE

If you prefer 4G outdoor antenna to get better signal, you could try below the antenna:

http://www.4gltemall.com/4g-lte-outdoor-antenna-2-x-sma-connectors.html

4G LTE Outdoor Antenna (2 x SMA Connectors) for Huawei/ZTE 4G LTE Routers/Gateway/LTE CPE

Huawei E5771 New 4G Pocket WiFi Router

As the famous vendor for mobile MiFi 4G routers, Huawei offers us a new model that succeeds to Huawei Mobile WiFi Pro E5770. With a notable feature, the new model Huawei E5771 does not have an LCD screen.

huawei E5771

The highlight of the Huawei E5771 Mobile WiFi is the huge 9600 mAh internal battery (non-removable) that provides up to 38 hours of operating time.

HUAWEI E5771

On the other hand, the E5771 has a small LED’s on the slice, which indicate the essential information, one for the data transfer activity, the other 4 indicating the status of the battery. In addition to these LEDs, the power button on the upper face and having the initials “Hi ” comes alive with different colors of green, orange and red, indicating the reception quality of the 3G/4G signal.

HUAWEI E5771

Of course and as usual, all the indications SSID, Wifi password and Barcode to flash for a smartphone, are located under the hood of the Huawei E5771. Still under the hood, there is a SIM card slot in micro-SIM format and the slot for a micro-SD storage card (up to 32 GB), for storing data. The connected devices with E5771 could share the data in the storage card.

HUAWEI E5771

To configure and administer the Huawei E5771 Mobile Hotspot, user can log in a web interface accessible not only from a PC, but also access from the Hi-Link application for smartphone, which gives you access to essential functions.

On one side of the Huawei E5771, there are 2 USB ports, one in full size is designed to recharge a device such as a smartphone, thanks to its 9600mAh battery, and the other one is in micro-USB allowing charging of the E5771 hotspot.

HUAWEI E5771

The Huawei E5771 Hotspot comes with its charger, but also with its USB cable to connect the micro-USB port to the charger or the port of a PC. The special feature of this cable is that it also serves as a carrying strap for the case. It’s not stupid to have it always with you.

HUAWEI E5771

Huawei E5771 Specifications

Huawei E5771 is a 4G Category 4 router, allowing you downlink of up to 150 Mbps and uplink to 50 Mbps. The supported frequency bands are:

* (4G) LTE FDD 850/900/1700/1800/1900/2100MHz

* (4G) LTE TDD 1900/2300/2500/2600MHzMHz

* (3G): DC-HSPA+/HSPA+/HSUPA/HSDPA 2100/1900/1800/1700/900/850/800MHz
* (2G) GSM / GPRS / EDGE 1900/1800/900/850MHz

HUAWEI E5771

It is therefore compatible with almost all the operators over the world. And there are many variant models for various network frequency bands such Huawei E5771s-852, Huawei E5771s-856, Huawei E5771h-937 etc.. The Wi-Fi standard is 802.11 b/g/n; 2.4GHz (no ac 5GHz) , and it supports 10 simultaneous wireless users. The battery is given for 38 hours of operation and 500 hours in standby, it is not removable.

The HUAWEI E5771 is now available at www.4gltemall.com for a price of $ 189USD. There are 3 colors are available, White, Black or Gold.

Conclusion

For some users, the absence of an LCD is not good, since it is compensated by various indicator lights; the Huawei E5771 presents a rather nice aesthetics and especially a huge battery that offers an excellent practical function.

With the powerful network compatibility (not totally) and at an affordable price of $ 189, the Huawei E5771 is a good compromise, knowing nevertheless that it offers neither the category 6 to 300 Mbps nor WiFi ac 5 GHz. If you want a 4G mobile WiFi router with screen or with the latest LTE category 6 carrier aggregation technology, you may check the Netgear Aircard 790s or Huawei E5786 or E5787. They are the latest new models with advanced technology, but it’s a pity, they don’t have the large battery as E5771.

How to Update Huawei E5786s-32a Firmware

This article describes how to upgrade the Huawei E5786s-32a firmware to 21.297.03.00.309 firmware version. This update activates the Wi-Fi Extender function that is not implemented in the firmware of all E5786 routers, although it is mentioned in the technical specifications.

The Wi-Fi Extender function allows the Huawei E5786 router to switch from the 4G network to a WiFi network available around so that you can access the WiFi network, in order to save your Data plan. If the WiFi signal is lost, the router switches automatically to the data network.

Disclaimer:

This operation is absolutely not supported by the manufacturer HUAWEI, in case of error during the operation of flashing of your firmware, you could make your router inoperative and totally out of service. At the slightest doubt or error message, do not continue the operation. On the other hand, by performing this operation, you lose all guarantees for your device, and any repair operation would be at your expense. We 4gltemall.com are not liable for any damages on your device if you carry out this operation which takes place at your own risk.

We started with the following versions of the software (firmware) and WEB GUI (UI) installed by default on the E5786 in our possession:

Hardware version: CL3E5786SM

Software version: 21.297.03.00.309

Web UI Version: 17.100.05.00.309

To upgrade to following software (firmware) and WEB GUI (UI) versions:

Hardware version: CL3E5786SM

Software version: 21.303.07.00.00

Web UI Version: 17.100.09.03.03

Update of the 24/11/2016(New versions):

Hardware version: CL3E5786SM

Software version: 21.313.17.00.00

Web UI Version: 17.100.14.01.03

The new firmware version essentially fixes security issues related to open-ssl.

First of all, you have to install the HUAWEI drivers, for this we recommend installing the application “Mobile WiFi” whose sources are on the flash memory of the router. This application installs the appropriate drivers for a full USB connection.

Use a good quality USB data cable to connect your router to your PC, we recommend that you use the one provided with the device. You should see a drive containing the application; we installed this application in version 1.12.00.309 on Windows 10 without difficulty. Once this application is installed, the firmware update program is able to communicate with the E5786 Router.

Operations

When your router is detected after launching the program, the program may ask you for a flash code or flashcode in a small window that opens, be careful, it is not a network unlock code, but a code that allows the firmware to be updated.

To obtain the code of flashing, it is necessary to identify the IMEI number of your device, it is generally written on the box and the body label of the device. We can give you the flashing code, this operation is absolutely free.

Huawei_E5786s-32a_Update_21.303.07.00.00.zip

(MD5 sum 392d4c74c7ab254fa42726959931a690)

Huawei_E5786_WEBUI_17.100.09.03.03_NE5.zip

(MD5 sum c55a341dc5e9c6844c1f744d1fc57d39)

Update of 24/11/2016:

Huawei_E5786s-32a_Update_21.313.17.00.00.zip

(MD5 sum 4ae941e2b6d3a1a2b418f2c45f6fd11c)

Huawei_E5786_WEBUI_17.100.14.01.03_NE5.zip

(MD5 sum b0f179cc2d875c23ed03c81a45610695)

In the following procedure, simply adapt the text according to the firmware and UI versions you are using. Start by running the firmware update 21.303.07.00.00. Make sure your PC is properly charged if you are using a laptop, and that your E5786 is also fully charged so you do not risk a battery failure during the software update. And the update process would not be suspended.

We recommend that you disconnect the network connection of the PC you are using and then disable your antivirus to avoid interference with the flash.

Then start the program Huawei_E5786_Update_21.303.07.00.00.exe right click “run as administrator” under Windows. A dialog box starts by scanning the USB ports of the PC looking for the device, if it does not find it; make sure that your drivers are properly installed. It is during this phase that the program is likely to ask you for the code of “flashing”.

Your device will restart, in principle your settings are retained, but you will have to re-enter the PIN code of the SIM card.

When the operation is finished, you must update the interface

Web UI Version: 17.100.09.03.03

Select the program 2_Update_WEBUI_17.100.09.03.03_NE5.exe right click “run as administrator” under Windows. The sequence is identical to the previous phase, but you will not be prompted for the flash code.

After updating the 2 elements, your interface offers several languages; choose the one that suits you.

And you will see the new home page.

In the new home page, you can see a WiFi Extender button at the right side of the ON/OFF and DATA buttons. In the settings you will now see a “WIFI Extender” column.

This Wi-Fi Extender menu allows you to select a WiFi network and enter the security key. The priority menu is used to define whether the router should automatically connect to the WiFi network. Please note that now you will also find the Wi-Fi Extender menu in the Hilink app on Android or IOS as well as in the internal menu of the router.

If you would like to know more about Huawei E5786, welcome to click here: http://www.4gltemall.com/huawei-e5786-4g-lte-cat6-mobile-wifi.html

Huawei E5787 4G LTE Mobile Hotspot

A new router successor to Huawei MiFi E5786 Hotspot has appeared on the market in early summer last summer, it is the Huawei E5787, also named Huawei E5787 Mobile WiFi Touch.

Huawei E5787

The Huawei E5787 Mobile WiFi Touch is a 4G+ category 6 router, allowing a download speed of 300 Mbps and a download speed of 50 Mbps. Always broadcasting WiFi 802.11ac, it broadcasts on the 2.4 GHz and 5 Ghz frequencies. It is of course backwards compatible with 2G and 3G and supports 802.11 b/g/n in addition to ac.

There are 2 main novelties for this E5787 compared to its predecessor Huawei E5786.

A large 2.4-inch screen is now in front, but most importantly, it is tactile and gives access to operating and configuration menus. This functionality gives it the nickname of WiFi touch. The screen of Huawei E5786 can only show the connection status and data consumption, if users want to operate the setting for WIFI and password, they have to log in the web page to setup.

Unlike the E5786, the battery of Huawei E5787 is removable. This 3000mAh battery gives 12 hours of autonomy to this router. The battery of E5786 can’t be removed.

For the rest of the characteristics, we can find more features as below:

1. Capacity of 10 simultaneous Wifi users.

2. Possibility to connect a PC via the micro-USB port.

3. The two TS-9 connectors for an external antenna.
4.
With nano HPM Cortex A9 processor, it supported 4G bands are:

* LTE FDD: 1/3/5/7/8/20 (800/850/900/1800/2100/2600MHz)
Note: It still lacks the 700 MHz (B28).
* LTE TDD: 38/40/41 (2300/2500/2600MHz)
5. Dimensions of 109 x 58 x 7.5mm, therefore significantly thinner than its predecessor E5786. And the weight of 155g, it’s easy to take away when on the go.
6. One micro SD card slot, connected users could share files in the SD card plugged in.

huawei-e5787-e5787s-33a-mobile-wifi-touch-2

We can find the metallic border that surrounds the case, which is the high-end smartphone way. Moreover, the Huawei E5787 router is available in different colors, such as Black, White, and Silver. You will have to wait a little to acquire it, because it is available only in rare countries, but no worries, you can get unlocked Huawei E5787 from www.4gltemall.com. You don’t need worry about the compatibility because it supports many LTE 4G bands. We will take the test for Huawei Mobile WiFi Touch E5787 in near future.