Huawei B5328 4 X 4 MIMO LTE Router News

Released in at the beginning of 2016, Huawei B5328 LTE Router is only distributed to few telecom operators who wish to offer it to their customers with a 4G offer till now. As we know, it’s now available only for the network provider Mobilis in Algeria, and other carriers such as China Mobile, Vodafone are trying to test their network with the new 4 X 4 Mimo technology.

Huawei B5328 Front logo and indicators

The particularity of this B5328 LTE router is that it is one of the few devices to offer a LTE-A 4X4 MIMO technology. Based on the GCT’s GDM7243Q, the only LTE-A chip commercially available that offers 4×4 MIMO capability, enables Huawei B5328 LTE CPE with higher data rates and throughput while using limited bandwidth (“double speed” with the same limited bandwidth), which is a scarce commodity for network operators.

gct-gdm7243q

GCT GDM7243Q chipset features:

* Supports FDD-TDD LTE Cat5/6/7

* Cat5 LTE with 4×4 DL MIMO: 300Mbps DL, 75Mbps UL

* Cat6 LTE with 4×2 carrier aggregation: 300Mbps DL, 50Mbps UL

* Cat7 LTE with 4×4 MIMO or carrier aggregation with 300Mbps DL,100Mbps UL

* Supports 4×4 DL-MIMO (4 layers) and 2X2 UL-MIMO (2 layers)

* 3GPP Release 10/11-compliant

* Supports eMBMS, OTDOA, TM8/9/10

* Single RF solution for FDD and TDD LTE

* Inter/Intra carrier aggregation (class C : 20+20MHz) for DL and UL

* Enhanced iCIC inter-cell interference cancellation

* Dual processor architecture: ARM Cortex-A7 with 832MHz clock frequency. Application CPU + Modem CPU (LTE)

* On-Chip VoLTE (HD-Voice)

* SoftAP for external WiFi client

 

gct-gdm7243q4x4-mimo-lte-a

GCT GDM7243Q Semiconductor

GCT GDM7243Q chipset is often used on 2X2 MIMO for telecom, which has few advantages, but its availability makes it possible to use 4X4 MIMO in near future.

Huawei B5328 interfaces

In this version Huawei B5328-155, it has a single Gigabit Ethernet port and the WiFi band is only on 2.4 GHz, which seems not enough for a high-end router, and the 4 x 4 mimo technology is only highlights.

After the Algerian Internet users who have the possibility to use this B5328 router via the operator MOBILIS, Vodafone also carries out tests in 4X4 MIMO on its 4G network. And it seems that the operators in German, Switzerland and Austria are in discussions with Huawei.

Huawei B5328 accessories

Here now, the latest 4G LTE Router is Huawei E5186, which is LTE Category 6(Rel 12). After Huawei presents the B5328 LTE CPE, we would expect more similar 4G LTE Routers available in near future. Of course, the routers would do their best performance after the network carriers upgraded their networks.

 

Sierra AirPrime EM7455 LTE-A Module in M.2 Format

Sierra Wireless offers an embedded 4G connectivity module in M.2 size. The model number is Airprime EM7455. For the market OEM, the new AirPrime module is based on the LTE modem Qualcomm® Snapdragon ™ X7 with Qualcomm latest Technologies.

sierra-airprime-em7455-4

This EM7455 card supports LTE-A Category 6 connectivity, which could achieve download speed to 300 Mbit/s and up to 50 Mbit/s for upload. The frequencies covered by this module cover the LTE bands B1-B5, B7, B12, B13, B20, B25, B26, B29, B30, B41. On these LTE frequency bands, the Sierra EM7455 could almost all the network providers over the world, which means the Airprime EM7455 could be used globally.

What’s more, the EM7455 module supports 3G frequencies are B1, B2, B3, B4, B5, B8. The supports bands cover all the UMTS network providers. So the EM7355 could also work well when LTE network is not available.

There is a predecessor model “AirPrime EM7305“for LTE Category 4 exploiting the 4G LTE bands B1, B3, B7, B8, B20 and support peak download speed to 150mbps and upload speed to 50mbps, which is only half of the speeds from Sierra EM7455.

sierra-airprime-em7455-3

The drivers of Sierra EM7455 are available for Windows® 7, 8.1 and 10, Android, and Linux, allowing for extensive operation.

With dimensions of 42 x 30 x 2.3 mm, this Sierra AirPrime EM7455 module can be placed in many objects, no doubt that we will find it soon in our daily life, such as LENOVO laptops.

Sierra Wireless also provides other products, such as a series of mini cards to the PCI Express standard with a USB 2.0 interface. If you would like to see more Sierra Wireless products, welcome to check here: http://www.4gltemall.com/4g-brand/sierra-wireless.html

Huawei E5186 LTE Advanced Router for Cat6 300Mbps with VoLTE

By the end of 2014, the LTE Advanced networks with 300 MBit/s available in many countries and carriers, and then all need urgently LTE CAT6 enabled routers. Huawei has already introduced its LTE Advanced Router Huawei E5186 to the public around the middle of 2015.

Huawei E5186 E5186S E5186S-22 Router

The Huawei E5186 router is the star for LTE cat6, therefore, the largest LTE mobile network provider Telekom and Vodafone both offeredidentical models to the E5186. It is the Vodafone B4000 router and the Telekom Speedbox LTE III.

As the leading new routers for wireless network, the technical specifications of the Huawei E5186 are absolutely outstanding. LTE support includes all LTE frequency bands used in Europe. The router is also downwards compatible with all common older mobile radio standards. Theoretically, the Huawei router can also be used in an EDGE mobile network. You get a router for all networks.

Huawei E5186 E5186S E5186S-22 Router

By the way, not only the LTE data transfer is super fast, but also the wireless data transmission to the WLAN, 802.11ac standard is currently second to none.

Here the exact technical specifications:

Huawei LTE Advanced router: Huawei E5186s-22 with HiSilicon Category 6 LTE modem

Support LTE:

4G FDD LTE: LTE800/LTE900/LTE1800/LTE2100/LTE2600 with FDD LTE.

4G TDD LTE: LTE 2600 MHz for TDD

These are the LTE bands 1/3/7/8/20/38

FDD speed up to 300 Mbit/s for download

FDD speed of up to 50 Mbit/s for upstream

TDD speed of up to 20 Mbit/s in the upload

Support UMTS/DC-HSPA+/EDGE:

3G: UMTS 900 MHz and UMTS 2100 MHz

DC-HSPA+ speed with up to 42 Mbit/s downstream and 5.7 Mbit/s upload speeds

HSPA+ speed with up to 21 Mbit/s downstream and 5.7 Mbit/s Upload

If even 11 MB/s are provided technically in upload with HSUPA possible

EDGE and GSM with 850/900/1800/1900 MHz

Huawei E5186 E5186S E5186S-22 Router (6)

WLAN support

There can be up to 64 wireless devices connected

WLAN 802.11b/g/n and Wi-Fi 802.11ac with 2.4 GHz and 5 GHz

WLAN encryption WEP, WPA and WPA2

Support WPS

Integrated VoLTE telephone system

Two analog telephone ports with RJ 11 sockets for VoIP SIP Client

Voice over LTE support (VoLTE)

Without DECT and voice mail

Safety

Firewall, encryption, ICMP support, DNS relay support, NAT, watchdog, ARP support

Huawei E5186 E5186S E5186S-22 Router (5)

Antennas

Support 2 x 2 MIMO antenna technology

Internal 2 × 2 MIMO LTE antenna

Connections for two external LTE antennas are the E5186 available

Buy Huawei E5186 External Antenna (two SMA connectors) here: http://www.4gltemall.com/4g-antenna-two-sma-connector.html

Network

LAN switch with 4 x 1 Gigabit Ethernet connections

Interfaces

USB 2.0 port for printers and mass storage

Connector for external antennas through two SMA connectors

2FF SIM slot | Router is no SIM Lock, completely free

Two RJ11 analog phone ports

Four RJ45 network LAN connections

Power supply connection

Huawei E5186 E5186S E5186S-22 Router

Other features

IPV6, CS Voice, http Online Upgrade, Print, VPN, DLNA, TR069 remote management, QoS, UPnP, USB Share

On/off switch on the rear

Dimensions: 194 x 177 x 64 mm

Weight: 450 g

Router Color: white

Software support

Windows 7, Windows 8, Mac OS

Why do you need LTE Advanced?

LTE Advanced is the latest LTE technology with which you can realize the fastest transmission speed with data rates of up to 300 MBit/s. Many carriers all over the world want to introduce LTE Advanced in order to offer their customers faster Internet access experience.

Integrated Huawei VoLTE telephone system

With the Huawei E5186 router, one can connect the telephone via Voice over IP (VOIP). On the router itself, two telephone lines with RJ11 jacks can connect two analogue phones for VoLTE telephone .

Advantages over traditional telephone:

Faster call setup, HD Voice call quality and telephone via the SIM card in the router. And the lucky thing is that many carriers already provide the VoLTE functions in their networks. Then if you want to have better surfing experience, Huawei E5186 is the best key and good partner!

Five LTE Cat6 Home/Office Routers to Recommend

More and more people are enjoying the life with 4G LTE networks, which changes our lives invisibly. Even LTE is more and more popular; many customers are demanding faster surfing speed for large data transmission or online games. And the network providers are not stopping at the current LTE cat3 and cat4 networks. Many carriers are trying to upgrade the current LTE to LTE –Advanced to meet the customers’ requirements for better experience. With the upgraded LTE networks with carrier aggregation, customers can get much faster speed on LTE cat6 than current LTE cat4. Today, we would like to recommend a few LTE Category 6 routers for home or SOHO office.

lte-cat6-max-download-speeds-and-upload-speeds

Huawei B525

Huawei B525 is the latest 4G Router Cat.6 supporting DL speed to 300mbps and upload speed to 50Mbps, please check the details specs below:

Model Huawei B525
Product type LTE WiFi Router with Ethernet port
Category LTE Cat.6
Chipset HiSilicon LTE Cat6 Chipset
Data rates DL 300Mbps/UL 50Mbps
Supported 4G LTE frequency bands B525s-23a: Band  1/3/7/8/20/32/38
B525s-65a: Band  1/3/4/5/7/8/20/19/26/28/32/38/40/41
WLAN 802.11a/b/g/n/ac, dual-band 2.4GHz & 5GHz
Max supported users 64 users
MIMO 2 x 2 MIMO
Connector for external antenna Two, SMA-female jacks
Buy Antenna Huawei B525 external antenna
App management Huawei Hilink APP
SIM Size Micro SIM
Battery NO
Dimensions 163 x 52 x 226 mm
Interfaces * 3 x LAN port(45)
* 1 x LAN/WAN port (45)
* 2 x telephone port(RJ11)
* Two external LTE antenna ports (SMA-J1.5)
* One micro-SIM card slot
* 1 x USB 2.0 port
Datasheet Huawei B525 Datasheet(PDF)
User Manual Huawei B525 User Manual(PDF)
Other features  Firewall, CS Voice, VoIP, TR069 Remote Management, HTTP Online Upgrade, QoS, USB Share, UPnP, IPV6, DLNA, Fax, Print, VPN
Firmware download Huawei B525 firmware
Driver Huawei B525 driver
Reviews Huawei B525 Review
Price/USD 259.00USD

Huawei B525 is the best buy Cat6 WiFi router, if you want to buy it, click here: https://www.4gltemall.com/huawei-b525-4g-lte-cat6-wireless-router.html

Huawei E5186

Huawei E5186 is the world’s first 4G LTE Cat6 router for LTE advanced networks. With the carrier aggregation technology, users can access internet and surfing at 300mbps download speed and 50Mbps upload. The download speed is almost double faster than that from LTE CAT4, which could achieve download speed to 150mbps. To support various LTE frequency bands from different carriers, the Huawei E5186 CPE has two sub-models now as below:

* Huawei E5186s-22a: LTE Band 1/3/7/8/20/38 (FDD 800/900/1800/2100/2600MHz, TDD 2600MHz)

Huawei E5186s-61a: LTE Band 3/7/28/40 (FDD 700/1800/2600MHz TDD 2300MHz)

huawei_e5186_4g_router_lte_cat6

Of course, the 3G DC-HSPA+/UMTS and quad-band GSM networks are backward compatible. The WiFi standard is 802.11a/b/g/n/ac on dual bands (2.4GHz and 5GHz). What’s more, the Huawei E5186 could support up to 64 wireless devices to access the internet through WiFi. And there are four RJ45 ports for LAN, one of which is also for WAN. Two RJ11 ports are for a telephone. One USB port and one SIM card slot are available. There is also the possibility to connect an external antenna to the E1586 router, on the back, there are two connectors for external antennas.

 

Huawei E5186 is a typical 4G LTE Router and as we know, it’s the best seller of LTE Cat6 router. If you want to know more details about it, click here: http://www.4gltemall.com/huawei-e5186-4g-cat6-802-11ac-lte-cpe.html

 

 

Huawei E5175

Very few people know the Huawei E5175 LTE Router perhaps because it’s also not listed in Huawei official site. And we also don’t get any information about the router available for any network providers. Perhaps it’s just a test model? We can’t get the answer.

huawei-e5175-e5175s-22-lte-cat6-router

The appearance of Huawei E5175 is similar to Huawei E5186, especially the interface ports, almost copying from E5186. It’s said Huawei E5175 is presented earlier than E5186, but it’s about to end of life. The Huawei E5175 technical specifications are the same as that of E5186 router.

If you want to know more details about Huawei E5175 4G Router, welcome to click here: http://www.4gltemall.com/huawei-e5175-4g-lte-wireless-gateway.html

 

 

Vodafone B4000

If you are familiar with Huawei wireless gateways, you may know the Vodafone B4000 is the customized Huawei E5186. The predecessor model Vodafone B3000 comes from Huawei B593s-22. On the Vodafone router, the Huawei logo is changed to Vodafone. And the firmware is customized for Vodafone. Other features and functions are completely the same as Huawei E5186.

vodafone-b4000

So if you don’t like the Vodafone brand, Huawei E5186 could fully replace Vodafone B4000. If you want to know more details about Vodafone B4000, click here: http://www.4gltemall.com/vodafone-b4000-4g-lte-cat6-wifi-router.html

 

ZTE MF286

ZTE is always following the steps of Huawei and presents similar products to huawei. So the appearance of ZTE MF286 somewhat looks like Huawei E5186. The interfaces in MF286 are the same to E5186. The chipset of ZTE MF286 is Qualcomm WTR3925 and MDM9230. But Huawei E5186 is on its own chipset. The highlight of ZTE MF286 is that there is an inserted battery with 3000mAh, which means user can take MF286 outdoor or on the go. Other features are similar to E5186. We usually say ZTE is copying Huawei, but we also see the innovation in ZTE products.

zte-mf286-lte-cat6-4g-router

If you want to know more details about ZTE MF286, click here:

http://www.4gltemall.com/zte-mf286-4g-lte-cat6-router.html

 

 

ZyXEL LTE4506 

Unlike the three LTE routers above, the ZyXEL LTE4506 is in the shape of cube, which looks like Huawei E5180 LTE Cube. LTE4506 can support up to 32 wireless users. There is a micro-USB connector for charging and a Gigabit LAN port, for connecting wired devices. Frankly speaking, the design of the ZyXEL LTE4506 is cool, if you want to know more details about it, click here:

http://www.4gltemall.com/zyxel-lte4506-4g-lte-cat6-router.html

zyxel-lte4506-lte-homespot

 

We believe there will be more LTE Cat6 router available in near future, but currently the above the five LTE routers are the best for LTE advanced networks with CA. There is no doubt that Huawei is dominating this LTE advanced technology. In the above routers, Huawei E5186 is the most popular and mostly recommended. But before you get the right one, check the network compatibility first with your carriers.

Netgear LB1110 4G LTE Modem Review

At IFA 2016, Netgear had presented the two LTE modems LB1110 and LB1111, and the LB1110 is finally arrived to the test around the end of December. The LB1110 is an external LTE modem with Gigabit Ethernet RJ45 connection, but other functions such as battery operation, WLAN or a telephone interface are deliberately omitted. The Netgear LB1110 requires an external power supply, the sister model LB1111 additionally has Power over Ethernet (PoE), ie the power can be supplied directly via the Ethernet cable. In this review, you can read more about the performance from Netgear LB1110 modem.

netgear_lb1110_lb1111-2

Appearance

The Netgear LB1110 modem is packed in a small cardboard box. Besides the device, there is also a short LAN cable as well as the power supply (with adapter for Europe and British plug format). Furthermore, there is a brief guide, which should help for operation.

 

The Netgear LB1110 is completely made of plastic and offers some green LEDs on the front for signal reception, network status and LAN connection. At first glance the modem looks solidly processed and it makes a good impression. With dimensions of 120 x 99 x 31 mm (W x D x H), it is quite compact and can also be attached to the wall if required.

netgear_lb1110_lb1111-3

Hardware & Speed

The Netgear LB1110 modem has a single RJ-45 Gigabit Ethernet port on the back. Here, a single computer can be connected directly, or the connection to a router or switch can be established. Furthermore, you will find the connection for the power supply (DC, 12V, 1A), a reset button and a power button on the back.

 

The Netgear LB1110 modem allows speeds of up to 150 MBit/s in the downlink and up to 50 Mbps in the uplink via LTE Category 4. In addition to the FDD LTE frequency bands around 800, 1800 and 2600 MHz currently in use in Europe, FDD LTE is also supported on 900 MHz and TDD LTE on 2300 MHz. UMTS is supported with the data accelerator DC-HSPA+, the theoretically maximum possible speed is 42.2 Mbps in the downlink and 5.76 Mbps in the uplink. Here, the bands are supported by 900 and 2100 MHz. As a fallback, the LB1110 modem can also use Quadband GSM.

Netgear LB1111 LB1111-100EUS

In the test, the Netgear LB1110 modem with SIM cards from O2 and Telekom was used; the tariffs had no limitation of the speed. With a good UMTS reception in the network from the Telekom, about 26 MBit/s in the Downlink were possible, with O2 it reached up to 21 MBit/s. LTE was considerably slower at O2 despite a good reception with only around 7 MBit/s – here the network was certainly overloaded. The ping times were 25 milliseconds on the LTE network and 40 milliseconds on UMTS. In the Telecom LTE network at 1800 MHz, some 130 MBit/s were possible. Depending on the location, reception and network load, these values ​​vary widely, this is completely normal.

 

The reception via the internal antennas is good and is clearly superior to that of most smartphones. Nevertheless, it may be useful to connect an external mobile radio antenna at some locations. The LB1110 has two TS-9 connectors on the rear panel. Netgear itself provides as a passive antenna, which is also suitable for mobile use.

 

Software & Operation

The Netgear LB1110 can be operated from any browser. The web interface is encrypted with a password and the PIN code for the SIM card must be entered after switching on for the first time. On request, the router remembers the PIN, so you do not have to re-enter it every time. By the way, the SIM card is inserted in a small compartment on the back of the LB1110, a MicroSIM is required, but a Nano SIM with adapter is also OK.

Netgear LB1111 LB1111-100EUS

 

The web interface is available in several languages, looks modern, tidy and functional. The start screen displays the most important information, such as the reception strength and the data volume consumed. On request, a tariff can also be stored and thus the data volume can be limited, if necessary, the router even sends a warning SMS as soon as the volume has been used up. The settings can be used to configure various functions, for example, it is possible to set the router so that only the UMTS network or the LTE network is used. Also, it is possible in the settings to disable the LEDs on the router when they are not needed.

 

LB1111 Power over Ethernet

With LB1110, there is the sister model Netgear LB1111. Compared to the LB1110, it looks identical and offers the same functions, but it also has Power over Ethernet (PoE, ie power supply over Ethernet cable). With a PoE-capable router or switch, it is possible to operate the LB1111 modem completely without an external power supply. This is especially interesting in buildings, where there is no socket near the modem.  With an ideal placement of the modem and the power supply via PoE, one could dispense an external LTE antenna in many cases.

netgear_lb1110_lb1111-4

Conclusion: Netgear LB1110

The Netgear LB1110 modem is convincing by good reception, good speeds and easy operation thanks to modern software. The connection is stable and the status LEDs are very easy to read. If you are looking for a good LTE modem with RJ-45 LAN connection and do not want further technology such as telephone and WLAN, the LB1110 is in any case well advised.

 

The only fault: even if the maximum LTE speed of 150 MBit/s in the downlink and 50 MBit/s in the uplink would be absolutely enough, Netgear would have to face the competition from other similar faster modem such as Huawei E5771 and E5770, ZTE MF903. The similar models have inserted large battery and can work on the go. The only slightly more expensive models Netgear AirCard 790 and AirCard 810 hotspots are more powerful and support higher LTE networks.

 

Huawei Presents B5328 4 X 4 MIMO LTE Router

Around the end of 2016, Huawei offers the world’s first commercial LTE router B5328 with 4 × 4 MIMO antenna technology. The B5328 LTE Router offers significantly higher data rates in a correspondingly equipped network than devices with 2 × 2 MIMO antenna technology. The Huawei B5328 is the successor to the popular Huawei E5186 LTE Router. In the free trade, the Huawei B5328 is currently not available; however, interested network operators and service providers can order the device on request and thus make available to their customers.

Based on the GCT’s GDM7243Q, the only LTE-A chip commercially available that offers 4×4 MIMO capability, enables Huawei B5328 LTE CPE with higher data rates and throughput while using limited bandwidth (“double speed” with the same limited bandwidth), which is a scarce commodity for network operators.

huawei-b5328-b5328-155-1

By integrating the receiver with four antennas and equipping the base station with four transmitters, mobile operators can maximize the use of their spectrum. Huawei B5328 is the successor to Huawei E5186 4G LTE Router. With GDM7243Q chipset, Huawei B5328 cpedelivers LTE Category 5/6/7 throughputs with double speeds enabled by 4X4 MIMO technology, and supports Voice over LTE (VoLTE) and eMBMS (LTE broadcast) as well as other advanced features.

The Huawei B5328 was already introduced in December 2015, but so far only supplied to very few operators, as most LTE networks currently set to 2 × 2 MIMO antenna technology and the B5328 router has no appreciable advantage in such networks to the predecessor model Huawei E5186 Router. You can buy the B5328 for example in Tunisia with the provider mobilis.

Some European network operators have already carried out tests with the Huawei B5328, for example the Czech Vodafone. Vodafone has achieved test with 4 × 4 MIMO antenna technology and Carrier Aggregation around 300 Mbit/s in the downlink.

 

huawei-b5328-b5328-155-2

The Huawei B5328 has no telephone function in the currently available version B5328-155 and has only a single RJ45 Ethernet connection on the back. The WLAN module works only on 2.4 GHz (WiFi 802.11 b/g/n), the exact speed I could not find unfortunately. Basically, the B5328 appears not to be a high-end router in the face of quite meager facilities, while the previous Huawei E5186 LTE CPE had a much greater variety of functions (Wi-Fi 802.11ac and 4x Gigabit Ethernet).

The Huawei B5328 LTE router will also come to the market in Germany, Austria or Switzerland. As we know, the China Mobile will also use this device for the upgraded LTE-Advanced TD-LTE network. From today’s point of view, there is not much to be in favor, as network operators rely on 2 × 2 MIMO antenna technology, higher modulation (256QAM) and frequency bundling to increase the speeds in their LTE networks. Currently, the Huawei E5186 is still dominating the market for 2 X 2 MIMO LTE networks.

 

Four LTE Category 6 Mobile Hotspots to Recommend

LTE networks are becoming the mainstream available in many countries and areas. With LTE technology, users can enjoy high speed surfing, online games or watching videos etc..The good news is that this is not the end. The LTE technologies are also evolved to LTE advanced and it’s said the 5G network is under test now.

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-front-logo-and-screen

Currently, many carriers are trying to upgrade the LTE Category 3 or 4 to the latest advanced Category 6 with carrier aggregation technology (in short: CA). With LTE-advanced technology, the LTE data rate could be improved to double faster than that of the current LTE cat4. Theoretically, the peak download speed could reach 300mbps and upload speed to 50Mbps. Here comes a question, which device could support the LTE Cat6 advanced networks and achieve this speed? Today, we would recommend a few similar mobile WiFi hotspot supporting LTE advanced carrier aggregation technology from vendors.

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-back

Huawei E5786

Huawei E5786 should be the first LTE Cat6 mobile WiFi available in the market with Huawei own Hisilicon chipset. It has three branch models: E5786s-32a, E5786s-62a, E5786s-63a. The Huawei E5786s-63a and E5786s-62a are for the network providers in Australia and they had new name “Telstra Wi-Fi 4G Advanced Pro X” and “Optu 4G WiFi modem” respectively. There are white and black colors available. But you can get the unlocked version from www.4gltemall.com for global use. Like its predecessors Huawei E5573 and E5577, the branch models could support different LTE frequency bands for different carriers and areas. Up to 10 wireless users could connect to Huawei E5786 and surf at high speed. There is a LCD screen in the front with power button. The back cover could be removed, but the 3000mAh battery is built-in. The SIM card and Micro SD card slots could be seen when back cover removed. There are two TS-9 connectors for external 4G LTE/3G antenna.

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-back-cover

As the world’s first LTE Cat6 mobile 4G router, Huawei E5786 is the best seller in similar gadgets. If you like this mobile hotspot, you’d better to check the network frequency bands and choose the right in the branch models.

 

Check more specification and details about Huawei E5786:

http://www.4gltemall.com/huawei-e5786-4g-lte-cat6-mobile-wifi.html

 

Netgear Aircard 790s

Netgear Aircard 790s is the second LTE cat6 mobile router available in the market. Based the predecessor Netgear Aircard 782s, it looks similar to the 782s aircard. Unlike the Huawei E5786, the screen of Aircard 790s is capacitive screen, where user can operate and do simple settings for the mobile hotspot. The power button is on the top side, the bottom side has two connectors for external antenna (TS-9 type). The USB port is also special with 3.0 port, but with the device, Netgear provides the USB 2.0 cable. The back cover could also be removed, so as the battery. The battery capacity is 2930mAh. The SIM card slot could be seen after battery is pulled out. No slot for Micro SD card. With Qualcomm MDM9230 chipset, Aircard 790s could support up to 15 wireless WiFi-enabled devices. With the touchscreen, Netgear Aircard 790s is attractive for many users in practical functions.

 

Check more specification and details about Netgear Aircard 790s: http://www.4gltemall.com/netgear-aircard-790s-4g-mobile-hotspot.html

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-battery

ZTE UFi MF970

Following the steps of the above two vendors, ZTE released the UFi MF970. It looks common like its predecessor MF910. MF970 was already available for Vodafone 4G contract. The front middle is the screen to indicate the connection status. User can do simple settings through the power and menu button. The power and menu button is on the top side. The back cover can’t be removed, so the battery can’t be changed. And there are also two connectors for external LTE/3G antenna. Like Netgear Aircard 790s, there is no slot for Micro SD card. Also with Qualcomm chipset MDM9230, ZTE UFi MF970 could support up to 14 wireless users. The battery is only 2300mAh, which is much lower than the above two similar hotspots. The design of ZTE MF970 looks cool. Other features are very similar to the competitors above.

 

Check more specification and details about ZTE UFi MF970:

http://www.4gltemall.com/zte-ufi-mf970-lte-cat6-mobile-wifi-hotspot.html

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-sim-card-slot

Alcatel One Touch Y900

Alcatel One Touch Y900, also called Alcatel Link Y900 4G+, looks special in the appearance. The signal bars on the front side looks cool but are not really interesting. In all the four LTE cat6 mobile routers, the Y900 is the only which doesn’t have a LCD display. There is only a power button on the body with the WPS button on the other side of the button. The back cover could be removed for changing the battery and inserting SIM card and SD storage card. The big battery is interesting, which has 3600mAh capacity and not only working long time, but also charge other electronics to work like a power bank. What’s amazing, the Alcatel Y900 could support up to 32 wireless users to access internet. In the four devices, Alcatel Y900 seems to be the most powerful mobile hotspot. I personally like this one more.

 

Check more specification and details about Alcatel One Touch Y900: http://www.4gltemall.com/alcatel-link-y900-4g-led-mobile-hotspot.html

 

The above four LTE 4G+ cat6 MiFi hotspot should be the most popular for LTE advanced networks. You need prefer to the vendor brands, prices, or the functions. We suppose you would choose the right one for the high-speed surfing on the go!

More images about the features:

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-power-button huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-usb-and-antenna-connectorhuawei-e5786-netgear-790s-zte-mf970-alcatel-y900-usb-port

huawei-e5786-netgear-790s-zte-mf970-alcatel-y900-antenna-connectors

Netgear LB1111-100EUS 4G LTE Modem Review

At the IFA 2016, the Californian network specialist Netgear showed a new LTE modem – the LB1111 for the home use. The device has been available since September 2016 in two different versions(model LB1110 and LB1111). The user has a more economical choice without PoE or a more expensive version with PoE. The Netgear LB1111 modem can establish a connection up to LTE Category 4.

netgear-lb1111-lb1111-100eus-1

 

Features and characteristics of Netgear LB1111-100EUS
Manufacturer and type: Netgear LB1111-100EUS
Chipset: unknown
LTE category: CAT4
Download rate up to 150 Mbit/s
Upload rate up to 50 Mbps
Supported LTE bands: B3, B7, B8, B20, B40
Downwards compatible with: UMTS DC-HSPA+ (up to 42 Mbps)
Support of LTE-Advanced: No
MIMO Support: Yes
Connection for external antenna: Dual TS-9 for 4G/3G(Buy Netgear LB1111 External antenna)
Network | LAN & WLAN
LAN Ports: 1x 1-Gbit WAN
WLAN Standards: no WLAN
5 GHz WLAN Support: No
Encryption: No
WLAN Hotspot Function: No
Others
Battery pack: No battery integrated
Dimension: 120 x 99 x 31 mm at 150 g
USB: No
Memory Card Expansion: No
Release: 05.09.16
available at: www.4gltemall.com
User guide
Installation instructions: ” Download from here(PDF, 3.5 MB)
Detailed manual: »  Download from here(PDF, 3.5 MB)

 

Netgear LB1111

Power over Ethernet, or PoE for short, is the magic word that counteracts the cable dialect. The technology makes it possible to transfer power via a LAN connection in addition to the network signal. This allows the LB1111 to be operated without a connection to a commercial outlet. If you want, you can optionally access the included power supply. The 4G network is connected by means of a micro- SIM card and can provide bandwidths up to LTE Category 4. There is also an appropriate tariff required – up to 150 Mbit/s downstream and up to 50 Mbit/s in upload implemented. In addition, all essential in Europe are frequencies (800 MHz, 1,800 MHz and 2,600 MHz) supplied. If no LTE connection is available, the modem can also access 3G (HSPA+) with up to 42Mbps. In an emergency, GPRS is used. If the signal is bad at certain location, the two connectors for external antenna are available to improve the signal.

Netgear LB1111 LB1111-100EUS

 

Suitable for networking a server farm

Netgear itself underlines the business factor of the LB1111 and lists the model as suitable for the networking of server racks. Even in an office or for demonstration purposes, the device is well suited. As compatible operating systems, the manufacturer lists Windows 7, 8, 8.1, 10, Vista and XP as well as Mac OS from version 10.6.8. Furthermore, the Netgear LB1111 modem can be connected to a router or a switch, if required. This allows the LTE connection to be routed wirelessly to mobile devices such as smartphones and tablets. Practical: The Netgear LB1111 informs via an incoming SMS about an available update.

Netgear LB1111 LB1111-100EUS

Further features of Netgear LB1111

The LTE signal quality is visualized by a five-digit LED. To highlight the reception, the luminaries were made in different sizes. An active current supply and a LAN connection are also signaled by means of an LED. The only physical control element is a reset button. A network cable, a user manual and a power supply are included with the modem. If you like the Netgear LB1111 LTE Modem, welcome to buy it from www.4gltemall.com.

 

We also provide other Netgear 4G Aircards such Aircard 790s and Aircard 810s, if you like them, welcome to check more details here: http://www.4gltemall.com/4g-wireless-router/netgear-4g-lte-router.html

 

Huawei E8377 CarFi VS ZTE VFi MF905

More and more people show great dependence to WiFi, even when they are on the go, especially in a car. The manufacturers in China has notice the demand and provided solution for this. We had introduced Huawei CarFi E8377 many times in the past year. You may get familiar with it. And another Chinese vendor ZTE also provide the similar product ZTE VFi MF905 for the network demand in a car. Here come the questions: What’s the difference between Huawei E8377 and ZTE MF905? Which one is better? In this article, you will find the answer for this.

zte-vfi-mf905-vs-huawei-carfi-e8377-4gltemall

Appearance

ZTE VFi MF905 comes later than Huawei E8377, but the two mobile WiFi hotspots look alike in shape and color. They are both in black color and used for cigarette cradle in a car. There is a USB port in the body, and of course there is a slot for SIM card in the two hotspots. But the SIM card slot in Huawei E8377 is covered by a small cap. The SIM card slot in MF905 is just above the USB port.  On the top side, the logo and LED indicators are shown. The power button is at the center of the top.

huawei-e8377-carfi-hotspot-4gltemall

Technical Specifications

They are both with LTE Category 4 technology, so they can achieve peak download speed to 150mbps and upload speed to 50mbps. The transmission date rates are very good for daily surfing. But whether the surfing speed could be stable when a car is in high speed driving, it still needs time to test.

 

As a follower, ZTE MF905 could support up to 8 wireless users to access internet while Huawei E8377 supports only 10 users. But in most cases, they are enough to use in a car. There is no official saying about the WiFi coverage distance, but we suppose there is no any problem for the WiFi to cover a whole car.

huawei-carfi-e8377-sim-card-slot

Control

If user want to do some setup in the CarFi, they can connect the tablets, smartphones or PCs with WiFi and log in the web interface to setup. But here now, Huawei and ZTE also provide a new option for users. User can download the apps to setup the two CarFi. For Huawei E8377 CarFi, you may use “Huawei Mobile WiFi” app. And for ZTE MF905, the app name ZTE Link could be used for settings.

 

Frankly speaking, the two Car WiFi hotspots are very similar. We cannot tell which one is better from the specifications and features. Only the real test would tell which would have more stable and better performance. We will take a test next time in real driving situation to see this result.

zte_mf905_vfi-4gltemall

If you had read some review before, there is also other solution for the Car WiFi. The model number is Huawei E8372 and Alcatel W800. They are in the shape of USB dongle, not like the E8377 and MF905. But with the cigarette plug, it would be also OK to use in a car. If you want to know more details of them, welcome to check on www.4gltemall.com .

 

ZTE MF79 4G LTE WiFi Dongle Review

We had introduced 1&1 Mobile WLAN LTE Stick, and today we get the new ZTE MF79 LTE Dongle which is for another carrier ALTEL. On the ZTE MF79 dongle, there is the logo of ALTEL with ZTE 4G. Between them, there are two LED indicators, one for network signal and the other for WiFi.

ALTEL ZTE MF79

On the back of the USB Stick, the model number “MF79” is printed and it indicators it’s a LTE USB Modem. There is also CE number 0979 and place of origin “Made in China” with the RoHS.

 

The front cover with ALTEL logo could be removed, and below the cover, it’s the inner part with model number (MF79), SSID, Password and IMEI number. And of course, there is SIM card slot, the size is for standard SIM card. Beside the SIM card slot, it’s the slot for Micro SD card, where connected users can share files through WiFi. According to the official sayings, the ZTE MF79 could support the SD card maximum to 32GB. But there is no connector for external antenna.

ZTE MF79 BACK

 

The ZTE MF79 LTE USB Modem looks like a 4G USB dongle, but it can work like a mobile hotspot. Up to 10 WiFi enabled devices could connect to the WiFi from ZTE MF79 and access internet. Supporting LTE Category 4, ZTE MF79 could achieve peak download speed to 150Mbps and upload speed to 50Mbps. Backward with 3G UMTS and 2G GSM networks, the surfing speed could reach 43.2Mbps and upload speed to 5.76Mbps, which is good enough for most cases.

ZTE MF79 ALTEL

The functions of ZTE MF79 are very similar to the Huawei E8278 and Huawei Wingle E8372. They all look like USB Modem, but have the power to work as a mobile hotspot. Especially due to the small size, user can take them in hand or pocket easily outdoor or for business trip.

 

The ZTE MF79 is very easy to use. You can connect it to PC or directly to the power adapter which has USB plug port. Only if there is power supply, it can work as a WiFi hotspot. So the ZTE MF79 could work as a wireless router in a car if connecting to a USB plug in the car. In this case, it would be a good network solution for a car.

ZTE MF79 BACK COVER

After connected with the ZTE MF79 WiFi, you can setup the USB Dongle through Web UI. The address is 192.168.0.1 and the default password is admin to log in. User can setup for the language, connection, WiFi, and WPS. In most cases, the setup is unnecessary. It’s just plug and play. The connected user quantity is also showed in the web UI. The ZTE MF79 can also calculate the statistic for the data consumption. The SMS can also be read from the dongle.

ZTE MF79 SIM card slot

In summary, the ZTE MF79 is a good and smart mobile USB WiFi dongle for daily use at home or on the go. Supporting high speed surfing, ZTE MF79 can also share the internet with multiple users. And no setup and plug & play features makes it very friendly to users. It’s a great partner for network access!