Tag: 5g

Five LTE Advanced Pro Modules to Recommend

With the development of LTE wireless technologies, more and more networks are evolving from LTE advanced to LTE advanced Pro. LTE Advanced Pro (LTE-A Pro, also known as 4.5G, 4.5G Pro, 4.9G, Pre-5G, 5G Project, and so on) is a marker of the 3GPP release 13 and 14, which is a natural evolution of Long Term Evolution (LTE) with speed up to Gbit/s level, which incorporated numerous new technologies that would be used in 5G standard, including 256QAM, Massive MIMO, LTE-Unlicensed, LTE IoT, and others to progressively evolve existing networks into 5G standard.

LTE-A Pro aims to significantly increase the data speeds and bandwidth available for mobile communications. It will also bring a much wider range of connected devices and platforms under a single standard. LTE-A Pro seeks to improve and optimize the capacity, performance, functionality and efficiency of LTE-A, as well as to further reduce latency, to provide a better user experience. It will also enhance the LTE platform for the delivery of new services to new markets as we move towards IoT with 5G.

The key attributes that will define LTE-Advanced Pro are:

> Data speeds in excess of 3Gbps (LTE-A: 1Gbps)
> 640MHz of carrier bandwidth (LTE-A: 100MHz)
> Latency: 2ms (LTE-A: 10ms)

 

Since very few LTE Advanced pro devices are available in the market, the LTE vendors are already presenting their LTE advanced Pro modules to the public and below the five LTE advanced Pro modules are recommended if your terminals are demanding high-speed internet access:

 

  1. Telit LM960 (LTE Cat.18)

Specs Highlights:

* World’s first mPCIe form factor to support LTE cat.18

* Support global 23 LTE Frequency bands

* LTE peak download speed up to 1Gbps

* Dual SIM Single Standby

* Full GNSS support: GPS, GLONASS, Galileo, Beidou

* Chipset: Qualcomm Snapdragon X20 modem

* Linux and Windows driver support

* 4 x 4 MIMO and 256 QAM

* 5x Carrier Aggregation for increased data rates

Check more details about Telit LM960 Specs, price, drivers, and buy Telit LM960 module here: https://www.4gltemall.com/telit-lm960-4g-lte-cat18-pcie-module.html

 

  1. Sierra Wireless AirPrime EM7565 (LTE Cat.12)

Specs Highlights:

* LTE Advanced Pro Cat.12 Module

* Chipset/Processor: Qualcomm MDM9250

* DL to 600Mbps/UL to 150Mbps

* Supporting 24 worldwide LTE bands, including LTE-LAA and CBRS

* Satellite Systems: Galileo, Glonass, GPS, Beidou

* Planned Carrier AT&T, DoCoMo, Telstra, Verizon, Vodafone

* Regulatory: CE, FCC, GCF, IC, NCC, PTCRB

Check more details about Sierra AirPrime EM7565 Specs, price, drivers, and buy AirPrime EM7565 module here: https://www.4gltemall.com/sierra-wireless-airprime-em7565.html

 

 

  1. Sierra Wireless AirPrime EM7511 (LTE Cat.12)

Specs Highlights:

* Very similar to AirPrime EM7565

* LTE Advanced Pro Cat.12 Module

* Form factor: M.2

* Chipset/Platform: Qualcomm

* DL to 600Mbps/UL to 150Mbps

* Supporting 24 worldwide LTE bands, including LTE-LAA and CBRS

* Control Options: APIs, AT Commands

* Firmware over-the-air (FOTA)

* GPS, GLONASS, BeiDou, and Galileo satellite systems supported

Check more details about Sierra AirPrime EM7511 Specs, price, drivers, and buy AirPrime EM7511 module here: https://www.4gltemall.com/sierra-wireless-airprime-em7511.html

 

  1. Telit LM940 (LTE Cat.11)

Specs Highlights:

* Category: LTE Cat.11 Module

* Form Factor: PCI Express Mini Card Type (mPCIe)

* Chipset: Qualcomm MDM9240

* LTE data rates: DL 600Mbps(w/3x CA DL, 256QAM) and UL 75Mbps

* Full GNSS support: GPS, GLONASS, Galileo, Beidou

* Carrier Approvals: AT&T, Sprint, Verizon

Check more details about Telit LM940 Specs, price, drivers, and buy Telit LM940 module here: https://www.4gltemall.com/telit-lm940-lte-cat-11-gps-pcie-module.html

 

  1. Telit LN940 (LTE Cat.11 and Cat.9)

Specs Highlights:

* Two variant models: Telit LN940A9 and LN940A11

* 42mm M.2 (NGFF) single-sided data card

* LTE Category 11 LTE DL 600Mbps UL50Mbps

* LTE Category 9 LTE DL 450Mbps UL50Mbps

* HSPA+ Rel. 8: DL/UL up to 42/11.5 Mbps

* Quad-constellation integrated GNSS

* Linux and Windows driver support

* Carrier Aggregation, 2 x 2 MIMO and 256 QAM

Check more details about Telit LN940 Specs, price, drivers, and buy Telit LN940 module here:

https://www.4gltemall.com/telit-ln940-lte-cat9-11-m-2-data-card.html

Intel Release 5G Modem XMM8060 and 4G Modem XMM7660

With the development of wireless networks, 5G network is approaching. It’s said 5G networks will be available. The wireless industry leaders such as Qualcomm and Intel are planning the new products to meet the network upgrade. Last month, Qualcomm Inc. has announced that they have successfully trialed a 5G data connection on their X50 5G modem. Qualcomm says during their trial they were able to successfully establish a 5G data connection on the X50 modem using 28GHz mmWave frequency band, with download speeds reaching over a gigabit per second.

Intel is also following the trend for 5G network. A couple of days ago, Intel also announced the Intel XMM 8000 series, which is its first family of 5G new radio (5G NR) multi-mode commercial modems. The XMM8060 is the first modem of the XMM 8000 series. Intel also announced its latest LTE modem, the Intel XMM7660, which will be made available in 2019.

 

Intel XMM8060 is the company’s first commercial 5G modem as a competitor to Qualcomm X50 5G modem. As the typical feature, the Intel XMM8060 is also multi-mode supporting full 5G non-standalone and standalone NR, as well as various 2G, 3G and 4G legacy modes. Thus enabling devices to work in different locations, including large cities with 5G standalone NR (this may be a distant future) as well as rural areas that have 2G or 3G networks. This is important as 5G availability will not be available everywhere all at once, and it will take years for its roll-out to complete, just like how it took years for 4G LTE to be adopted throughout the globe. The XMM8060 is expected to be adopted in customer devices since mid-2019 at earliest. As part of the announcement, the company reiterated its plans to offer a top-to-bottom XMM 8000 family of 5G modems for various applications, including smartphones, PCs, buildings and vehicles.

Intel has kept on developing LTE modems as well. With the Intel XMM8060, the XMM7660 4G LTE Modem was also presented as its second-generation Gigabit LTE modem capable of up to Cat 19 (1.6Gbps) downlink connections. It features MIMO, carrier aggregation, 256QAM and a broad range of band support.  Intel expects commercial devices to adopt the XMM 7660 in 2019.

 

Intel says the series will enable a range of devices from PCs and phones to vehicles and fixed wireless consumer premise equipment to connect to 5G networks. And we will see when 5G coming.

Vodafone: 5G tends to be overhyped

There is a strong tendency to override 5G, said Vodafone CTO Johan Wibergh at the Huawei Global Mobile Broadband Forum (HWMBBF) in London. The expectations of 5G are partially too big, on the other hand, many applications could also be implemented with LTE. He recalled that mobile phone generations are usually around 10 years up to date you can not say what will be possible in 2030 with 5G. Wibergh made a clear statement about UMTS: the 3G mobile phone network of Vodafone should be shut down in Europe from 2020.

4G Evolution and 5G New Radio

Many features that are currently often attributed to the next generation 5G mobile phones are easily possible with LTE, according to Vodafone CTO Wibergh. Gigabit speeds, very low latency times and IoT are easily possible with the latest LTE Advanced Pro (4.5G) networks. This is achieved by technologies such as 256QAM modulation, Massive MIMO antenna technology and bundling frequency ranges via carrier aggregation. Nevertheless, 5G offers tangible advantages, of course: with additional radio spectrum (“New Radio”), first in the range around 3.5 GHz, extremely high bandwidths become possible, for example. According to Wibergh, 5G is also about 10 times more cost-efficient than LTE.

UMTS will be switched off from 2020

A very interesting statement made by Vodafone CTO Wibergh on the topic of UMTS: the 3rd mobile generation should be switched off gradually in Europe from 2020, even before GSM/2G. The radio spectrum can be used much more efficiently with LTE or 5G.

 

The shutdown of 3G is unlikely to be noticeable to users, on the contrary, the transition to new technologies will be fluid. Vodafone uses its previously used exclusively spectrum in the range of 2100 megahertz for UMTS frequency, partly for LTE. This is likely to be the case more often in the future, as long as Vodafone acquires spectrum in the 2100 MHz range at the next frequency auction.

3.5GHz May Be the 5G Frequency Band

The development of the next mobile communication standard 5G is progressing. Now it becomes clear that the frequency range of around 3.5 gigahertz will be the basis for 5G mobile networks worldwide. Confirmed Eros Spadotto from Canadian provider TELUS at the Huawei Global Mobile Broadband Forum in London. Even the network outfitter Huawei pleads for this frequency range in a position paper, summarizes it at 3.3 to 4.2 GHz but something further. Frequency spectrum in the range between 3.4 GHz and 3.8 GHz will be awarded in 2018 in many European countries, including a corresponding frequency auction is planned in Germany. In Canada, according to TELUS, an auction is expected in 2019.

 

5G Network Frequency: 3.5 GHz to start

The frequency range around 3.5 GHz will be available worldwide in many countries for mobile phone use. However, the area is not exactly defined yet, in most countries preparations are currently underway for the allocation of frequencies to the mobile network operators and the exact “limits” of the auctioned radio spectrum are not yet known. Huawei speaks in its position paper from the C-band, more specifically between 3.3 to 4.2 and 4.4 to 5.0 GHz. In order to expand 5G networks in a timely manner, the core range between 3.3 and 3.8 gigahertz is important, according to Huawei, and should be made available to network providers as quickly as possible.

 

Some carriers in Europe uses the frequency range of 3.7 GHz in its 5G test network in Berlin, where it reaches speeds of 2 GBit/s, and the range is around 400 meters. The network provider expects the launch of the first 5G networks in exactly this frequency range, more specifically between 3.5 GHz and 3.9 GHz .

5G: more frequency ranges later

Although the range around 3.5 GHz will probably be used in many countries worldwide as a “base band” for 5G: significantly more radio spectrum is needed to achieve the need for bandwidth on the one hand and very good network coverage on the other. Huawei proposes three different “layers” in its position paper: the 3.5 GHz band should be sufficient as a “coverage and capacity layer” for most applications. On the other hand, very high speeds will demand significantly more radio spectrum, which will then be made available in the “Super Data Laye ” – probably in the cmWave range around 28 gigahertz. Bruno Jacobfeuerborn, head of technology at Germany Telekom, assumes that at the start of 5G in the year 2020, this “super data layer” is not available, but only later expanded.

 

The third very important part in the 5G frequency spectrum is the so-called “Coverage Layer“. So the area with which a huge network coverage can be achieved. It does not depend on extremely high data rates, but on the fact that a basic supply of 5G can be made available almost everywhere. Huawei proposes in its position paper for the “Coverage Layer” the frequency range below 2 GHz, which is currently used by GSM, UMTS and LTE. It is conceivable, therefore, that the network operators integrated the existing LTE networks into their 5G networks, making LTE an integral part of 5G. According to Eros Spadotto, the Canadian provider TELUS assumes that the frequency range around 600 MHz will be used in North America for the “Coverage Layer” of 5G. In Europe, the area around 700 MHz is more likely to be used for this purpose.

Huawei E5186s-22a 4G LTE Cat6 WiFi Router

The Huawei E5186s-22a router is a 4G LTE category 6 router available from Huawei, replacing the popular predecessor LTE CPE B593s-22. As a large Chinese company that offers high quality network equipment, Huawei wireless routers has gain great reputation worldwide, and they also supply smartphones in very good quality too.

The Huawei E5186 4G wireless router was really the top model for making a broadband connection at home at least last year. Firstly, it has the latest 4G standard with the support of the frequencies in Europe (LTE FDD 800/900/1800/2100/2600MHz TDD 2300/2600Mhz) and especially the 4G+ LTE CAT6. This means you can use the Huawei E5186s-22a with any network providers in all the European countries. Of course, if the network is compatible, you can also use the Huawei E5186s-22a in most of the Asian and African countries, including Middle East areas.

SONY DSC

 

You can also attach an external 4G antenna to the Huawei E5186s-22a router because it has 2 SMA jacks. We had tested two external antennas (Indoor & Outdoor) for Huawei E5186 router to recommend for users who may need them:

Huawei E5186S-22a Indoor LTE antenna:

http://www.4gltemall.com/4g-antenna-two-sma-connector.html

4G LTE Indoor Antenna (2 x SMA Connectors) for Huawei/ZTE 4G LTE Routers/Gateway/LTE CPE

 

Huawei E5186S-22a Outdoor LTE antenna:

http://www.4gltemall.com/4g-lte-outdoor-antenna-2-x-sma-connectors.html

4G LTE Outdoor Antenna (2 x SMA Connectors) for Huawei/ZTE 4G LTE Routers/Gateway/LTE CPE

This E5186 router also allows you to have the latest WIFI standard, and in particular to be compatible dual band 2.4GHz and 5Ghz, the latest 802 ac is also supported.

It allows you to use an analog phone to make and receive calls from the inserted SIM card. This is crucial because operators are reluctant to use the SIM card only as a modem! It has a multilingual interface that you manage from your computer to configure your network quickly and easily (DHCP, VOIP, Firewall, consumption management etc), and it is also compatible with the mobile application Huawei Mobile WiFi for a configuration via smartphone.

You can share your 2G/3G/4G/4G+ connection in WiFi (WiFi support maximum up to 32 devices) or Ethernet (4 RJ45 sockets). In the package, there is an Ethernet cable, a user manual and an electrical adapter.

Huawei E5186 router has an on/off button which is easy to turn it off when you do not use it. Likewise, a WPS button (to connect wifi easily) is to enable/disable WiFi.

With the LTE advanced technologies, this Huawei E5186s-22a is currently not at high price comparing with the latest Huawei B618S-22d LTE router, which supports more advanced LTE technologies. Huawei E5186 4G Router is now in a really budget price, which will have good price and higher performance for faster surfing speed at home or office.

 

Huawei E5186s-22a 4G LTE Router for Home Use

Whether you had read our blog post, reports from some webistes, or other news, but you’ve surely noticed the incredible progress which has been made in mobile technology. Not long ago, 3G was the peak of the peaks, compared to 4G networks now, 5G is on the road to dominate.

 

Huawei E5186s-22a 4G LTE wireless router has been available in many countries for long time. As a pure 4G LTE router, it may not be cool like Netgear Nighthawk series router, but it do good job as expected for a 4G router.

In terms of Huawei CPE’s goals, it is no different from the similar wireless terminals used at home. Its job is to share the internet between different devices, supplementing them with a few extra amenities. Huawei E5186s-22a has more than usual gadgets that can accommodate a SIM card.

The E5186 router itself has a sleek design, much more beautiful than the predecessor 3G routers such as Huawei B683 and B970b Router. At the front, you can find a few white and mainly blue LEDs, including the power, mode, WiFi, Voice and signal indicators. The indicators tell users the current working status of the router.

 

The start-up goes exactly like a common device. Under power button, insert a SIM card, find your Huawei WiFi with your computer, enter the WiFi key on the sticker on the back of the gadget, open a browser window and enter 192.168.8.1. Here is an interface that will make you ready to complete all the security, administration, and other settings that people have on a router.

 

And that’s all we are and the internet connection would automatically be done. Of course, no matter what location you use, there is exactly the kind of network coverage or other environmental factors (walls, mountains, etc). The most important is that Huawei CPE E5186s-22a also supports the most advanced Cat6 LTE networks.

 

So far, I was pretty happy with my home provider and after running a speed test, it turned out that the download speed is far from the official saying about download speed of 300mbps. And the uploading can be done (33.57 Mbps / 16.20 Mbps / 20 ms ping), which is not quite exciting.

 

Actually, there is an alternative to provide better solutions to get a higher level LTE router such as Huawei B618S-22d. However, when ordering a new net, it is worth thinking if we are not going to do better with the 4G. Perhaps it’s not the problem of the Huawei E5186 CPE, what if the problem comes from the network environment fators?

 

Anyhow, the Huawei E5186s-22a could meet current home use for internet surfing. Even though 5G is coming, I think there is a long way to go to make the 5G devices budget and practical for common use. So let’s get E5186s-22a in white boxes, especially with a Huawei logo and a valid SIM card in them to enjoy the LTE surfing!

 

Ericsson is testing 5G network With Peak Speed to 5Gbps

According to the report from CNET, Ericsson announced yesterday that, as one part of the 5G wireless technology development plan, they get the peak transmission data rates to 5Gbps in a wireless test a couple of days ago.

 

This new is amazing if the wireless data rate reach to 5Gbps, which means the speed is 250 times faster than current LTE standard and it creates a new record for wireless link stream. Many corresponding terminals will benefit from this speed whatever smartphones, auto cars, medical and other equipments. Under the downstream of 5Gbps, it would take only 80 seconds to download a movie of 50GB, which is 5 times faster than the speed of 1Gbps from Google fiber.

 

However, it’s a pity that the 5Gbps link speed is only the speed under perfect laboratory environment and the real deployment of 5G network will start till 2020. Anyhow, this test speed provides theoretical support for future high wireless transmission.

 

Since the 5G test is under laboratory environment, there will be many works to do to universal this new network. Some professional people it’s too optimistic to deploy 5G network in 2020. But the sales management Johan Wibergh from Ericsson think it would be possible for users to access internet in this target speed, we must know it would bring a completely new network with high speed connection.

 

For Ericsson, it would be also important to get the test standard. In current wireless technology, Ericsson faces the great completion from Huawei, ZTE and other powerful vendors over the world. The latter already gain many market shares with aggressive price strategy. “This test proves, we will still be the leader from 4G network technology to 5G technology development, which is very important”, said Wibergh.

 

Ericsson had token the 5G network test with Japanese operator NTT Docomo, South Korea operator SK Telecom. And Ericsson indicates, the high penetration rate of  LTE networks in North American market will introduces the 5G technology first. But no operator in North America has any word for 5G technology till now.

 

In Europe and Asia market, LTE is still the mainstream. Some ISPs are trying to test their LTE-Advanced network on LTE category 4 or better on LTE category 6, which support peak speed to 300Mbps. This speed is far less than 5G network speed, but with the development of network upgrade, we suppose 4G network will finally jumps to 5G and 5G will become the mainstream.

 

Samsung Reach 5G Test at 1Gbps Speed and Expect to offer in 2020

The South Korean giant Samsung Electronics announced on Sunday that they forward successfully in the future development of wireless networking technology–fifth generation (5G), and it’s expected to offer this high-speed service from 2020.

This new wireless technology for mobile devices enable users to reach Internet download speeds to, for example, “a full movie in less than a second,” the company explained in a statement picked up by the Yonhap agency.

 

With the new service 5G, Samsung Mobile expects to reach speeds of tens of gigabits per second, far exceeding the current speed of 75 megabits per second achieved by the last service of fourth generation 4G-LTE (Long Term Evolution).

 

Samsung, the world’s largest supplier of memory chips and “smartphones”, managed to successfully test the new service 5G after using a frequency bandwidth of 28 GHz for transmitting data at speeds of 1 gigabit per second, something no other vendors had announced previously.

 

After testing up to 64 antenna elements, the technology giant that the device was able to exchange signals in real time under its new 5G platform, a breakthrough that estimates serve to launch this new service from 2020.

 

According to experts quoted by South Korean Yonhap news agency, with this announcement Samsung takes lead in 5G technology development towards their marketing and achieve the desired standardization of this system, called to lead the prolific mobile telecommunications market.

 

In early 2013, the European Commission announced an investment of 50 million euros to achieve propel this fifth-generation mobile technology with the intention of placing Europe at the forefront of the global mobile phone industry.

 

In addition, between 2007 and 2013, Europe spent over 700 million euros for research in mobile networks, enabling standardization great achievements as 2G GSM, still used by most of the global networks or technologies 3G and 4G.